Comparison Lishitoys Phantom 6010 vs Syma S110G

Helicopter rotor(s) diameter. In fact, this parameter primarily determines the dimensions of the machine in the working position; this is especially true for three- and four-bladed models, where the propeller cannot be deployed along the fuselage, reducing the width of the space occupied (although the blades can be folded, which eliminates this drawback). Otherwise, the diameter of the rotor is of secondary importance: it is selected by the manufacturer in such a way as to provide features corresponding to the class of the machine, and it is worth focus primarily on the general purpose and price category of the helicopter, and not the size of the propeller.

The diameter of the tail rotor in machines of the classical scheme (see below). This parameter is of practical importance only in professional aircraft modeling sports, and even then quite rarely; relevant moments are described in special sources.

The number of control channels provided in the radio-controlled model.

Each such channel is responsible for a separate control function: the operation of the rudder, elevators, etc. For the simplest models, 2 – 3 channels are enough. Full control requires more channels. In advanced models, additional channels may be provided, the total number of which can reach 6 or more.

The capacity of the battery supplied with the electric motor model (see "Motor"). Indicated only for variants using branded batteries (see "Battery type"), measured in ampere-hours: 1 Ah corresponds to the capacity at which the battery is capable of delivering a current of 1 A for 1 hour.

The higher the battery capacity, the more time the helicopter can spend in the air, usually. However, the practical time of operation on a charge is largely determined by other characteristics of the machine — dimensions and weight, engine model and power, etc. Therefore, in most cases, this parameter plays a purely reference role, and only helicopters that do not have any significant differences in other characteristics (and even then very approximately) can only be compared in terms of battery capacity.

Operating time of an electric powered helicopter (see "Engine") on one battery charge or on one set of batteries. This parameter is rather conditional and approximate: it is usually indicated for optimal operating conditions, with a uniform low load on the engine (most often for hover mode), and when using replaceable cells — for high quality batteries. Accordingly, in fact, the operating time may differ markedly from that stated in the specifications. Nevertheless, this indicator quite reliably describes the battery life of the car, and different models can be compared according to it.

The frequency at which the helicopter control transmitter operates.

— 27.145 MHz. One of the frequencies used for radio remote control for a long time; in some CIS countries it is even reserved by state regulatory bodies for this very purpose. Such transmitters are relatively inexpensive, but suffer from one serious drawback: they do not provide channel separation when several consoles are operating in close proximity to each other. In other words, if the helicopter stays in the coverage area of two transmitters, the signals from them will be mixed, which is actually equivalent to a loss of control. This is most often unimportant in "recreational" flights; however, at competitions and other public events where several cars can be in the flight zone at the same time, very unpleasant and even dangerous situations can arise. You can avoid such situations by developing a common frequency grid and using interchangeable crystal oscillators for consoles — but such features are not always available. As a result, this frequency is gradually being replaced by the more advanced 2.4 GHz standard, not only among professional, but also among amateur models.

Separately, we note that transmitters with frequencies of 35, 40 and 75 MHz can also be found on the market; according to the main features, they are completely similar to the described 27.145 MHz and differ only in the operating frequency.

— 2.4 GHz. Today's most advanced communication standard used by remote control helicopters. Its main feature (and difference from the above options) is the possibility of normal operation of several transmitters of this format in close proximity to each other. To do this, various technologies are used that provide automatic distribution of receiver-transmitter pairs over their own channels (similar to how it happens, for example, in mobile communications). Theoretically, the 2.4 GHz band may be more prone to interference, as many modern electronics work in it (in particular, Wi-Fi and Bluetooth modules); however, thanks to the distribution of channels mentioned, such problems arise only in very unfortunate cases, but are solved easily and quickly. In addition, due to the coincidence in frequencies with the Wi-Fi standard, models for such remotes can be easily controlled from a smartphone (see below).

The greatest distance between the remote control and the helicopter at which the remote control transmitter is still able to guarantee normal controllability of the model. Note that official specifications usually provide data for perfect conditions: full battery charge, no obstacles in the signal path, extraneous interference, etc .; in fact, the range may be somewhat less. However, by this parameter it is quite possible to compare different models with each other.

The higher this indicator, the further you can let go of the helicopter from the remote control, the less often you have to move to keep control. However, a large range means not only a long range as such — it also speaks of a good signal penetration, its ability to pass through various obstacles. At the same time, powerful transmitters require appropriate power and large antennas, which affects the weight and dimensions of the console.

General dimensions of the model. Note that the length and width are indicated only for the fuselage, excluding the main rotor. However, for ease of transportation, the blades are often made removable or folding.