Comparison Clever Panda i5 vs iClebo Omega

Type(s) of cleaning for which the vacuum cleaner is intended.

Almost all modern units have the function of dry cleaning. In turn, wet cleaning is usually provided as an addition to the dry mode and is rarely used as the only cleaning mode. Here is a more detailed description of these options:

— Dry. Traditional cleaning without the use of water: the vacuum cleaner draws in air, collects debris in the dust container and purifies the air through a filter system. It is considered somewhat less effective than wet, but it has practically no restrictions on its use: almost any material can be cleaned in this way. In addition, such cleaning is much easier for the user (no need to fill or even drain water). And the units themselves, which have only a dry mode, are simpler and more inexpensive than similar models with a wet cleaning function. In addition, for some types of vacuum cleaners, this is the only available option. A typical example is handheld models of both household and industrial specialization (see "Product type").
We note that the possibility of water suction (see below) can be provided even in vacuum cleaners with a purely dry type of cleaning (most often in industrial and household models — see "Product type").

— Wet and dry. The ability to carry out not only the dry cleaning described above but also wet cleaning. It is in this fo...rmat that all washing vacuum cleaners work (see below). However, we emphasize that not every unit with the wet cleaning function is a washing vacuum, and even the water suction function (also see below) is not always available in such models. The fact is that many vacuum cleaners with this feature use the simplest possible operation mode: water from a special container is supplied to a special nozzle and moistens the floor after cleaning. However, even such a treatment method significantly increases efficiency compared to conventional dry cleaning. An additional nozzle collects dirt that the vacuum cleaner could not draw in, and moistening the floor refreshes the room and prevents dust from rising into the air that could remain after cleaning. For washing vacuum cleaners, in turn, other advantages are also common. The main disadvantages of all models with two types of cleaning are the complexity of the design, greater weight and higher cost than similar units with only a dry format.

— Wet. This option means that the vacuum cleaner is designed for wet cleaning only and does not require a dry operation. See above for details on these modes. Here we note that it is a very rare option used in single models of conventional and upright vacuum cleaners (see "Product type").

The suction power provided by the vacuum cleaner. For models with power adjustment (see below), in this case, the maximum value is taken into account. Note that "suction power" is sometimes erroneously also called the suction force, indicated in pascals; see below for more details.

Suction power is a key indicator that determines the capabilities of the unit: the higher it is, the more efficiently the vacuum cleaner can draw in various contaminants, and the better it handles with carpets, fabrics and other materials into which dust can penetrate deeply. On the other hand, high power inevitably affects the weight, power consumption, dimensions and price of the device. Therefore, it does not always make sense to chase the maximum values — you need to take into account the real working conditions and the general purpose of the vacuum cleaner.

The specific numbers found in this paragraph largely depend on the type of device. For example, in handheld household models, suction power does not exceed 100 W, and for conventional household units, an indicator of 100 – 150 W is still considered very limited. At the same time, we note that the minimum required for a full-fledged dry cleaning of smooth floors is considered to be 300 – 350 W, for carpet and other short pile coatings — 350 – 400 W, and for long pile materials and upholstered furniture higher rates are desirable. Vacuum cleaners with lower suction power values are intended not so much for periodic cleaning, but for constant (ideally daily) maintenance of cleanliness in an already tidy room.

As for the relationship between suction power and suction force, it is as follows: power is the suction force (thrust) multiplied by the airflow (performance). Without going into too much detail, we can say that the efficiency of the vacuum cleaner is determined by both of these indicators. And it is worth evaluating this efficiency by suction power (regardless of the specific relationship between traction and performance).

The nominal volume of the dust collector installed in the vacuum cleaner.

This indicator largely depends on the type of unit (see above). For example, in most handheld household models, the capacity does not exceed 0.5 L. The volume of the container in upright vacuum cleaners and robots can be somewhat larger — among the first variety there are quite a few models for 1 – 2 liters or even more, and among the second — by 0.6 – 1 liter and a little more. For conventional vacuum cleaners, the minimum figure is actually about 0.8 – 1 L; dust collectors for 1 – 2 L and 2 – 4 L are very popular in such devices; the maximum capacity is actually 4 – 6 liters — units of a similar layout, but with a larger capacity, are usually referred to as household ones. In turn, relatively small containers are occasionally found among workshop models. However, in vacuum cleaners of this type, the capacity is generally quite large — it can reach 26 – 50 liters or even more ; the same applies to industrial (construction) units.

