United Kingdom
Catalog   /   Small Appliances   /   Kitchen   /   Food Dehydrators

Comparison Profit M ESP-01 vs ProfitM ESP2

Add to comparison
Profit M ESP-01
ProfitM ESP2
Profit M ESP-01ProfitM ESP2
Outdated ProductOutdated Product
TOP sellers
Typevertical fruit dryervertical fruit dryer
Drying levels7 pcs7 pcs
Total capacity35 L20 L
Power consumption820 W820 W
Specs
Thermostat
Temperature range30 – 90 °C30 – 90 °C
Location of the fan (heater)bottombottom
Controlcontrol knobcontrol knob
Overheat protection
Tray materialplasticstainless steel
Dimensions360х455х360 mm450х320х320 mm
Weight11.2 kg
Added to E-Catalogmay 2018july 2017

Total capacity

The total volume of all dryer trays. The larger the volume, the more products can be loaded into the device at a time. For modern dryers, a capacity of up to 10 L is considered relatively small, from 11 to 15 L — medium, from 16 to 20 L — high, and the largest models can hold more than 20 L.

Note that if you plan to dry several different types of fruits or vegetables at the same time, it is worth considering not only the total volume of the dryer, but also the number of trays (see above).

Overheat protection

Security system that turns off the power to the dryer when the critical temperature in the working chambers is reached. This does not only save food from overdrying, but also prevents more serious consequences in the first place, such as a breakdown or even an ignition in the dryer, which is fraught with fire.

Tray material

The material from which the complete trays of the dryer are made.

Plastic. Inexpensive, but at the same time very practical material. In terms of strength and overall reliability, the plastic is inferior to metal, however, during normal use of the dryer, this difference is not noticeable. In addition, if such trays are made in the form of complete compartments, their walls can be made transparent so that you can observe the contents without interrupting the process and without knocking down the temperature regime. However the transparent walls gradually become cloudy due to the low resistance of plastic to scratches — however, it takes a lot of time for this moment to become a serious inconvenience. Thus, most modern dryers use plastic trays.

Stainless steel. The main advantages of metal trays are strength and resistance to overheating. On the other hand, these advantages rarely turn out to be significant, and steel is more expensive than plastic. In addition, if metal trays are made in the form of separate compartments, they are opaque, and to check the condition of the products, you will have to open these compartments, lowering the temperature and disrupting the process. . For models with a rear fan (see above), this point is not relevant — they usually have a transparent door; however, such devices are not cheap. Thus, this tray material is rare nowadays — mainly among advanced dryers.
Profit M ESP-01 often compared
ProfitM ESP2 often compared