Comparison Sturm BC1212 vs RS JS-141
Add to comparison |  |  |
|---|---|---|
| Sturm BC1212 | RS JS-141 | |
| Outdated Product | Outdated Product | |
| TOP sellers | ||
| Device | booster | booster |
Specs | ||
| Battery voltage | 12 В | 12 В |
| Rated starting power | 300 А | 200 А |
| Peak output current | 400 А | 400 А |
| Built-in battery capacity | 12000 mAh | 14000 mAh |
Charging gadgets (outputs) | ||
| DC connector for gadgets |  | |
General | ||
| Built-in flashlight | | |
| Power source | 12/230 В | 12/230 В |
| Size | 225x192x80 mm | 165x35x85 mm |
| Added to E-Catalog | april 2019 | october 2018 |
Compare Sturm BC1212 and RS JS-141
You may be interested in
Sturm BC1212 often compared
Glossary
Rated starting power
Nominal starting current of the starter charger or booster (see "Type").
In this case, it refers to the current that the device can deliver in engine starting mode for a relatively long period (at least 30 seconds, or even more). This indicator should not be lower than the nominal starting current consumed by the car's starter — otherwise, the device simply will not have enough power for effective starter cranking and engine starting. Information about the required starting current can be clarified by the car's documentation or by the specifications of the standard battery used in it. For most passenger cars, this figure ranges from 200 to 400 A; less powerful starting devices are mainly intended for motorcycles and other similar vehicles, while more powerful ones are for buses, trucks, and other heavy equipment, among such "starters" there are models for 400 – 600 A and even over 1000 A.
In this case, it refers to the current that the device can deliver in engine starting mode for a relatively long period (at least 30 seconds, or even more). This indicator should not be lower than the nominal starting current consumed by the car's starter — otherwise, the device simply will not have enough power for effective starter cranking and engine starting. Information about the required starting current can be clarified by the car's documentation or by the specifications of the standard battery used in it. For most passenger cars, this figure ranges from 200 to 400 A; less powerful starting devices are mainly intended for motorcycles and other similar vehicles, while more powerful ones are for buses, trucks, and other heavy equipment, among such "starters" there are models for 400 – 600 A and even over 1000 A.
Built-in battery capacity
Capacity of the own battery provided in the design of the starter-charger.
As a rule, boosters and launchers with a power bank function are equipped with their own batteries (see “Type”). The main purpose of such a battery from the point of view of helping to “light up” is to provide the power necessary to start the engine. However, in some models the battery is responsible for other functions, such as the built-in compressor or flashlight. The larger the battery capacity, the longer the device can operate, and the more tasks it can perform on a single charge.
In starting devices with the powerbank function, this parameter is also given to estimate how much energy the battery can accumulate and then transfer to connected gadgets. It is important to consider that there is a nominal (declared) and real capacity - the latter is always less, because it takes into account the inevitable losses during energy conversion. Typically the difference is from 30 to 40%, i.e. a model with a conventional battery capacity of 10,000 mAh will not fully charge a smartphone with a 3,000 mAh battery three times, but at best will provide two power cycles, because in practice its working capacity is about 6,000 mAh. Therefore, it is not entirely correct to compare the mAh values of your gadget’s battery with the nominal capacity of the built-in battery - you should definitely take into account that the real capacity is always less than the “rated” one.
As a rule, boosters and launchers with a power bank function are equipped with their own batteries (see “Type”). The main purpose of such a battery from the point of view of helping to “light up” is to provide the power necessary to start the engine. However, in some models the battery is responsible for other functions, such as the built-in compressor or flashlight. The larger the battery capacity, the longer the device can operate, and the more tasks it can perform on a single charge.
In starting devices with the powerbank function, this parameter is also given to estimate how much energy the battery can accumulate and then transfer to connected gadgets. It is important to consider that there is a nominal (declared) and real capacity - the latter is always less, because it takes into account the inevitable losses during energy conversion. Typically the difference is from 30 to 40%, i.e. a model with a conventional battery capacity of 10,000 mAh will not fully charge a smartphone with a 3,000 mAh battery three times, but at best will provide two power cycles, because in practice its working capacity is about 6,000 mAh. Therefore, it is not entirely correct to compare the mAh values of your gadget’s battery with the nominal capacity of the built-in battery - you should definitely take into account that the real capacity is always less than the “rated” one.