Comparison Top Tools 38D515 vs Intertool ET-5126

The total number of core items included in the set.

In this case, the main items are all devices that are directly used during work: non-separable tools (traditional wrenches, hammers, pliers ...), elements of collapsible tools (for example, a ratchet for removable heads and 5 such heads will be considered 6 units) , as well as accessories (such as extensions or universal joints). Additional accessories — such as lights — may or may not be included in this count, depending on the manufacturer; however, there are usually few such accessories, and they do not fundamentally affect the total number of items.

The most modest modern tool kits include up to 25 units. However, such kits are very popular — they are inexpensive and at the same time can be very versatile. 25 – 50 items is still quite a small number, 50 – 75 pcs can be called an average, 76 – 100 items are more than average, and the most extensive modern sets can include 100 – 150 items or even more.

The general rules for choosing this parameter are obvious: a more extensive set, usually, is more multifunctional, but more expensive, weighs more and takes up more space. It is also worth bearing in mind that with a similar number of items, the specific assortment of these items in differ...ent sets may be different; so when choosing, it is worth specifying not only the number of tools, but also their specific composition.

The size of the "seat" for which the socket heads included in the package are designed (see below), in other words, the size of the square hole on the back of the head used for installation on a ratchet, wrench or other similar tool. Accordingly, the tool for working with heads supplied in the kit has the same dimensions of the landing square; and in the absence of such tools in the kit, data on the size of the heads will be useful for its selection.

There is a generally accepted standard for these sizes, providing for the designation in fractions of an inch — from 1/4 "to 1". Thanks to this, heads and tools from different sets can be quite compatible — just matching in size is enough. Most often in modern hand sets there are options in 1/4 "and 1/2", a little less often — 3/4" and 3/8". Some sets include several variants of the landing square at once.

Number of hex sockets included in the tool kit.

All end heads are accessories for a collapsible tool; during operation, they are mounted on a ratchet, wrench or other similar device. The head itself has the appearance of a characteristic “cap”, which, during operation, is put on a bolt, nut, etc. This design, among other things, allows you to work with parts located in recesses and some other hard-to-reach places that cannot be reached with open-ended, captive or split keys. And compared to a set of classic socket wrenches, the holder plus socket set takes up much less space, providing almost the same functionality.

As for the 6 faces, this type of socket head is the most famous and widespread, because. most modern nuts and bolts have this shape.

The number of spark plug heads supplied with the tool kit.

Like all interchangeable heads, candlesticks are put on the appropriate device during operation — for example, a ratchet (see above) or a tap wrench (see below). The specifics of their use is reflected in the name: the main purpose of this type of nozzle is the installation and dismantling of spark plugs in automobile engines. By design, spark plug sockets are generally similar to end heads, but they are much longer — otherwise working with candles would be impossible.

There is no single standard for fastening modern spark plugs, so several spark plug heads can be supplied in a set. At the same time, note that with the same number of such accessories, their specific types in different sets may be different; this nuance needs to be clarified before buying.

The number of bits supplied with the tool kit. A bat in this case is called a working nozzle, which plays the role of a screwdriver tip; in fact, they are most often used with screwdriver handles (see above).

Many types of splines (slots) are used in modern fasteners — starting with the well-known straight, cross-shaped ( Phillips and Pozidriv), Torx sprockets and ending with exotics like Torq-set (a cross with lines shifted from the centre), Pentalobe (with five ledges), etc. .P. In addition, the size of the slots can also vary, and in many cases, tool matching in size is very important. Accordingly, the more bits supplied with the set, the more versatile it is, the higher the probability that it will contain a nozzle of the desired type and size. However, the specific list of bits in the kit also does not hurt to clarify — in order to make sure that it has all the varieties you need. In the characteristics of individual sets, these data are given in the paragraph "Bit sizes" (see below).

Varieties of bits (see above) included in the set.

Note that this paragraph specifies not just the size, but also the type of slot for which this or that bit is designed. This type is indicated by a letter index followed by a number describing the size — for example, SL5. Here are the most popular designations found in modern bits:

— SL. Flat bits for straight slot. The size is indicated in millimetres.
— Ph. Classic cross bits. The size is indicated by a conditional number.
— P.Z. Bits for a modified cross slot with improved engagement, have additional edges. The size is indicated by a conditional number.
— TX, T. Torx bits, with six-pointed sprocket tips. The size is indicated by a conditional number.
— H. Hex bits, with hex tips. The size is indicated in millimetres.


If there is more than one bit of a certain type in the set, the number is specified after the designation, for example, PH2x2.

An adapter for docking seemingly incompatible elements from a set. For example, socket heads with an unsuitable landing square on a ratchet, screwdriver handle or in a drill driver. The adapter provides full-fledged work with all the required list of tools from the set.

The number of knobs supplied with the tool kit.

The collars are a composite tool and are used exclusively in combination with various nozzles, and sometimes with bits. As the name implies, they are designed to rotate such nozzles; moreover, the common point for all the knobs is that the nozzle is located perpendicular to the handle — this provides a large lever arm length and high torque with a relatively small effort on the handle. The specific design of the collars may be different. One of the most popular options is T-shaped devices, which can also vary: the nozzle mount can be located in the centre of the handle or closer to one of the edges, it can be movable or fixed, removable or non-removable, etc. There are also L-shaped collars, similar to socket wrenches (see above) with interchangeable nozzles; cardan, in which the mount is located at the very end and can be rotated to a selected angle, etc. If there are several wrenches in the kit, they usually have the same design, and the main differences are in the length of the handles, as well as the types and sizes of attachments for nozzles.

Note that in some sets, the role of a wrench can be played by a rigid extension (see below), equipped with a removable mount for the nozzle, and when such a mount is installed, it turns into a wrench handle. Such a device, when calculating the total number of units (see above), is considered as one item, although it performs two...different functions and is indicated in our catalog as both a crank and an extension.

Number of combination wrenches supplied with the kit. Note that some modern kits include only combination wrenches, without any other fixtures or accessories.

Combined are called bilateral keys, on which different types of working profiles are located on different sides. Most often, such keys combine open-end and cap profile, very rarely — open-end and end. The technical features of each of these types are described in the corresponding entries in the glossary. However, anyway, the working dimensions of the profiles in one tool, usually, are the same — this allows, without changing the key, to choose the best option for a specific part, depending on the features of the work. As for the quantity, it is worth considering here: sets with the same number of keys of the same type may differ in the specific sizes of these tools. Such nuances should be clarified before buying separately.