Comparison Oclean X vs Soocas X3

The number of power modes provided in the device. For flossing systems (see "Type"), this paragraph takes into account the characteristics of the irrigator; data on the toothbrush (if they differ) are indicated in the note.

It's important to distinguish between the number of power settings and the number of operating modes, as these are distinct parameters. Refer to the "Operating modes" section for details on the various modes. In this context, we emphasize that power adjustment, if available, may not be accessible in all modes. For example, in an irrigator offering two modes of operation—continuous jet and pulsation—power adjustment might only be available in the continuous jet mode.

Having multiple power settings enhances the versatility of the device. Even if a device technically offers only one operating mode, the ability to adjust the intensity of the treatment allows users to tailor the device for various tasks. For instance, in many toothbrushes, the traditional 2D brushing mode at its lowest power setting effectively serves as a gentle treatment option. However, it's worth noting that the capability to adjust power levels can somewhat increase the device's cost.

The number of brush modes provided by the device. The presence of several modes allows using the device for different procedures (for example, daily cleaning, delicate cleaning, whitening, etc.). Each such program has its own features of the working nozzle, as well as its own timer settings. The downside of such multifunctionality is the increased cost. In any case, this feature significantly expands the capabilities of the device; however, the specific set of modes may be different - it would not hurt to clarify it separately.

In this case, the mode means the general format of operation. For more information on the different formats, see "Modes" below. Note that this parameter should not be confused with the number of power settings. The latter is specified separately - see "Power modes", and in general, these characteristics are practically independent of each other. For example, a brush with one mode of operation can have several power settings. And vice versa, there may be only one power level, but several formats of operation.

Operating modes supported by the device.

Toothbrushes have the greatest variety of modes these days. In addition to the traditional (so-called "2D") daily cleaning, they can feature a 3D mode, delicate and deep cleaning programs, polishing, whitening, gum massage, and tongue cleaning. Irrigators, in turn, in addition to the standard format of operation with a continuous stream of water, most often provide a pulsation and/or spray mode.

Here is a detailed description of the most popular options found in brushes:

— Daily cleaning (2D). The operating mode is closest to traditional (manual) toothbrushes. In this mode, the bristles of the brush move in one plane; the trajectory of movement may vary, depending on the cleaning technology (see below). The intensity of action in this case is usually medium/high, so this operating format is intended mainly for relatively healthy and not too sensitive teeth. The recommended daily cleaning time is 2 minutes, 30 seconds for each quadrant of the oral cavity; the corresponding settings are usually provided in the timer (if available - see below). In general, 2D cleaning is somewhat less effective than 3D (see below), but this option can b...e provided even in the most inexpensive toothbrushes.

— Daily cleaning (3D). A function found in brushes with reciprocating-rotating and reciprocating-sweeping technology. In such models, in addition to the main cleaning technology, the bristles pulsate up and down (more precisely, into the head and back). Thanks to this, cleaning is carried out in three planes at once, which significantly improves efficiency compared to the 2D cleaning described above: the bristles not only treat the outer surface of the teeth, but also to a certain extent capture the sides and interdental space (although such cleaning is not a full-fledged replacement for the use of dental floss). The disadvantage of this function is traditional - relatively high cost.

— Gentle cleaning. A gentle cleaning program used mainly for sensitive teeth and gums prone to bleeding. In toothbrushes with reciprocating-rotating and reciprocating-sweeping cleaning technology (see below), the gentle mode most often provides for a reduced rotation/oscillation speed of the nozzle; in sonic and ultrasonic models, gentle cleaning can be ensured by reducing the amplitude of oscillations. In any case, this mode maximally eliminates discomfort during brushing and the likelihood of gum damage - even when using standard nozzles; and for the most gentle effect, it is best to use this function with a nozzle for sensitive teeth.

— Deep cleaning. Most often, this name refers to cleaning with standard intensity, but with an increased duration — for example, 3 minutes instead of the usual 2 minutes (45 seconds for each quadrant of the mouth instead of the traditional 30 seconds). This mode allows you to clean your teeth as effectively as possible and remove dirt for which regular daily cleaning is not enough.

