Comparison Gorenje VS120W vs Redmond RVS-M020

The width of the seam created by the vacuum sealer's welding slat.

The wider the seam, the more reliable the package is, the lower the likelihood that the welding line will turn out to be a “weak spot”. On the other hand, a large width requires a powerful heater and significantly affects the price of the device. In general, for domestic use, a value of 2 – 2.5 mm is considered quite sufficient; but in heavy industrial models used for long-term storage, values of 10 mm and even more can occur.

For additional reliability, the seam can be made double (see "Features").

— Vacuuming of containers. The use of a device for extracting air from containers with special valves is essential for manual packing purposes, and it is also employed in other variations where a dedicated hose connects to the container.

— Vacuuming of bottles. Using a device to extract air from bottles extends the shelf life of air-reactive liquids, such as wine and certain vegetable oils. This process involves vacuuming the bottles using specialized stoppers equipped with valves, which are typically provided with the device.

— For moisture-containing products. The device can be used for packaging products with high moisture content. These models have a unique feature of slightly longer sealing time, where the packer carefully heats the seam to allow any moisture from the contents to evaporate. This ensures the quality of the final seal remains unaffected by the moisture.

— Double welded seam. Using a double welding seam involves creating two parallel seams on a package, spaced a few millimeters apart. This approach significantly boosts the package's reliability because if one seam becomes defective, the second seam can serve as a backup and remain intact, ensuring the package's durability.

— Vacuum adjustment. The device offers the flexibility to select the desired level of vacuuming for p...ackaging. This feature provides various options to suit specific situations. For long-term storage, users can opt for the deepest vacuum possible, while for delicate products, the vacuuming degree can be reduced to prevent excessive compression that might damage the items. It's important to note that this functionality goes beyond just pausing the process; instead, the device offers multiple distinct programs, each with its predefined degree of vacuuming.

— Container for a roll. The device includes a built-in container for a roll of packaging film, ensuring convenient access to the packaging material. The container is designed with a user-friendly unwinding mechanism, and it may also feature an integrated film cutter, though this is not always a mandatory component (see the relevant section).

— Built-in film cutter. The presence of a built-in knife for the film in the design of the packer. Own knife allows you to accurately cut the right amount of packaging material without resorting to the use of scissors or other additional tools.

— A container for collecting liquid. The packer is equipped with a dedicated container designed to collect both the liquid drawn in by the vacuum pump and the extracted air. This feature is particularly beneficial when packaging moisture-rich products, as it prevents the liquid from entering the pump or spilling out. Instead, the liquid accumulates in the container, allowing for easy and convenient disposal.

The main material used in the construction of the body of vacuum sealer.

— Plastic. Plastic is inexpensive and quite practical, but noticeably inferior to metal in terms of strength, heat resistance and scratch resistance. Therefore, it is mainly used in devices that are not designed for large volumes of work and high loads — namely, manual and low-power desktop vacuum sealers.

— Metal. Metal cases are extremely strong and reliable, but they are more expensive and weigh more than plastic cases. Therefore, they are found mainly in powerful industrial models, for which strength and reliability are of decisive importance.

— Plastic / metal. Usually, in this case, plastic cases are meant, in which especially critical places are reinforced with metal inserts. This option is typical mainly for desktop models of intermediate and advanced levels. See above for details on plastic and metal; Here, we note that such a combination makes it possible to combine the advantages and, to some extent, mutually compensate for the shortcomings of both materials. So, the cases are not as expensive and heavy as all-metal ones, and at the same time more reliable than all-plastic ones.