United Kingdom
Catalog   /   Office & Stationery   /   Printing & Polygraphy   /   3D Pens

Comparison Polaroid PLAY vs Myriwell RP200B

Add to comparison
Polaroid PLAY
Myriwell RP200B
Polaroid PLAYMyriwell RP200B
Outdated ProductOutdated Product
TOP sellers
Main
Plastic feed speed adjustment. Automatic filament ejection after 10 min. inaction. Mains powered and via USB. Stand for vertical parking handles.
Product Typehot printinghot printing
Filament MaterialPLA
PLA /+ PCL plastic/
Min thread diameter1.75 mm1.75 mm
Nozzle Diameter0.6 mm0.7 mm
Print Speed40 mm/s
Features
Temperature Adjust
Number of Speeds43
USB powered
Auto Power Off
Display
General
Tip Materialceramicsceramics
Stand
Country of brand originUSAChina
Dimensions185x35x45 mm187x44x30 mm
Thickness35 mm30 mm
Weight150 g96 g
Added to E-Catalogjuly 2017march 2017

Nozzle Diameter

The diameter of the nozzle provided in the pen.

The larger the nozzle, the thicker the lines produced by the pen will be (ceteris paribus; the actual thickness of the lines will also depend on the type of plastic and the adjusted temperature). In the thinnest models, the nozzle diameter is less than 0.5 mm, in the thickest models it is about 0.9 mm. Most modern 3D pens have nozzles in the range of 0.6 – 0.7 mm — this value is considered the most versatile and convenient for practical use.

Print Speed

The material feed rate provided by the pen. The higher this speed, the faster you can work with this model; on the other hand, the rapid supply of material requires increased accuracy and serious skills. The maximum value of this parameter in modern 3D pens is about 40 mm/s. Models with adjusted speed is also available (see below); for them, usually, the highest speed of operation is given in the specs.

Number of Speeds

The number of fixed speed settings provided in the pen. This spec is specified only if there is more than one such setting.

The speed control allows you to adjust the mode of operation to the circumstances: for example, a low speed will be convenient for fine work, and a high speed is so for large elements. And the more speed settings there are in the pen, the wider the choice for the user to configure the device more accurately. In the most advanced models, the number of speeds can reach eight.

Note that the speed adjust can be not only stepwise, but also smooth (see above).

Display

The availability of a built-in display. Usually, these are the simplest single-colour screens that display the basic operating parameters — speed and/or temperature. However, even such a display makes the pen more convenient and allows you to get important information about its operation.

Country of brand origin

The country of origin indicated in the specifications of the device. Note that this is far from necessarily the place of actual manufacturing: frequently the “homeland” of the brand or the location of the manufacturer’s HQ is indicated as the country of origin of products. Additionally, giving the importance to this parameter, it should be taken into account that many “national” stereotypes are unfounded: in the modern world, the quality of a product depends not so much on its country of origin, but on the price category and the overall reputation of the manufacturer. So, paying attention to the country of origin makes sense only if you fundamentally want (or do not want) to support a brand from a certain country.
Polaroid PLAY often compared
Myriwell RP200B often compared