United Kingdom
Catalog   /   Large Appliances   /   Integrated Appliances   /   Integrated Dishwashers

Comparison Electrolux ESL 4500 vs Electrolux ESL 4300

Add to comparison
Electrolux ESL 4500
Electrolux ESL 4300
Electrolux ESL 4500Electrolux ESL 4300
from $237.67 up to $369.36
Outdated Product
from $405.84 up to $545.72
Outdated Product
TOP sellers
Type of instalationfully integratedfully integrated
Number of place settings99
Water consumption9 L9 L
Dryer typecondensercondenser
Energy classA+A
Noise level46 dB49 dB
Washing functions
Number of programmes
/5 temperature settings/
/4 temperature settings/
Washing modes
pre-rinse
quick wash
automatic
eco
intensive
pre-rinse
quick wash
automatic
eco
intensive
3-in-1 tablets use
More features
Delayed start timer
 /up to 6 hours/
End-of-cycle signal
Beam on floor+
Salt indicator
Rinse aid indicator
Leak protection
More specs
Controlspush-buttonstouch controls
DisplayLEDLED
Dimensions (HxWxD)82х45х55 cm82х45х55 cm
Cut-out height820 mm820 mm
Cut-out width450 mm450 mm
Cut-out depth550 mm570 mm
Added to E-Catalogdecember 2013december 2012

Energy class

The energy efficiency class characterizes the the economy of a dishwasher's electricity consumption. Initially, the classes were denoted in Latin letters from A (high degree of economy) to G (high consumption). But later, with the development of energy saving technologies, more advanced classes than A appeared. They are denoted by the letter A with a certain number of pluses (A+, A++, etc.); the more benefits, the higher the economy. Most modern built-in dishwashers comply with energy classes from A to A+++(the last is 30% more economical than the original class A). More high consumption models, such as classes B and C, are much rarer and gradually disappear.

More economical models cost more, but the difference can be recouped in energy savings. Also note that the energy consumption class does not describe efficiency in general, but in comparison with other similar models; therefore, the actual consumption of a small class A device may be lower than that of a large class A++ model.

Noise level

The approximate noise level produced by the dishwasher during operation. In modern models, this parameter can range from 37 – 39 dB (muffled human voice) to 59 – 60 dB (loud conversation); more detailed decoding of what sound corresponds to a particular number of decibels can be found in special tables. Anyway, the low noise level contributes to the comfortable use of the device. It is especially important if the dishwasher is to be used at night (for example, if there are reduced electricity rates at night).

Number of programmes

The number of washing programs (modes) provided in the dishwasher. These programs may differ in duration, exposure intensity, water temperature, dish material (for example for delicate dishes), etc. For more information on the different options, see "Washing programs". And the more modes — the more advanced the device is, the more options it provides to choose from. But note that with the same number of programs, their specific set in different models may be different; these details should be clarified separately.

End-of-cycle signal

Sound signal, indicating the end of the dishwasher operating. Many dishwashers work quietly and without a special signal, it can be difficult to determine whether the programme has ended.

Beam on floor

The light indicator of work of the dishwasher. During the operation of the device, a special light mark is projected onto the floor in front of it; at the end of the programme, this mark goes out. Thus, one glance in the direction of the device is enough to determine its current state. And for fully integrated models (see "Type of installation"), this function is also convenient because it is no need to open the door to check the status of the device. Actually, the vast majority of units with a "beam on the floor" are fully integrated.

Also note that in high-end dishwashers, not just a light mark in the form of a dot can be used, but a miniature projector, which is a beam on the floor with a time indication or with other auxiliary information.

Controls

Rotary switch. Rotary switch control. Usually, it is not the only one control: the rotary knob is used to select the operating mode, and the remaining functions of the dishwasher (start-stop programs, timers, etc.) are controlled by buttons. However, panels with rotary switches still have their own specifics, so they are distinguished as a separate type of control. Technically, this option can be used in dishwashers of all price categories, but for a number of reasons, it is found mainly in inexpensive models.

Push-buttons. Controlled by classic mechanical buttons. This option allows you to work even with the very advanced and extensive functionality that is typical for premium dishwashers, while the buttons are cheaper than the touch panels (see below). Therefore, push-button control can be found in all classes of dishwashers, from low-cost to top-end ones. Its main disadvantage is the presence of slots between the buttons and the panel in comparison with the same sensors, where dirt can clog and cleaning out it can be quite difficult.

— Touch. Control systems with sensors. These controls are easier to operate than simple buttons (see above) — instead of pressing, a light touch is enough. All sensors can be made under the same plane, which makes it easier to clean the control panel and reduces the number of places where dirt can clog. Do not forget t...hat such control gives the dishwasher a modern and advanced look. On the other hand, sensors are more expensive than other types of control, and therefore are used mainly in high-end models.
Electrolux ESL 4500 often compared
Electrolux ESL 4300 often compared