In general, a larger dust container allows you to work longer without interruptions. On the other hand, a capacious container itself takes up more space and, accordingly, affects the size, weight and price. So when choosing th...is parameter, it is worth considering the actual features of the use of a vacuum cleaner. Here we can give such an example: for a full-scale cleaning of an average city apartment, a capacity of about 1 – 1.5 litres is required. Thus, say, a 4-litre bag allows you to carry out two such cleanings with sufficient efficiency without unloading the vacuum cleaner. There are more detailed recommendations regarding the optimal volume of the dust collector, including specific cleaning options. These recommendations can be found in special sources.

A capacity of a tank for water or detergent a vacuum cleaner with a wet cleaning function is equipped with. (see "Cleaning type").

Large capacity allows you to work longer without refilling the tank. On the other hand, an increase in capacity has a corresponding effect on the size, weight and cost of the unit. Thus, manufacturers choose this parameter taking into account the general specialization and the “weight category” of a particular model. So, in robots (see "Type"), the volume of the water tank is, by definition, small. Even in the heaviest models, it does not exceed 650 mL. But other types of vacuum cleaners can differ markedly in this parameter.

In general, for non-robot units, a capacity of 1 liter or less is considered very limited, 1 – 2 liters is small, 2 – 3 liters is average, more than 3 liters is above average. However, it much depends on the type. For example, in conventional vacuum cleaners, the capacity does not exceed 2.5 liters, and "for workshop" models this is very little — in most cases, they have a tank capacity of 3 liters or more.

Additional modes of operation provided by the robot cleaner (see "Product type").

First of all, let us clarify that the standard modes, in this case, include two formats of cleaning at standard power — continuous, in which the vacuum cleaner carefully cleans the entire room (or its specified area), and chaotic, in which it moves randomly within the working area. Other ways of working are considered additional; their list is given in this paragraph. Among the most common additional modes are spot cleaning (Spot), perimeter cleaning (Edge), and turbo mode. In addition, a fairly popular function is the Zigzag. Here is a detailed description of the different options:

— Spot cleaning (Spot). A mode that allows you to use the vacuum cleaner for targeted cleaning of a relatively small area of the room — for example, when spilling a small amount of debris. Most often, this programme works as follows: the robot moves to the centre of a user-defined zone, and then starts moving from this point in an expanding spiral and stops at a given distance from the starting position.

— Perimeter cleaning (Edge). A mode that allows you to start the vacuum cleaner around the perimeter of a given zone. By the name, it is mainly used for cleaning along the walls of the room: a lot of dirt accumulates in these places, which are difficul...t to remove when using standard cleaning modes.

— Turbo mode. Power mode for more suction force. Usually, the movement of the vacuum cleaner, in this case, can be carried out according to any programme available in the settings — both standard (combing, random movement) and additional (Spot, Edge, Zigzag). Anyway, the turbo mode is useful primarily for cleaning carpets and other floor coverings with pile, for which the standard power of the vacuum cleaner is not enough. However, working at increased traction increases the load on the unit and increases its wear. Therefore, most models have restrictions on the maximum time of continuous operation in turbo mode and sometimes on the minimum duration of breaks between switching on this mode.

— Zigzag. Zigzag movement is a kind of transitional variant between the orderly combing of the room and the random choice of direction. Zigzag allows you to achieve greater efficiency than chaotic movements. In addition, with such a movement, it is easier to compensate for the presence of various obstacles and ensure thorough cleaning of the entire given area.

A method for limiting the processed space provided in a robot vacuum cleaner.

Another name for this feature is "virtual wall". Its general meaning is quite obvious: a “wall” (or several walls) allows you to limit the movement of the robot on the surface to be cleaned. It can be useful if cleaning needs to be done in a room without a door. Or if part of the floor is occupied by small items that do not need to be cleaned (for example, pieces of a puzzle being assembled). But the specific possibilities of such a restriction are directly related to how it is implemented. Note that the function is found mainly in middle-class robot vacuum cleaners and top models. Budget robotic "cleaners" often do not have the function of limiting the zones of the processed space - they do not have one.

Here are the main options found in modern robots:

— Laser sensor. A fairly popular option due to its simplicity, low cost, as well as simplicity and ease of use in fact. Usually, when installing the laser limiter, it is enough to put it on the floor and point it in the right direction. On the other hand, such devices are not well suited for creating complex borders. The classic format of the laser limiter is linear: a doorway or room is blocked by a direct beam, which is perceived by the robot as the boundary of the treated area. In addition, some models may also provide a circular mode, when the sensor forms a "forbidden zone" in...the form of a circle or sector of a certain diameter. This format of work allows to fence off the corners of rooms and small areas near the walls (a typical example is the location of a dog or cat bowl in the kitchen). If you need to create a border of a different, more specific shape, this will require several sensors at best (even though one limiter is usually supplied in the kit if supplied at all); and in the worst case, it will be completely impossible. It is also worth considering that the range of the laser in linear mode is usually limited to 3 – 4 metres; this is most often sufficient for residential premises and small offices. However, it may not be enough for a large space. And the emitters are usually powered by batteries or accumulators, the charge of which is limited.

