United Kingdom
Catalog   /   Home & Renovation   /   Smart Home & Security   /   DVR & NVR Recorders

Comparison Dahua NVR2108-4KS2 vs Dahua NVR4208-4KS2

Add to comparison
Dahua NVR2108-4KS2
Dahua NVR4208-4KS2
Dahua NVR2108-4KS2Dahua NVR4208-4KS2
from £102.50 
Outdated Product
Compare prices 1
TOP sellers
Typedigital nvrdigital nvr
Camera connection8 channels8 channels
Features
Features
PTZ
motion response
mobile app
PTZ
motion response
mobile app
Connectors
RCA audio input11
RCA audio output11
USB 2.021
USB 3.2 gen11
HDMI1
/maximum 3840x2160 px./
VGA1
/maximum 1920x1080 px/
LAN11
LAN speed100 Mbps1 Gbps
Alarm input4
Alarm output2
Video recording
Bandwidth80/- Mbps200/96 Mbps
Resolution (all channels)1920x1080 px
Frame rate30 fps
Video compression formatH.265, H.264H.265, H.264
Max. resolution (IP)8 MP (~3840x2160 pixels)8 MP (~3840x2160 pixels)
Drives
Number of SATA12
Max. total capacity6 TB
12 TB /2x6ТБ/
General
Power supply12В12В
Power consumption
3 W /without hard drive/
6.9 W
Operating temperature-10 °C ~ +55 °С-10 °C ~ +55 °С
Maximum humidity90 %90 %
ONVIF
CMS
Dimensions204.6x204.6x45.6 mm375x281.5x56 mm
Weight0.45 kg1.65 kg
Added to E-Catalogoctober 2018september 2017

USB 2.0

The number of USB 2.0 ports provided in the design of the registrar. USB is a universal interface for connecting various peripheral devices. In the case of registrars, we are most often talking about "flash drives" and other external media that can be used to copy files or update firmware. However, compatibility with other devices, such as manipulators (keyboards or mice), may also be provided.

Specifically, USB 2.0 allows you to transfer data at speeds up to 480 Mbps and provides a relatively low power supply. Because of this, this version is generally considered obsolete and is gradually being replaced by more advanced standards (primarily USB 3.2 gen1 - see the corresponding paragraph). However, USB 2.0 connectors are still very popular in registrars.

USB 3.2 gen1

The number of USB 3.2 gen1 ports in the design of the registrar. This interface is used to connect various peripheral devices: USB drives for copying files or updating firmware, keyboards, mice, etc.

Specifically, USB 3.2 gen1 is the successor to USB 2.0. It supports higher data transfer (up to 4.8Gbps) and higher power supply.

LAN speed

The maximum data transfer rate supported by the DVR's LAN ports.

Note that for simple tasks, a rather modest by modern standards speed of 100 Mbps is often enough. However, high bandwidth ( 1 Gbps) not only simplifies the transfer of large amounts of data, but also helps to reduce lags and improve the overall quality of communication; and modern technologies make it possible to provide support for gigabit LAN even in fairly simple and inexpensive registrars.

Of course, in order to use all the features of the LAN, it is necessary that the devices connected to such ports also support the appropriate speeds.

Alarm input

The number of alarm inputs provided in the design of the registrar.

Alarm inputs allow the recorder to respond to various events and signals from other elements of the security system. For example, a door opening sensor can be connected to such an input, and upon a signal from it, the registrar will turn on the camera above this door. This ensures the automation of the security system and makes it less dependent on the human factor.

Alarm output

The number of alarm outputs provided in the design of the registrar.

Alarm outputs are used to transmit signals from the recorder to other elements of the security system — an alarm siren, electronic locks, spotlights, etc. Thus, the system can automatically respond to events recorded by the registrar — for example, block the doors when moving in the frame.

Bandwidth

The maximum data stream in Mbit/s that the NVR is capable of processing when recording and displaying. The throughput parameter is specified as the maximum incoming/outgoing speed, or as the sum of incoming and outgoing streams (total throughput). It is calculated in such a way that the throughput exceeds the total flow of all IP cameras connected to the DVR, and another 25–30% is put in reserve for playing video or viewing it via network access.

Resolution (all channels)

The highest resolution in which the recorder can record video when a signal is received from all channels simultaneously. If cameras are not connected to some channels, the recording resolution may be higher (see “Maximum Resolution”).

Higher resolution has a positive effect on detail, but takes up more space and requires more computing power for processing, which accordingly affects the price of the registrar.

Frame rate

The highest frame rate in the recorded video that the recorder can support when recording from all available channels simultaneously. If not all channels are occupied by cameras, this figure may be higher.

The minimum required for comfortable viewing is 24 fps. And in the most modern video standards, the frame rate can be much higher — 50 – 60 fps. Higher values result in better quality and smoother video that allows you to clearly see fast movement; however, such video takes up more space and requires powerful hardware, which affects the price of recorders.

Number of SATA

The number of SATA connectors provided in the design of the registrar.

SATA is the most popular modern interface for connecting internal drives. One connector allows you to connect one hard drive (or other internal media), that is, the number of such connectors is, in fact, the largest number of separate drives that can be installed inside the recorder at the same time. Basic versions can be equipped with one SATA connector or two. More advanced ones have 4 SATA connectors, and already models for serious objects have much greater connectivity.
Dahua NVR4208-4KS2 often compared