Comparison Grohe New Tempesta System 200 27389002 vs AM-PM Like F0780900

The size of the overhead shower head supplied in the set (see "Complete set"). For round watering cans, this paragraph indicates the size, for other shapes - the length (the largest of the two main sizes).

The larger the overhead shower - the more space it covers, the easier it is to "fit entirely" under the jets and the higher the throughput can be (see "Water consumption overhead shower"). On the other hand, the cost of a watering can directly depends on the dimensions. As for specific figures, the size up to 20 cm is relatively small, although such watering cans are very popular due to their availability and low consumption. Models 21 - 25 cm can be classified as medium, 26 - 30 cm - relatively large, and the largest watering cans for the overhead shower have dimensions of more than 30 cm.

The number of settings provided in the hand shower for top shower (see "Complete set").

If you have several settings, change the jet features and, accordingly, adjust the shower to the user’s wishes. For example, one watering can provide «rain» (ordinary drops of medium size), «waterfall» (stream in the form of water wall) and «stream» (continuous jet under high pressure); there are other modes, their specific set for each model is worth specifying separately. In any case, the more settings - the wider the choice of the user, but the more expensive and more difficult the watering can be on the background of models with one mode upper shower.

The top shower angle is tilted in both directions. Not all models have adjustment, and even those in which it is constructively laid have different angles. By itself the ability to adjust the inclination angle of the upper shower allows you to adjust the flow of water to the desired side for the needs of a particular user.

The size of the manual or hygienic shower head can be found (cf. «Complete»), which is equipped with a shower system. In fact, it implies the size of the working area - the area on which the nozzles for water supply are located. If this area is round or square, its size is indicated by diameter or width, for other shapes - by length.

Big size allows to cover more space at once; on the other hand, more compact models are more efficient, and cheaper, all other things being equal. And hygienic watering cans, taking into account the specifics of their use, by definition are made small.

The number of jet settings provided in the complete manual or hygienic watering can (see "Complete set"). However, hygienic leukemias are usually made single-mode - this is quite enough considering the application. But in conventional manual waterjets can be several, which allows you to change the characteristics of the jet at the request of the user - for example, instead of the usual thin jets, turn on a hard jet from a single large nozzle or a solid «soft» Flow from water filled with air bubbles. The specific set of settings can be different, it is worth to refine separately. However, in any case, the more options - the wider the choice of the user and the more complicated and more expensive the watering box itself.

The throughput capacity of a manual shower watering agent, in other words, the amount of water it gives out per minute when the faucets are fully open. Since the capacity is not only related to the design of the watering box, but also to the pressure in the water supply, it is customary to specify an average value - at a standard pressure of 3 bar.

The higher this parameter - the more intense the impact on the body can have a shower. At the same time, high water consumption can become a problem when there are water meters or when there are limited supplies - for example, if hot water is supplied by a boiler. Also note that , low throughput can be compensated by certain jet settings.

The length of hose for the shower head be supplied with a shower system of one type or another (see above). In most modern models, this parameter is about 140 - 160 cm - it is enough that even a tall man could easily rinse completely, from the top. In addition, some hoses can stretch 20-30% of their original length. So in practice, it is worth paying attention to the length of the hose except in special cases - for example, if the system is bought for a very spacious bathroom and you need a shower with an increased «radius of action».

— Double lever. Classic version with two separate swivel taps, one of which is responsible for hot water, the second - for cold. The advantages of twin-valve mixers are simplicity, reliability and accuracy of temperature setting. On the other hand, they are less easy to adjust than single-piece.

— Single lever (joystick). One lever capable of moving in two planes is responsible for all adjustments in such mixers. When moving in one plane (usually right-left) the temperature is adjusted in the other (up-down or from itself - on itself) - pressure. In addition, such a mixer allows you to «remember» a certain variant of temperature - it is enough to close the water without moving the lever in another plane. But tuning accuracy in such models may be lower than in two-valve.

— Thermostatic. Mixers equipped with a thermostat - a mechanism for maintaining a constant temperature of water at the outlet. This is the most advanced and convenient option, but expensive. It is enough for the user to choose the desired temperature (in degrees) and pressure, and the thermostat will automatically adjust the proportion of hot and cold water. There are models both classic with swivel regulators and thermostatic with button (read more about the button below).

— Buttoning on. Type of mixers con...trolled by pressing a button. This way a certain amount of water is supplied, which helps to save money.

— Single-valve. A variety found in hygiene kits (cf. «Type»). In fact, such a device is not a mixer, but simply a tap designed only to open and close the water. The idea behind this design is that only cold water is often used for hygienic showers, for which one valve is sufficient.

— Cascade. In such vents, water is fed through an outlet in the form of a thin horizontal slit, or a wide trench (depending on the model). Due to this, the output achieves a large width of the jet at a low thickness, which provides a good throughput, as well as the original look, imitating the waterfall (hence the name). On the other hand, this form is less universal than the classical one, and it is much more expensive, and therefore is used quite rarely.

— Classic. Models in which the spout is made in the form of a tube. Such flows may have different shapes in length (straight, curved, with an angle) and cross-section (round, triangular, square, etc.), but they are all tubes.

In most cases, there is simply no drain for shower systems.