— Magnetic tape. Limiter in the form of a tape made of magnetic material laid on the floor. Such a tape is spotted by a special sensor and is perceived by the robot as a border that cannot be crossed. For secure fixation, it is usually made self-adhesive, and the intensity of the magnetic field in most cases ensures effective operation through carpets and other similar coverings. One of the key advantages of such restraints is that almost any shape of the restricted zone can be formed from the sections of tape: the length of individual sections can be chosen at your discretion, and the maximum total length is limited only by the stock of tape at hand. In addition, this type of limiter does not require power. The disadvantages of this option include the complexity of laying in some conditions (for example, under a continuous carpet covering). In addition, at best, a very small amount of tape is included in the package; and many vacuum cleaners are not equipped with it at all, so you need to buy a magnetic tape additionally.

— Via the application. The most advanced way to limit cleaning: the boundaries of the working area are set on a smartphone or other gadget through an application that is also used for general control of the robot. Almost all models with this function also have the function of building a map of the premises (see below) — the finished map is displayed in the application, and on it the user can set the boundaries of the working area at will. The simplest version of such borders is separate straight lines. However, control applications often provide more extensive features: broken lines and polygons from individual segments, standard shapes (circle, oval, rectangle) and even the ability to draw a border by hand. Anyway, this method of restriction is extremely convenient and functional. However, robot vacuum cleaners with this capability are expensive, mainly due to the presence of a complex mapping system.

Additional functions provided in the design of the robot vacuum cleaner (see "Type").

Most often in modern robots you can find such special functions: scheduled cleaning, fall protection, obstacle sensor, carpet detection, object recognition, water supply adjustment, control via the Internet, remote control and video surveillance camera. Here is a more detailed description of each of them:

- Scheduled cleaning. The ability to set a schedule according to which the vacuum cleaner will clean automatically, without additional commands from the customer. At the same time, the specific features of such programming may be different, they should be specified separately. So, in the simplest models, the schedule is limited to individual hours within a day - for example, from 16 to 17; at the set hours, the vacuum cleaner is switched on every day. More advanced devices may provide a schedule for the days of the week or even for the dates of the month or year. In any case, this function greatly simplifies the use: it is enough to set the schedule once - and you can not worry about cleaning for at least a few days; especially since most models with this capability also have...the function of docking(see “Robot Configuration - Charging Station”), and the customer only needs to periodically empty the dust container (which is even more simplified if there is a docking station with a bag - see . below).

- Fall protection. Special protection that prevents the vacuum cleaner from falling off steps, high thresholds, etc. In most cases, the basis of such a system is one or more sensors located on the underside of the case. When the vacuum cleaner travels to the edge of the surface being treated, the sensor reacts to this edge - as a result, the device stops and changes direction in order to avoid falling.

- Obstacle sensor. Sensor (or sensor system) for detecting obstacles in the path of the vacuum cleaner. The specific type of such sensors can be different: ultrasonic, infrared, laser, contact, etc. However, in any case, this function allows the device to move in space, avoiding collisions and determining the best detour path. Note that models without such a sensor, for the most part, are also able to bypass obstacles - however, for this, the robot must not only stumble upon a foreign object, but try to pass through it. And only in case of failure, the trajectory changes - moreover, randomly, far from always in the optimal (or at least suitable) direction.

- Carpet detection. The automatic carpet detection feature of robotic vacuum cleaners improves dry efficiency on low to medium pile carpets. When driving on carpet, the vacuum cleaner automatically increases the motor speed and suction power in order to achieve the proper cleaning result. As a rule, robot vacuum cleaners with support for this mode are equipped with a turbo brush and a capacious dust collector. It should be borne in mind that when cleaning carpets at high power, the battery life of the vacuum cleaner is reduced.

