United Kingdom
Catalog   /   Sound & Hi-Fi   /   Musical Instruments   /   Pianos & Keyboards   /   MIDI Keyboards

Comparison Arturia KeyLab Essential 61 vs Behringer U-Control UMX610

Add to comparison
Arturia KeyLab Essential 61
Behringer U-Control UMX610
Arturia KeyLab Essential 61Behringer U-Control UMX610
Compare prices 3Outdated Product
TOP sellers
Keys61 шт61 шт
Key sizefull sizefull size
Mechanicsactive (dynamic)active (dynamic)
Rigiditysemi-weightedsemi-weighted
Aftertouch
Control
Pitch controller
Modulation controller
Transposition
Octave shift
Keyboard split
Transport control
Pads8
Faders91
Regulators (encoders)9
/appointed/
Connections
MIDI out
USB to host (type B)
Connectable pedals1 шт1 шт
General
Programming function
Displaymonochrome
Dimensions (WxHxD)882x76x248 mm990x97x215 mm
Weight3.3 kg4.7 kg
Color
Added to E-Catalogfebruary 2018february 2018

Aftertouch

The presence of the aftertouch function in the keyboard (aftertouch). The essence of this function is to track the pressure force on the key after it is pressed. In fact, this means that in models with aftertouch, you can control the sound not only due to the force and speed of pressing the key, but also due to the change in pressure on it after pressing; this gives additional features and allows you to use various specific tricks of the game. The specific ways of changing the sound “tied” to aftertouch can be different, depending on the synthesis settings set: for example, when recording a guitar part, you can tie a small change in tone to this function and imitate string bending, when recording a saxophone, change the volume of notes, and etc.

Relatively inexpensive models use a common sensor to monitor aftertouch, which monitors the average force of pressure on all keys pressed; in more advanced ones, separate sensors are installed for each key.

Transposition

The presence of the transposition function in the keyboard — switching the sound to a different key. When transposing, the pitch of all keys is simultaneously raised or lowered by a certain number of semitones. This function is useful in all cases when a melody learned in one key needs to be played in a different key — for example, if the original melody is too high or too low for the vocalist, if the external accompaniment differs in key, if you need to switch between keys during the song, and etc. In such situations, by transposing the sound, you can play a melody in a new key using the same familiar keys without relearning it.

Keyboard split

The presence in the device of the function of splitting the keyboard.

This function, as the name suggests, allows you to divide the keyboard into two parts, each of which will have a different timbre. Thus, on one device, you can play the part of two instruments at once (for example, add the sound of a string orchestra to the violin) or accompany the part of the instrument with various effects (siren, klaxon, thunder, etc.). Some models allow you to select the position of the border between the keyboard zones.

Transport control

The presence in the keyboard of the transport control function.

In this case, we are usually talking about support for the MIDI Machine Control standard, designed to control external recording and playback equipment. Such support actually turns the keyboard into an external remote control, allowing you to give commands from it to "Play", "Stop", "Pause", "Rewind" (forward and backward) and "Record". To do this, the design provides a separate panel with a set of appropriate buttons.

Pads

The number of pads provided in the design of the keyboard.

Pads are auxiliary controls in the form of characteristic pads, usually square. The pads respond to touch, each of them can be tied to a specific sound or even a sequence of sounds. One of the most popular ways to use pads is to play drums or other rhythmic instruments.

Faders

The number of faders provided in the design of the keyboard.

A fader is a slider control. The simplest kind of such controls is the volume setting; if there is one fader in the design, most likely it is responsible for the volume. If there are more controls, other functions can be tied to them, respectively — in particular, changing the settings in the recording programme on the computer to which the keyboard is connected.

Regulators (encoders)

The number of encoder controlsprovided in the design of the keyboard.

Such a knob looks like a rotary knob, with which you can control various functions of the device to which the keyboard is connected — for example, turn the virtual knobs in the programme for recording and sound processing. At the same time, we note that a full-fledged encoder is capable of rotating 360 ° and turning to any angle in any direction, however, keyboards can also contain knobs with a limited rotation sector — they can also be called encoders. None of these options has a clear advantage: in some cases, an unlimited turning sector is more convenient, in others, a limited one.

Display

The type of display that the keyboard is equipped with.

Most modern MIDI keyboards have relatively simple monochrome (single colour) displays. Such screens are inexpensive, and their capabilities are sufficient for most cases. However, there are also models with colour screens — usually, such equipment is a sign of an advanced keyboard with an abundance of additional functions; for simpler devices, a colour display is overkill.
Arturia KeyLab Essential 61 often compared