Comparison AgeStar 3UBT8 vs AgeStar 3UB2P

General type of drive pocket. The main division of such devices nowadays is external and internal, however, there are also more specific varieties — docking stations and covers. Here is a more detailed description of each option:

— External. Models used outside of PC / laptop cases and designed to turn internal drives into external ones. Pockets of this type perform two main functions. Firstly, they allow you to connect an HDD and SSD with an "internal" interface, such as SATA, to an external connector, most often USB. Secondly, the pocket provides convenience in storage and transportation and additionally protects the contents from dust, moisture and other adverse factors. Such a device can be useful, for example, on a business trip, where you need to carry a lot of work materials: you can remove the entire hard drive from the computer and keep it with you, using it as an external drive. Another example of application is a healthy HDD or SSD left over from an old system and not needed inside a new computer: such a drive with an external pocket can be a good (and definitely cheaper) alternative to a new purely external device.
Note that although most pockets of this type are made portable, there are also stationary models; see "Purpose" for details.

— Internal. Pockets designed to fit inside a PC, laptop or serve...r case. They can perform different functions, depending on the specialization (for more details, see "Purpose"). So, in laptops, pockets are used to install internal drives in a "non-native" seat. In PCs and servers, the specifics of such devices are somewhat different — they are often used to provide the ability to quickly move drives from one case to another. However, there are also solutions that play the role of adapters — in particular, for installing 2.5" drives in 3.5" slots and for connecting M.2 format SSD modules to PCI-E slots for expansion cards. Note that the interface of the drive in the internal models of such models most often corresponds to the connection interface (see below) — in other words, the same interface is used to connect the drive to the pocket and to connect the pocket with the drive installed to the computer. But, again, there may be exceptions — like the mentioned M.2-PCIe adapters.

— Dock station. A special kind of pockets for external purposes, designed mainly for stationary use. The main difference between “docks” and ordinary external pockets is that in this case, instead of full-fledged drive bays, only sockets for connection are provided — in the form of recesses with connectors. Thus, the drives are installed on the docking station as if on a stand, and with this installation they remain almost completely open. The main advantage of this design is the maximum simplicity and speed of replacement; so it makes sense to use docks in cases where you often have to change the installed HDD / SSD. One example of such an application is professional diagnostics of internal drives: instead of putting the next “patient” right into the case or into a traditional external pocket, it’s easier to use the dock. Also note that there are often several slots for drives in docking stations at once, and individual slots can be reconfigured for different form factors (for more details, see "Drive Slots").

— Case. Usual covers for carrying drives; do not perform any other function than storing the contents and protecting them from dust, moisture and other adverse factors. Usually, covers resist dirt well, but impact resistance can be different, and most often it is low — if this point is important to you, it's ok to clarify it separately.

The general purpose of the pocket.

Note that for different types of such accessories (see above), a different division is used according to purpose. So, external pockets are divided into portable and stationary, and internal pockets are divided into laptop models, PC chassis and server solutions. For docking stations and cases, this parameter is not specified at all: the former initially assume stationary use, the latter, again, are portable by definition.

Here is a more detailed description of the options relevant for external pockets:

— Portable. Models designed for frequent moving from place to place and even for use on the go (for example, connecting to a laptop on the road). Most modern external pockets fall into this category — after all, initially external drives (which such pockets are an alternative to) are also made predominantly portable. The specific features of these accessories may vary, but they are all quite compact and designed for only one internal drive, and they receive energy from the same USB port they are connected to (see "Power").

— Stationary. External pockets designed to stay in one place all the time and do not involve frequent movement and use on the road. Such models are much less common than portable ones; most of them are rather l...arge designs, designed to install 2 or more drives, and are often a kind of "NAS-server without networking". However, there are also models for 1 slot — they usually differ from portable counterparts in the presence of a stand that allows you to put the pocket vertically (so that it takes up less space on the table), and is powered by a power supply unit.

In turn, internal pockets for different purposes have the following specifics:

— For laptops. This type is usually designed to install 2.5" or M.2 form factor drives in the optical drive bay (CD / DVD) — due to the compact size of laptops, this is often the only possible way to install an additional drive.

— Chassis. Pockets designed for regular desktop PCs. Note that the term "chassis" traditionally refers to only one special kind of such pockets — the so-called Mobile Rack, colloquially known as "sled". The main function of such accessories is to provide the ability to quickly move drives from one case to another. To do this, the design provides for two parts: a base, which is mounted in a 5.25" slot on the case, and a removable cartridge, into which the drive is installed directly. To prevent theft or unauthorized physical access, the "sled" can be equipped with a lock that blocks the removal of the drive. Our time is used quite rarely, mainly when working with disk arrays, as well as in some other specific cases — for example, so that after the end of the working day you can take a disk with materials with you or hide it in a safe to ensure confidentiality.
Another kind of PC pockets are adapters for installing drives in non-standard seats. The classic case is the use of a 2.5" laptop drive in a 3.5" desktop case, but nowadays there is a more specific option — the use of an SSD M.2 drive as a PCI-E expansion card (for more details, see "Form factor") .

— For the server. Server systems most often have to deal with large volumes of information that require high reliability and/or speed of access. Thus, most pockets of this purpose are designed for several drives (from two to six) — this allows you to provide the necessary volumes and, if necessary, organize a RAID array of one or another level. At the same time, built-in support for RAID (see below) is not found in such devices — it is easier and more reasonable to organize it using the server itself. It is also worth noting that according to the method of installing disks, such pockets usually refer to “sleds” (see “Chassis” above) — this provides additional convenience, allowing, for example, quickly replacing a failed drive in a RAID array. Server pockets can use specialized connection interfaces like SAS, although traditional SATA is still more popular.