- Object recognition. The function of recognizing various objects on the floor that may interfere with the cleaning process. It is implemented through the presence of a front camera to adjust the optimal route for the vacuum cleaner along the perimeter of the serviced area. The camera in the design of the robotic cleaner reads the outlines of objects and allows you to bypass such obstacles. As a result, slippers, socks thrown under the bed, children's's toys and wires will no longer interfere with the movements of the vacuum cleaner. The function is of particular benefit in the presence of pets at home that are not accustomed to the tray - the robot will calmly has their waste products and keep the nervous system of pet owners healthy.

— Adjustment of water supply. Dosing system for the degree of wetting of the washing cloth in automatic mode. The ability to select the intensity of the water supply allows you to adjust the operation of the robotic vacuum cleaner for different types of floor coverings. For example, for parquet and laminate, the customer can set a low water flow rate, and for less whimsical tiled flooring, a high water flow rate. Also, the vacuum cleaner can turn off the water supply to avoid leaks, for example, when charging. In advanced models of robotic vacuum cleaners, the function of choosing an individual degree of wetting of the napkin for each of the rooms of the dwelling is often incorporated.

— Docking station with a bag. Docking station with its own trash bag. Upon arrival at such a stand, the robot can not only recharge the battery, but also carry out self-cleaning - unload the collected garbage into an external container; The capacity of the dock, as a rule, is enough for several unloadings. The convenience of this function is obvious: it allows the device to work longer without customer intervention, eliminates the need to manually clean the vacuum cleaner when the dust container is full (besides, unloading garbage from the dock is usually easier than such cleaning). True, and such opportunities are quite expensive.

- Management from the Internet. The ability to control the vacuum cleaner via the Internet - most often through a special application on a smartphone or other gadget (theoretically, such control is also possible through a web page that opens in any browser, but in practice this method is almost never used). The robot itself is connected to the network via Wi-Fi. The main advantage of this function is obvious - it allows you to give commands to the device from anywhere in the world where there is Internet access. In this way, for example, you can start a cleaning programme the day before you return from vacation in order to return to a freshly cleaned apartment. And the vacuum cleaner, in turn, can send various notifications to the customer - about the state of the battery, the progress of cleaning, the fullness of the dust container, etc.

- Remote control. A classic remote control that allows you to give commands to the device from a distance. As a rule, such a remote control covers all the main functions of the vacuum cleaner, and in many models it also allows you to directly control the movement. In any case, without remote access, it would be very difficult to control a moving vacuum cleaner - you would either have to wait until it finishes working, or catch the unit on the go. In light of this, this feature is very popular; however, on sale you can find a lot of robots without a remote control. As a rule, these are either the simplest budget devices with a random movement mode and without any additional functions, or advanced models where a smartphone / tablet with an application is used for control.
We also note that the remote controls in robotic vacuum cleaners usually work via an infrared channel - similar to remote controls for TVs, air conditioners, etc. Thus, to receive a command, the vacuum cleaner must be in the line of sight. However, in most cases this can not be called a serious inconvenience.

- Videcam. Own surveillance camera built right into the vacuum cleaner. This feature is only found on web-based models (see above); it allows you to use the robot as a remote video surveillance system and control the situation in the room, being outside and watching the picture from the camera on the smartphone screen. Also, the built-in camera can be used in the mapping system (see "Building a room map") - however, we note that not every vacuum cleaner with a built-in mapping camera has a video surveillance function.

Traditionally, robot vacuum cleaners are made with a round body shape. Less common are instances of robot cleaners with a square body and D-shaped .

- Round. The most versatile version of the performance of robot vacuum cleaners. Models with a round body shape easily go around all sorts of obstacles and captivate with excellent manoeuvrability. However, due to their design, round robotic vacuum cleaners are not the best at cleaning corners.

- Square. Square vacuum cleaners easily drive right up to the corner and effectively sweep debris from hard-to-reach places. In open space, these robots are not inferior in terms of cleaning quality to round counterparts.

- D-shaped. A transitional option between round and square robot vacuum cleaners aimed at efficient cleaning in all corners of the serviced premises. Also included in this category are robots with triangular body shape.

Cleaning area for which the robot vacuum cleaner is designed.

It is the maximum size of the room that the device can effectively process without the need to empty the dust container or charge the battery. It is worth choosing according to this parameter with a certain margin — this will give an additional guarantee in case of various emergencies. On the other hand, you should not take too much stock: after all, a large cleaning area requires more capacious batteries and capacious dust collectors, which significantly affects the dimensions, weight, and most importantly, the price of the vacuum cleaner.

As for specific figures, the most modest models nowadays are designed for 45 – 60 m2 — this corresponds to an average apartment with 1 – 2 rooms. And in the most advanced and heavy devices of this type, the cleaning area can be 300 m2 or even more.