United Kingdom
Catalog   /   Tools & Gardening   /   Construction Power Tools   /   Paint Sprayers

Comparison Auarita MP-500-1.3 vs Auarita L-897-1.3

Add to comparison
Auarita MP-500-1.3
Auarita L-897-1.3
Auarita MP-500-1.3Auarita L-897-1.3
Outdated ProductOutdated Product
TOP sellers
Devicepaint sprayerpaint sprayer
Typepneumaticpneumatic
Specs
Rated pressure2 bar1.5 bar
Air consumption226 L/min255 L/min
Nozzle size1.3 mm1.3 mm
Sprayingpneumaticpneumatic
Spray systemLVLP (Low Volume Low Pressure)/Trans-TechLVLP (Low Volume Low Pressure)/Trans-Tech
Containertoptop
Container volume600 mL600 mL
Tank material
plastic /aluminium/
plastic /aluminium/
Added to E-Catalogjuly 2017july 2017

Rated pressure

Nominal air pressure in the spray gun.

The general meaning of this parameter depends on the type of instrument (see above). So, in pneumatic models, nominal pressure data is required for connection to an external compressor. It is this pressure that this compressor must create at the inlet to the atomizer; too low values will lead to a decrease in efficiency, too high are fraught with breakdowns and even accidents with injury to others.

In turn, for electric models, the nominal pressure is the air pressure created by the unit's own compressor; the complete atomizer was originally designed for the same pressure. So in this case, this parameter is more of a reference than practically significant; it may be useful only for connecting replacement nozzles to the compressor (or vice versa, for using an existing nozzle with a third-party compressor).

As for specific pressure values, they are primarily determined by the spray system (see below). The diversity here is quite high: the most modest units give out less than 2 bar, 2-5 bar compressors are quite popular , 5-10 bar models are relatively rare, and some powerful performance solutions provide a pressure of 100 bar or more.

Air consumption

Nominal air flow rate when the spray gun is operating in normal mode.

This parameter is of key importance for a pneumatic tool (see "Type"): the compressor to which such a sprayer is connected must provide the appropriate air supply rate, otherwise normal operation will not be possible. In turn, in electric models, this indicator is more of a reference — the complete compressor, by definition, corresponds to the characteristics of the sprayer, and it makes sense to pay attention to the flow rate only if the working nozzle of the electric spray gun is planned to be used with a "non-native" compressor.
Auarita MP-500-1.3 often compared
Auarita L-897-1.3 often compared