— Polishing. A mode for treating relatively clean teeth that do not require full-scale cleaning. As a rule, polishing is performed at a reduced frequency of oscillations (rotations) and takes significantly less time than conventional treatment (for example, 1 minute instead of the traditional 2 minutes).

— Whitening. A special mode for whitening tooth enamel and removing various stains, primarily from the front teeth. It can be an extended version of the regular cleaning mode: for example, when turned on for whitening, the brush works in the regular format for 2 minutes, and then for 30 seconds in the high-intensity mode. These nuances should be clarified separately; it also does not hurt to clarify the contraindications for using this mode (especially with sensitive teeth and/or gum problems).

— Gum massage. Gum treatment can be provided as a completely separate program, or as an addition to the usual cleaning mode. This function provides not only effective cleaning, but also strengthening of the gums — it can be useful for treating inflammation and bleeding, although in such cases you should first consult a doctor.

When using irrigators, the gum massage effect is achieved by delivering a pulsating jet of variable intensity or by spraying a water-air mixture (a cloud of small droplets). For more information on these modes, see below.

— Tongue cleaning. A separate mode for cleaning the tongue. Many people find that cleaning their tongue with an electric toothbrush causes a tickling sensation that is difficult to tolerate for a long time. In light of this, this mode usually provides for a short duration of continuous treatment — about 20 seconds; if necessary, such “sessions” can be carried out several times. It is also worth mentioning that the presence of a tongue cleaning mode in itself does not mean that the kit includes a special attachment for such cleaning (see “Attachments”), although most often such a device is included in the kit.

It should be noted that in some toothbrushes, the mode change is carried out using “smart” attachments: when such an attachment is installed, the device recognizes it by the built-in chip and automatically switches to the appropriate program.

In turn, in irrigators the features of the main modes are as follows:

— Pulse. The pulse mode of the irrigator means the supply of cleaning fluid in the form of a pulsating stream. Such a flow effectively removes plaque and food debris, helps to thoroughly clean the space between the teeth, under the braces and periodontal canals (especially in hard-to-reach places).

— Jet (single-stream). Classic, most popular format of work: permanent jet with permanent pressure. Provides sufficient efficiency for most tasks for which irrigators are used, while being extremely easy to implement and can be provided even in the most inexpensive models.

— Pulsating. Water supply with variable pressure. This mode is especially effective for removing dirt from the interdental space, under braces and in other hard-to-reach places.

— Spray (atomizer). In this mode, a mixture of water and air is supplied through the nozzle, due to which, instead of a regular stream, a cloud of small drops flying at high speed is obtained at the outlet. This mode is great for gum massage and general cleaning of the oral cavity.

The frequency of sound vibrations provided by a toothbrush with a sonic operating principle. This parameter also means the maximum pulsation frequency for toothbrushes with support for pulsating cleaning technology (see above) and for irrigators with a pulsed operating mode. For dental centers (see "Type"), data on the irrigator is usually specified here, and the pulsation frequency of the toothbrush (if this parameter is relevant for it) is indicated in a separate note

High frequency of movements and pulsations(from 40 thousand/min and higher) has a positive effect on the efficiency and quality of treatment, allowing you to quickly deal with dense plaque and even tartar. On the other hand, too intensive treatment can also be undesirable - for example, with high tooth sensitivity. All this is also relevant for irrigators - except that the operating frequencies in them are noticeably lower, such devices very rarely produce more than 2 thousand pulsations per minute. So when choosing, do not chase the maximum indicators of the frequency of movements and pulsations, but first of all it is important to take into account the individual characteristics of the user - for a full guarantee, it would not hurt to consult a dentist about this.

The presence of a pressure sensor in the device — a sensor that monitors the force with which the working nozzle is pressed against the teeth/gums.

This feature is primarily found in toothbrushes, including those that are part of flossing system units (as discussed in the "Type" section), but it can also be included in irrigators. Its primary function is to prevent potential harm to the teeth and gums caused by excessive pressure during brushing. The sensor's response can vary from one device to another; some devices emit a warning signal, while others reduce the bristle movement speed, and some may even shut off entirely in response to excessive pressure.

