Comparison Yamaha PSR-EW410 vs Roland BK-3

The greater the number of keys — the wider the range of the instrument, the lower and higher notes you can take on it right during the game, without resorting to tricks like octave shift (see below). By comparison, a full size piano keyboard has 88 keys. However, in synthesizers, such an amount is rare, because. the instrument would have turned out to be too bulky and expensive, and not every musician, even a professional one, needs such an extensive range. Thus, 88-key keyboards are used primarily in high-end workstations (see "Type"). For ordinary synthesizers, the standard is 49, 61 or 76 keys ( there are also options for 73 keys) — this is usually quite enough (while the "golden mean" option is considered to be 61 keys). And small children's models can have 32 keys.

— Unweighted. Keys with a very low pressing force, literally "failing" under the fingers. This option is well suited for inexpensive synthesizers with passive mechanics (see above), but is rarely used in active models — a small resistance force makes it difficult to choose the optimal pressing force.

— Semi- weighted. Medium-strength keys, not up to the hardness of a full-fledged piano, but showing noticeably more resistance than unweighted ones. This variant is most popular among instruments with active mechanics (see above) — the force on the keys provides adequate feedback and at the same time playing such an instrument does not cause any special difficulties even for those who previously dealt only with unweighted keyboards.

— Weighted. Keys with high actuation force, comparable to that of a classical piano. Used only in professional hammer action instruments (see above) — high rigidity is a must for such mechanics (more precisely, for the response that it must provide).

The polyphony supported by a synthesizer, in other words, is the number of “voices” (tone generators) that can simultaneously sound on it.

This parameter is often described as the number of notes that can be played simultaneously on the keyboard. However, this is not entirely true due to the fact that in many timbres one note can activate several tone generators. As a result, for example, to play a chord of 3 notes in a timbre with 4 tone generators per note, polyphony of at least 3 * 4=12 voices is required. In addition, Auto Accompaniment and Preset Songs (see related sections) also use tone generators, requiring even more voices to work effectively with these features.

The minimum value for a more or less functional modern synthesizer is polyphony for 32 voices — and even then such an instrument can be used mainly for initial training and simple melodies. For a more solid application, it is desirable to have at least 50 – 60 voices, and in professional models (in particular, workstations where you have to deal with several audio tracks at once), there are models with polyphony for 150 tone generators or more.

In general, a more advanced synthesizer is likely to have more extensive polyphony, however, it is only possible to evaluate the class of an instrument by this parameter very approximately — instruments with the same number of voices can differ greatly in level. The only exception to this rule are children's synthesizers (see "T...ype"), which support up to 20 voices.

The number of built-in sounds provided in the synthesizer.

The number of timbres is often described as the number of instruments that a given model can imitate. However, this is not entirely true — rather, this parameter can be called "the number of instruments and sound effects." For example, the same instrument — an electric guitar — with different "gadgets" (distortion, overdrive) will sound differently, and in the synthesizer each such gadget will be considered a separate timbre. The “drums” timbre usually combines different types of drums and other percussion instruments — in other words, it allows you to portray both the “bass drum” and the cymbals without switching settings, just by pressing the desired keys. And some timbres may not have analogues among real instruments at all.

The more built-in timbres, the more extensive the possibilities of the synthesizer, the more diverse the sounds that can be extracted from it. At the same time, in high-end models like workstations (see "Type"), this number can reach 1000 or even more.

The number of auto accompaniment styles (see above) originally provided in the synthesizer, in other words, the number of accompaniment options available to the user.

The more extensive this set, the higher the probability of finding among these melodies suitable options for a particular case. At the same time, the abundance of styles in itself is not yet a 100% guarantee that among them there will be a suitable one, especially since different synthesizer models can differ markedly in a specific set of melodies. So the list does not hurt to clarify before buying. Also note that the situation can be corrected by user styles (see below) — many synthesizers with auto accompaniment support them.

The range in which you can change the tempo of the programme played by the synthesizer — auto accompaniment, lesson tune (see above), metronome (see below), recorded sample, etc.

Pace is measured in beats per minute. Changing it allows you to adjust the speed of the synthesizer to the specifics of the situation — for example, slightly slow down the tutorial if it is too hard to master at the initial pace. The wider the range of tempo adjustment, the more options the musician has to choose from, especially in the area of very slow and very fast tempos.

Note that the traditional range of musical tempos covers values from 40 beats / min (“grave”, “very slowly”) to 208 beats / min (“prestissimo”, “very fast”), however, in synthesizers it can be more extensive — for example, 30 – 255 bpm.

The presence of built-in compositions in the design of the synthesizer.

This function is similar to the auto accompaniment described above — in the sense that it involves playing songs on the synthesizer itself. However, unlike Auto Accompaniment, Preset Songs play strictly by note and cannot be controlled using chords on the left half of the keyboard. In other words, with auto accompaniment, the musician has a lot of freedom, and you have to play along with melodies in strict accordance with it.

Built-in compositions can be used for a variety of purposes. One of the options is training: the musician listens to a reference recording and then tries to reproduce it, either plays along with the melodies according to the given notes, or improvises to it. In addition, in some cases (for example, at mass events), the ability to turn on the synthesizer as a player can be very useful. Also, built-in songs are used to test and demonstrate the general capabilities of the instrument: it is assumed that the recorded song can be repeated using the synthesizer itself.

