United Kingdom
Catalog   /   Tools & Gardening   /   Machines & Equipment   /   Bench Grinders & Polishers

Comparison Sturm BG6015GR 150 mm / 350 W
230 V
vs Scheppach BGS 700 150 mm / 250 W
230 V
LED light

Add to comparison
Sturm BG6015GR 150 mm / 350 W 230 V
Scheppach BGS 700 150 mm / 250 W 230 V LED light
Sturm BG6015GR 150 mm / 350 W
230 V
Scheppach BGS 700 150 mm / 250 W
230 V
LED light
Outdated ProductCompare prices 3
TOP sellers
Machinecombo grindercombo grinder
Specs
Rotation modules22
Location of rotation modulescoaxiallycoaxially
Work partdisk / beltdisk / belt
Voltage230 V230 V
Motor power350 W250 W
Sharpening
universal
universal
Dry processing
Disc diameter150 mm150 mm
Bore diameter12.7 mm12.7 mm
Disc thickness20 mm20 mm
Disc speed2950 rpm2850 rpm
Belt length686 mm686 mm
Belt width50 mm50 mm
Belt rotation speed900 m/min900 m/min
General
LED light
Dimensions370x280x340 mm
Weight7.05 kg10 kg
Added to E-Catalogmay 2019march 2016

Motor power

Rated power of the electric motor of the machine. The more powerful the engine, the higher the speed and intensity of processing can be, the larger discs can be used with the machine and the better it is suitable for working with hard, stubborn materials. On the other hand, a powerful motor consumes a lot of energy (which may require special connection — see "Power") and significantly affects the dimensions, weight and price of the entire unit. Therefore, manufacturers choose this parameter based on the type (see "Machine") and the desired characteristics of speed, productivity, etc. In fact, this means that engine power is rather a secondary parameter, and when choosing, it makes sense to pay attention to more practical points — disk diameter, rotation / movement speed, etc.

Disc speed

The nominal speed of rotation of the disk for dry processing (see above), provided by the machine; for models with adjustable rotation (see below), the maximum rotation speed.

For the same disc diameter and material, a higher speed provides more intensive processing, and a slower rotation contributes to accuracy and precision. In addition, optimal speeds depend on the composition of the disc and the material being processed; detailed recommendations with specific figures for a particular situation can be found in special sources.

A separate category is grinding machines with disk-shaped working elements: in such units, the actual speed of movement of the disk surface relative to the workpiece depends on how close the contact point is to the centre of the disk.

LED light

The presence of its own illumination in the design of the machine. Usually, such a system takes the form of a lamp attached to the body with a flexible leg. It allows you to brightly illuminate the work area, which is important not only at dusk or darkness, but even in daylight (protective covers and other parts can greatly obscure the working element of the machine).
Sturm BG6015GR often compared
Scheppach BGS 700 often compared