Having a pressure sensor in such devices can be beneficial not only for individuals with healthy teeth but also for those with heightened sensitivity or gum issues. It's a highly desirable feature for maintaining oral health. However, it's important to note that in many models, the pressure sensor is not integrated into the main body of the device but is instead part of the replaceable nozzle. Additionally, not all complete nozzle options may have this function, so it's essential to verify these details separately when choosing a device.

The presence of its own display in the design of the device.

These displays are typically small due to the compact size of the toothbrush or irrigator body. They usually offer basic functionality, capable of displaying one color and a limited set of characters. However, even with such constraints, they can convey various operational information, such as the selected mode, timer countdown, battery status, error messages, and more. As a result, these displays enhance overall convenience and visibility when using the device.

On the other hand, it's important to acknowledge that there's a growing number of models without displays, especially in the mid to high-end range. This shift is primarily driven by the widespread adoption of smartphone synchronization (as mentioned earlier), which offers several advantages over built-in screens. Firstly, the Bluetooth module required for synchronization is smaller and more cost-effective than a dedicated display. Secondly, smartphone screens and other control gadgets tend to be larger, more versatile, and easier to read compared to the small screens on toothbrush or irrigator handles. Additionally, the display on the device's handle is not visible during use, whereas a smartphone can be positioned in front of your eyes. As a result, it's worthwhile to seek out a model with this function if the ability to access data from a display is a crucial factor for you, regardless of whether you...have a smartphone or another additional device at hand.

Possibility of mounting the device on the wall.

The design of the mount for these devices depends on the device type (as mentioned earlier) and how it's typically used. In the case of most toothbrushes, which are typically self-powered, they come with a wall-mounted stand that also functions as a charger. Some irrigators and dental centers follow a similar setup, but many of these devices are designed for stationary use and have a larger main unit to which a handle with a nozzle attaches. In such models, the wall mount is designed to accommodate the entire main unit.

Wall installation offers a significant advantage by saving shelf space, which is particularly beneficial in tight spaces. However, this installation method entails additional preparatory work, which can be somewhat challenging. Furthermore, not all wall mounts facilitate easy removal and installation of the device, making it less suitable for situations where you frequently need to take the toothbrush or irrigator with you on trips.

This refers to the maximum duration a device can run continuously when powered by a fully charged battery or fresh batteries. It's worth noting that this metric may also apply to models designed for mains power, such as flossing systems that include rechargeable toothbrushes, in which case we're referring to the battery life of these toothbrushes.

It's important to note that device specifications typically indicate the maximum runtime under ideal conditions, often in the most energy-efficient mode of operation (and for models with replaceable batteries, using high-quality batteries). The actual battery life can vary depending on specific usage conditions. However, this parameter still serves as a valuable basis for comparing different models. Generally, differences in the claimed operating time correspond proportionally to the real differences in battery life. For example, if one toothbrush has a stated operating time of 20 minutes and another boasts 40 minutes, in practice, their battery life (under similar conditions) will likely differ by approximately two times.

It's important to consider that, for toothbrushes, this parameter can help estimate the number of brushing sessions you can expect on a single charge. Typically, the recommended daily brushing duration is 2 minutes. So, if a toothbrush has an operating time of 30 minutes, it's sufficient for approximately 15 cleaning sessions (or more realistically, around 14 or 13).

The time required to charge the battery from zero to 100% in a device with the appropriate power type (see above). This parameter can vary from 1 – 3 hours in relatively simple and low-power devices to a day in advanced models with capacious batteries. At the same time, the longer the maximum operating time on a charge (see above), the longer, usually, the time required for charging, although there is no hard dependence here.

In general, having fast charging capabilities improves the convenience of a device by reducing interruptions in its operation. However, there is a trade-off to consider: fast charging often means either a smaller battery capacity or a higher price due to the use of specialized technologies to speed up the charging process. When evaluating this parameter, it's essential to think about how you intend to use the device. For instance, if a toothbrush or irrigator is solely used at home by one person and comes with a charging stand, fast charging may not be a critical factor. The device remains consistently charged as it's constantly on the charger, and its battery doesn't deplete significantly during one use. The time between sessions, usually around 8 to 12 hours, is more than enough to maintain a charged battery, even for devices with slower charging. However, if you plan to use the device while traveling, where access to power outlets is sporadic, it's preferable to have minima...l charging time to ensure you can recharge quickly during your trips.