Comparison Hohem iSteady Pro 2 vs Hohem XG1

— For smartphone. Mount for using a smartphone as a camera. Most often it is a kind of clamp, in which the body of the device is tightly clamped. Such clamps usually have a fairly wide range of adjustment for the width of the phone, which allows you to use this type of stabiliser with most modern smartphones, regardless of the diagonal. And some models can even work with compact digital cameras.

— For camera. Attachments designed for use with full-size cameras — SLR and mirrorless (MILC). Such cameras are quite large and have a thread mount for a tripod. All these features are taken into account in the design of the stabiliser.

— For action cameras. Stabilisers designed for action cameras — compact cameras used mainly for shooting dynamic scenes like sports, skiing, cycling, etc. Such devices, by definition, are designed for use in rather extreme activities, including surfing, skiing, paragliding, etc. However, the specific features of different stabilisers may be different, so before buying it's ok to clarify this matter separately. Note that instead of the general name “for action camera”, the stabiliser specifications may contain the names of specific models of action cameras for which the device is designed.

— With camera. Stabilizers equipped with their own cameras. These are integrated directly int...o the stabilizer's construction, eliminating the need for external devices for filming. Moreover, such models are inherently optimized for working with the built-in camera — at the very least, the user doesn't have to deal with balancing the load on the stabilizer's head. Note that the ability to remove and replace the camera with another is usually not provided, although there are occasional exceptions to this rule.

— Phone mount(like a screen). The ability to use your smartphone as your stabiliser screen. The device's camera is not used in this case: filming is carried out either on the built-in camera of the stabiliser or on the action camera attached to it. Note that the smartphone can be used not only as a viewfinder but also to control the camera; specific features depend on the stabiliser model.

— Focus control mechanism. A device that allows the stabiliser controls to focus the lens on the installed camera. It simplifies the use of manual focus lenses greatly.

— Two-handed handle. The two-handed handle increases agility, stability and precision.

— Quick release plate. This element makes it possible to quickly install and remove the camera from the stabiliser without using third-party tools.

— Tripod. The presence of a small tripod in the stabiliser kit — a tripod, which allows you to use the device in a stationary position, setting it on a flat hard surface. Usually the tripod is detachable.

— Remote control. The presence in the kit of a small remote control. It is convenient when the device is installed at a remote distance, for example, in a car.

— Bag / Case. The pre...sence of a bag or case in the standard package of the stabilizer. Bags often come with handles or a strap for convenient carrying, while cases are somewhat simpler — they don't have handles and are designed to be carried in a travel bag, backpack, etc. A bag or case protects the device from dust and other contaminants and to some extent shields the contents from damage in case of bumps or falls. Additionally, bags or cases can often be used to store extra accessories.

The maximum weight that the stabiliser is designed to carry.

This is the maximum weight of the camera with all accessories allowed for this model.

The range of rotation angles supported by the steadicam.

In this case, it means turning the camera to the right or left, without tilting back and forth.

The capacity of the battery used in the stabiliser.

In theory, a higher capacity allows you to work longer without recharging, but the battery life of the stabiliser also depends on its power consumption. So, only models with similar performance characteristics can be compared with each other according to this indicator; and when choosing, it is better to focus not on the capacity, but on the directly claimed battery life.

The maximum length of time the device will work before it needs its battery to be recharged. It is worth considering that the manufacturer indicates the maximum time, which does not correspond to real indicators due to the conditions and intensity of use.

The ability of stabiliser to work steadicam in power bank mode — an external battery for various portable devices. It allows the device to share its energy with the phone, and the recording is not yet over.

— Joystick. Usually, the joystick has the form of a switch that can move or tilt in different directions. With it, the user can control the position of the camera mounted on the stabiliser — namely, tilt it and turn it to the sides.

— Buttons. The presence of buttons for turning the camera in one direction or another. Compared to joystick control, it is a less comfortable and convenient solution.

— Time lapse. Shooting video in time lapse mode involves a very low frame rate (one frame every few seconds, or even minutes). In the completed video, the effect of fast movement is achieved (for example, the day from sunrise to sunset fits in just a few minutes). However, this is the general principle of time lapse; but the specific ways of its implementation may be different depending on the specific model of the stabiliser.

- Selfie mode. A separate mode for shooting selfies. This function can be implemented in different ways, depending on the purpose of the device. It is aimed at filming himself and the immediate environment of the operator.

- Sports mode. The mode is designed for high-quality shooting of dynamic scenes in motion. In sports mode, the stabiliser automatically compensates for frame deviations from the reference location, while the motor runs at the highest possible speed.

- Panorama. In this shooting mode, the camera attached to the device automatically rotates around its axis, taking a series of shots, from which the panoramic image is then “glued together”. Most often, this function involves the creation of horizontal panoramas. However, camera movement in the vertical plane can also be provided.

— Tracking mode. Automatic tracking of a...certain object by pointing the camera so that the shooting target is constantly in the centre of the image, or at least in the frame. The subject for tracking is set by the stabiliser operator.

— Inversion mode. This mode allows you to turn the device upside down, retaining all its functions and camera position. It will come in handy when shooting from atypical angles (for example, from the ground).