Mount
Call panel installation method.
—
Mounted. Installation by hanging from fixtures placed on a wall, door frame, or other suitable location. This method is quite simple, besides, it allows you to relatively easily change the location of the device. On the other hand, it is less reliable than embedding, and it is easier for hooligans or thieves to rip such a panel from its attachment point.
—
Embedded. Installation in a niche in a wall or other surface — in such a way that only the front side of the device is outside. and any movement of the device is also fraught with serious difficulties. Nevertheless, it also has advantages: it is almost impossible to remove the call panel from a niche without a special tool, and even with tools, this task takes time and effort.
— Mounted / built-in. This category includes outdoor panels that allow both of the installation options described above. Thus, the user can independently choose a method, depending on what is more important in this case: ease of installation or its reliability.
Matrix type
Type of matrix installed in the camera of the video panel (see "Type").
— CMOS. She is CMOP. Relatively inexpensive matrices, which, nevertheless, provide good image processing speed with low power consumption, and also take up little space (which is very important for miniature cameras). Their main disadvantage is the increased tendency to the appearance of noise in the image, which is why the quality of this image is somewhat inferior to CMOS CCD.
— CCD. The Russian equivalent of the name is "PZS". Such sensors are somewhat more expensive than CMOS, due to the complexity of the design, and their size is somewhat larger. At the same time, they have more uniform characteristics and are not as prone to heat during operation, which reduces noise and has a positive effect on image quality — especially with a small amount of light.
Operating temperature
The operating temperature range of the call panel is the air temperature at which the device is guaranteed to remain operational.
If the panel will be used in a residential apartment, house, office or other premises with similar conditions, you can ignore this indicator: all modern models have a temperature range that is more than sufficient for such conditions. But if the device is planned to be installed on the street, it is necessary to make sure that its operating temperatures correspond to climatic features. It is worth noting here that nowadays panels are produced both for
very cold weather (-30 °C and below), and for
extreme heat(+50 °C and more). A high temperature threshold is also important if the device will be exposed to direct sunlight — under sunlight, the case can heat up to very high temperatures, noticeably higher than that of the surrounding air. And some models combine frost and heat resistance.
