Comparison Bosch EasyShear 0600833300 vs Bosch ISIO 0600833102

Clear Table
Add to comparison
	Bosch EasyShear 0600833300	Bosch ISIO 0600833102
	from £50.95 up to £63.49 Compare prices 10	£59.99 Compare prices 1
all specs only differences
TOP sellers	Amazon.co.uk £56.00 Buy in shop Autodoc.co.uk £52.00 Buy in shop BricoINN £55.00 Buy in shop	Idealo.co.uk £60.00 Buy in shop
Main	Quick nozzle change without additional tools. Charging via micro-USB adapter.	Bosch-SDS system - keyless nozzle change. New type of attachment attachment – Multi-Click. Anti-lock braking system. Two nozzles. Battery charge indicator.
Type	for hedge	for hedge
Power source	battery	battery
Attachments	for hedge for grass	for hedge for grass
Pole length	120 mm /for bushes; 80 mm / for grass (width)/	120 mm /for bushes / 80 mm - for grass/
Tooth pitch	8 mm	8 mm
Battery	built-in	built-in
Battery voltage	3.6 V	3.6 V
Capacity	1.5 Ah	1.5 Ah
Operating time	40 min	50 min
Charging time	3 h	3.5 h
Noise level	70 dB	70 dB
Weight	0.53 kg	0.55 kg
Added to E-Catalog	april 2020	april 2014

Operating time

The maximum time for which the cordless hedge trimmer can work without additional charging. Note that the maximum period is indicated, which is often overestimated by the manufacturer and is calculated at idle. Under load, this parameter will be less.

Charging time

The time it takes to charge the brush cutter battery from 0 to 100%.

Weight

The total weight of the brush cutter. Usually indicated for a fully equipped tool, with an attachment installed and, in the case of a petrol engine, a full tank of fuel; however, there may be exceptions. Usually, the relevant data is indicated in the official documentation.

This parameter is important, first of all, taking into account the fact that the tool during work will have to be kept on weight most of the time. Accordingly, the lighter the brush cutter, the longer you can work with it without interruption, the less often you have to rest. On the other hand, a large weight also has its advantages: a heavy tool is more stable and does not “tear out of hand” as much under high loads on the nozzle.