— mini-Jack (3.5 mm). Line-level analogue audio input using a 3.5mm mini-jack. The line input itself is used to connect an external analogue audio signal to the synthesizer — for example, from a computer sound card. The use of such a connection can be different: playing accompaniment through the built-in speakers of the instrument, switching the signal to an external amplifier with “mixing” the sound of the synthesizer itself into it, etc. Specifically, the 3.5 mm mini-Jack connector is small in size, it is popular mainly in portable equipment and inexpensive stationary devices — “serious” audio equipment is usually equipped with more reliable connectors, like Jack (see below). As a result, an input with this type of connector is typical mainly for entry-level synthesizers.

— Jack (6.35 mm). Line-level analogue audio input using a 6.35 mm jack. By purpose, such an input is completely similar to the input with a 3.5 mm mini-Jack jack described above, however, the Jack connector is larger, provides a more reliable and high-quality connection and is considered more suitable for stationary audio equipment, especially high-end ones. Therefore, in synthesizers of an average and advanced level, usually, this type of line input is used. At the same time, we note that a 3.5 mm plug can be connected to a 6.35 mm jack using a simple adapter.

— Digital. Input for connecting to a digital audio signal synthesizer. It is similar in purpose to the linear interfaces descri...bed above, but differs both in signal format and in connector type — most often it is a coaxial S / P-DIF interface using an RCA connector, although other options are possible. Digital outputs are quite popular both in professional audio equipment and in home appliances like PCs and even TVs, so such an input may be useful.

— MIDI. MIDI is originally a digital signal format used in electronic musical instruments. Each key pressed on the synthesizer gives just such a signal: it contains data on the duration, force and speed of pressing, as well as the note number, and based on the control signal (MIDI event), the “hardware” of the synthesizer generates the desired sound. Accordingly, the MIDI input allows the synthesizer to receive MIDI events from external electronic musical devices — other synthesizers, MIDI controllers, etc. This connection can be useful, for example, if the external instrument does not have the desired timbre; in addition, many synthesizers are capable of recording received MIDI signals. In some cases, the possibility of switching such a signal via MIDI thru may also be useful (see "Outputs").

— USB (type A). A classic USB connector that allows you to connect various external devices to the synthesizer — primarily flash drives and other drives, other peripherals are rarely supported. The features available when working with a flash drive depend on the general functionality of the synthesizer and may be different in different models. So, some instruments are capable of playing music from such a carrier, which plays the role of accompaniment for the main part — this can be more convenient than using auto accompaniment. Others are able to record music on a flash drive. It may also include updates to the Voice Set and/or Auto Accompaniment Styles (see above), firmware updates, etc.

— Card Reader. A slot for reading memory cards, most often SD: this is a universal format widely used in many types of modern electronics. Like a USB flash drive (see above), the card reader can be used for different purposes — most often for playing musical accompaniment or recording music, but there are other options (loading additional timbres, updating firmware, etc.).

— Digital. Digital audio output, usually via coaxial S/P-DIF interface. It is similar in purpose to the line outputs (see below), differs only in the type of connector and the digital signal format. It can be useful, in particular, for connecting the synthesizer to a device that does not have line inputs, or if these inputs are occupied.

— USB B. A connector designed to connect the synthesizer to a computer or laptop as a peripheral device. Such a connection provides very extensive possibilities: it allows you to load new timbres, auto accompaniment styles and melodies into the synthesizer, edit existing ones; record the played music on the computer (or rewrite the music recorded in the memory of the synthesizer itself); use the instrument as an external MIDI keyboard; change various fine settings and troubleshoot, etc. The specific functionality available with a USB connection depends on the synthesizer model.

— MIDI. Output for transmitting MIDI signals (MIDI events) to external devices. MIDI is a specialized type of digital control signal used in musical instruments. Such a signal is generated when a key is pressed, it contains data about the pressing itself (duration, strength and speed), as well as the note number; Based on this signal, as well as the set settings, the electronic “hardware” of the synthesizer generates a sound of the required duration, timbre and other characteristics. Accordingly, the MIDI output allows you to transmit MIDI events to...an external device — a sequencer, sampler, another synthesizer, a computer (although it is more convenient to connect the instrument to a computer via USB), etc. This interface can be used for various purposes — MIDI recording, playing music through an additional synthesizer if the main model does not have the desired tone, etc.

— MIDI thru. An output designed to transmit to another device MIDI events received by the synthesizer via a MIDI input (see "Inputs"). In this case, the stream of MIDI commands is transmitted unchanged, pressing the keyboard of the synthesizer does not affect it. This function can be useful in some situations where the instrument is connected to several external devices at the same time. For example, if you need to control two others at once from one synthesizer, you can compose such a system as follows: the MIDI output of the control synthesizer is connected to the MIDI input of the first controlled one, and the MIDI thru output of the first one is connected to the MIDI input of the second one. Thus, the control signal goes to the first controlled synthesizer, and, through it, to the second one, while it would be difficult to connect both instruments directly.

— Headphones. Dedicated headphone output. It usually uses a mini-Jack 3.5 mm or Jack 6.35 mm connector — the vast majority of modern headphones are equipped with the first, the second is less common in the “ears”, but more reliable, and is also compatible with 3.5 mm through a simple adapter. Using "ears" when playing the synthesizer is convenient because only the musician hears the music played — this can be useful in situations where you need to practice, but it is undesirable to make noise (for example, at late hours of the day). In addition, some instruments do not have built-in acoustics, and you can listen to them normally only through additional equipment — the role of which can be played just by headphones.