United Kingdom
Catalog   /   Large Appliances   /   Integrated Appliances   /   Integrated Dishwashers

Comparison Bosch SCE 52M55 vs Bosch SKE 52M55

Add to comparison
Bosch SCE 52M55
Bosch SKE 52M55
Bosch SCE 52M55Bosch SKE 52M55
from $512.44
Outdated Product
from $478.72
Outdated Product
TOP sellers
Type of instalationsemi-integratedsemi-integrated
Number of place settings86
Water consumption9 L8 L
Dryer typecondensercondenser
Inverter motor
Energy classA+A+
Noise level47 dB47 dB
Washing functions
Number of programmes
/5 temperature settings/
5
Washing modes
quick wash
automatic
eco
delicate (for glass)
intensive
quick wash
automatic
eco
delicate (for glass)
intensive
3-in-1 tablets use
More features
Delayed start timer
Salt indicator
Rinse aid indicator
Leak protection
 /AquaStop/
 /AquaStop/
Door closer
More specs
Controlspush-buttonspush-buttons
DisplayLEDLED
Child lock
Dimensions (HxWxD)60х60х48 cm45х60х50 cm
Cut-out height590 mm450 mm
Cut-out width600 mm560 mm
Cut-out depth500 mm500 mm
Color
Added to E-Catalognovember 2013november 2013

Number of place settings

The maximum number of dish sets that can be loaded into the dishwasher at one time. A set is considered a set of dishes for one person: four plates (for the first course, for the second course, salad, bread), a plate for dessert, a cup, a spoon and a fork.

The large capacity allows you to wash numerous dishes in the device at one time without starting the washing programme again. At the same time, excess capacity is just as undesirable as insufficient. Firstly, a capacious operating chamber affects the dimensions of the entire device. Secondly, such units consume more water. Thirdly, if there is not much dirty dishes, you either have to wait until it accumulates, or start an underloaded device, wasting water and detergents. Therefore, when choosing according to this indicator, real needs must be taken into account and not chase after the maximum capacity.

Water consumption

The amount of water used by the dishwasher in one washing cycle. Usually, it is indicated for a standard cycle — at full load, without pre-rinsing, etc. Accordingly, in special modes, the consumption may differ from the indicated one.

The lower the consumption — it better; this is especially true for those who consume water by metres or who have a limited supply of water (for example, it is drawn from a well with a low productivity). On the other hand, a reduction in consumption can have a negative effect on the quality of the wash. So, choosing an economical dishwasher, you should pay attention to the washing class (see below). In addition, only models of the same capacity can be compared in terms of consumption — after all, the more dishes, the more water is required to wash them.

Dimensions (HxWxD)

Dishwasher dimensions in height, width and depth. An obvious parameter; we only note that when determining the amount of space required for integration, the width and height of the unit are important.

In most modern built-in dishwashers, the width corresponds to one of the standard values (about a centimeter): 45 cm for narrow models, 60 cm for standard ones and 55 cm as a compromise between these dimensions. As for the second dimension, dishwashers with a height of up to 60 cm inclusive are usually classified as compact, they require installation at a certain height above the floor. Full-size models, with a height of more than 60 cm, can also be installed at floor level.
Bosch SCE 52M55 often compared