The form factor of the drive that the pocket is designed to hold.

Such accessories are made for standard form factors of internal drives: 3.5 ", 2.5"(often — for both at once), as well as M.2 SSD. Here are the features of each of these options:

— HDD 3.5 ". 3.5" is the traditional form factor of internal drives for full-size desktop PCs. Accordingly, internal pockets for this form factor are used exclusively in PCs or servers, they are too bulky for laptops; moreover, most of these pockets are a chassis — "sled" (see "Purpose"). External solutions turn out to be more bulky than models under 2.5", however, due to the absence of strict restrictions on the size, capacious drives for such pockets are much cheaper than miniature analogues of the same capacity. Also note that most 3.5-inch drives are just traditional hard drives (or hybrid SSHD devices), SSD modules in this form factor are practically not produced.

SSD or HDD 2.5". Therefore, the internal pockets of this form factor are intended primarily for laptops; a classic version of such an accessory is an adapter for installing a drive in an optical drive slot. In PC models, this option has not received much distribution — modern desktops usually have not only 3.5-inch, but also 2.5-inch drive bays; and for a number of reasons, it is more convenient to use 3.5" solutions as quick-release "...sleds" (see above). But for servers, internal pockets of this form factor are available — for several slots; they usually also represent a "sled" chassis. What As for external models, 2.5" pockets are noticeably smaller than 3.5" counterparts, however, drives for them are more expensive per gigabyte of capacity (especially with large volumes).

— SSD or HDD 2.5"/3.5". Models designed for two form factors at once. The meaning of this marking depends on the particular type of pocket. So, in external models and docking stations (see "Type"), it usually means the ability to install a drive of any of the two form factors in your pocket, to choose from. Usually, bays or slots in such models are initially designed for 3.5", and special plugs are used to fix 2.5" drives in such slots (note that there may be fewer such plugs in docks than sockets). A similar design is used in internal models for servers, as well as in PC chassis that look like a "sled" (see "Intended use"). However, in PC models there is another option — adapters for accommodating 2.5" HDD / SSD in 3.5" form factor slots ; such accessories are also included in this category.

— SSD M.2. Form factor designed specifically for miniature internal components, including solid state drives. Dimensions of M.2 peripherals are from 12 to 30 mm wide and from 16 to 110 mm in length, such components are connected through the connector of the same name. External pockets of this form factor are compact in size. In turn, internal models are most often laptop solutions for installing an SSD in an optical drive slot. However, there is also a rather specific option — PC accessories that allow you to connect M.2 drives to a PCI-E slot (like a separate sound card or another expansion card).
Note that the connection via M.2 can be carried out both on the basis of PCI-E and on the basis of SATA; for more details, see "Drive interface", here we note that the current moment and compatibility with a specific drive should be specified separately.

The main material from which the body of the pocket is made.

— Plastic / rubber. This category includes models that use plastic and/or rubber in the construction of cases. The specific ratio and features of the use of these materials are different: the body can be all-plastic, have rubber lining at the ends to increase impact protection, be completely covered with rubber, etc. And in covers (see "Type"), these materials can also be supplemented with others — such as EVA, neoprene or even cloth. Anyway, plastic / rubber cases are found exclusively in external models, including docking stations. Such pockets are somewhat inferior to metal pockets in terms of strength and reliability, but they are cheaper, and in normal everyday use, the mentioned difference is not critical.

— Steel. Cases made of metal are most often made of steel, but there are other options (for example, aluminium alloys). In the inner pockets, only this option is found — this is due to a number of features of such accessories. As for external models in this design, they are much stronger and more reliable than plastic ones, besides, the metal case creates an additional feeling of solidity. The downside of these advantages is the higher price.

The number of separate slots for drives provided in the design of the pocket, in other words, the number of drives for which this model is designed.

In addition to models for one slot, nowadays you can find more capacious solutions — for two drives, or even more. Such "multiplying" is found in three types of devices. The first is large-format pockets for stationary purposes (see above), operating in the format of separate storages for a large amount of data. Such models may support RAID arrays (see above) and other special features. The second type of devices with more than one slot are separate docking stations (see "Type") with similar functionality. The third type is server models (see "Purpose") with an internal installation; they again allow the organization of arrays, but by means of the server itself.

Note that external devices with one slot can be powered from the USB port, but several drives in this case inevitably require a separate PSU (see "Power").

The type of power provided in the design of the pocket.

This parameter is relevant only for external models (in internal solutions, power is determined solely by the connection interface). The options could be:

— USB. Powered by the same USB port used for the main connection. The advantage of this option is obvious: it allows you to do without unnecessary wires and use the pocket regardless of the presence of sockets (which is important, for example, when working with a laptop on the road). At the same time, the power of USB power is generally low, and besides, it directly depends on the version of the connector (see "Connection"). So for pockets with several disks, this option is not suitable in principle. In other cases, you should pay attention to compatibility when connecting to a USB connector of an older version than is supported by the pocket. For example, a model with USB 3.2 gen1 can be physically connected to a USB 2.0 port without any problems, but it may not have enough power for normal operation. However, more modern versions (USB 3.2 gen1 and gen2) practically do not have such compatibility problems.

- Power Supply. Powered by a separate PSU, usually plugged into a power outlet. These pockets are bulkier and less mobile than USB-powered models, they can't work without power outlets nearby, and the extra wire is a bit of a hassle. On the other hand, the power supply is capable of delivering mor...e power than USB, and this power is constant and does not depend on the version of the port to which the drive is connected. So many stationary models use just such a power supply; and for external pockets for two or more drives, this is generally the only available option.