Dark mode
United Kingdom
Choose city or write postal code
We were unable to accurately determine your city. Please, select a city to display stores and prices for your region.
Catalog   /   Computing   /   Networking   /   Switches

Comparison TP-LINK TL-SG105MPE vs TP-LINK TL-SG105PE

Add to comparison
TP-LINK TL-SG105MPE
TP-LINK TL-SG105PE
TP-LINK TL-SG105MPETP-LINK TL-SG105PE
Compare prices 9Compare prices 12
TOP sellers
Typemanaged 2 level (L2)managed 2 level (L2)
Mountdesktopdesktop
Bandwidth10 Gbps
MAC address table size2K
Ports
Gigabit Ethernet55
Uplink11
Uplink typeGigabit EthernetGigabit Ethernet
Features
Control
Web interface
Web interface
Basic features
Link Aggregation
VLAN
loop protection
access rate limit
Link Aggregation
VLAN
loop protection
access rate limit
PoE
PoE (output)802.3af/at802.3af/at
PoE outputs44
PoE output power30 W30 W
Total PoE power120 W65 W
General
PSUexternalexternal
Supply voltage54 В53 В
Power consumption4.3 W
Operating temperature0 °C ~ +40 °C0 °C ~ +40 °C
Dimensions (WxDxH)100x98x25 mm100x98x25 mm
Added to E-Catalogmay 2023december 2020
When you make a purchase through links on our site, we may receive a affiliate commission.

TP-Link TL-SG105MPE 5-Port Gigabit Easy Smart Switch with TL-SG105MPE

TP-LINK (TL-SG105MPE) TP-Link TL-SG105MPE 5-Port Gigabit Easy Smart Switch with 4-Port PoE+...
Senetic.co.uk
Delivery: to United Kingdom
Report
£77.46

TP-Link 5-Port Gigabit Easy Smart Switch with 4-Port PoE 8TP10380260

TP-Link power over internet, 5 port Gigabit, easy smart switch. Simple and easy to set-up and use. The fanless design lowers... moreenergy consumption and operating noise.
OfficeStationery.co.uk
Delivery: in United Kingdom
Report
£91.24

Tp-link TL-SG105MPE

Simple intelligent switch.Gigabit of 5 ports with poe+ of 4 ports.Five rj45 ports of 10/100/1000mbps.Equipped with four 802.3... moreaf/at poe+ ports with up to 30 w for each port, data and food can be transferred into a single cable.Admit poe food up to 120 w for all poe ports.Provides network monitoring, traffic prioritization, vlan functions and poe´s automatic recovery.Simple network configuration in addition to plug-and-play connectivity.The web -based user interface and easy smart configuration usefulness simplify the configuration.Fan design reduces energy consumption and eliminates operating noise.Brand:tp link.Model:tl-sg105mpe.Hardware characteristics.-standards and protocols:ieee 802.3i, ieee 802.3u, ieee 802.3ab, ieee 802.3af, ieee 802.3x, ieee 802.1q, ieee 802.1p, ieee 802.3at.-interface:five rj45 ports of 10/100/1000mbps automatic/mdi/mdix mdi.Network media.-10base -t:utp cable category 3, 4, 5 (maximum 100 m).-eia/tia-568 100 ω stp (maximum 100 m).-100base-tx:utp category 5, cable 5e (maximum 100m).-eia/tia-568 100 ω stp (maximum 100 m).-1000base-t:utp cable category 5, 5e, 6 or higher (maximum 100 m).-eia/tia-568 100 ω stp (maximum 100 m).-power supply:external feed adapter (output:53.5 vcc / 2.43 a).Poe ports (rj45).-standard:compatible with 802.3 af/at.-poe ports:port 1- puerto 4.-poe energy budget:120 w.Software characteristics.Quality of service.-port -based priority compatibility/802.1p/dscp.-admit 4 priority tails.-rate limit.-storm control.Features:l2.-igmp v1/v2/v3 inquiry.-aggregation of static links.-duplication of ports.-cable diagnosis.-loops prevention.-poe automatic recovery.-extended mode.Vlan.-admits up to 32 vlan simultaneously (4k vlan id).-mtu/port/vlan label.Management.-web -based gui.-easy intelligent configuration utility.-transmission method:storage and forwarding.Performance.-switching capacity:10 gbps.-package forwarder rate:7.44 mpps.-mac addresses table:2 k.-package buffer memory:1 mb.-jumbo frame:16 kb.Other features.-certifications:fcc, ce, rohs.-dimensions:99.8 x 98 x 25 mm.-assembly:rack assembly.-maximum power consumption:4.34 w (220 v/50 hz without connected pd), 137.01 w (110 v/50 hz with 120 w pd connected).-max heat dissipation:14.8 btu/h (without connected pd), 467.17 btu/h (with 120 w pd connected).-system requirements:microsoft® windows® to execute the utility.Content.-tl-sg105mpe.-power adapter.-installation guide.-rubber legs.Review date.03-31-2023 by hbg.
Tradeinn.com
Delivery: in United Kingdom
Report
£74.99

TP-Link 5-Port Gigabit Easy Smart Switch with 4-Port PoE+ TL-SG105MPE

Management featuresWeb-based managementYesSwitch layerL2Ports & interfacesBasic switching RJ-45 Ethernet ports quantity5Basic... moreswitching RJ-45 Ethernet ports typeGigabit Ethernet (10/100/1000)Installed SFP modules quantity0Installed SFP+ modules quantity0NetworkNetworking standardsIEEE 802.1Q, IEEE 802.1p, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3i, IEEE 802.3u, IEEE 802.3xRate limitingYesPort mirroringYesBroadcast storm controlYes10G supportNoIGMP snoopingYesData transmissionJumbo
ComputersDeal.com
Delivery: in United Kingdom
Report
£99.13

TP-Link 5-Port Gigabit Easy Smart Switch with 4-Port PoE+ TL-SG105MPE

Management featuresWeb-based managementYesSwitch layerL2Ports & interfacesBasic switching RJ-45 Ethernet ports quantity5Basic... moreswitching RJ-45 Ethernet ports typeGigabit Ethernet (10/100/1000)Installed SFP modules quantity0Installed SFP+ modules quantity0NetworkNetworking standardsIEEE 802.1Q, IEEE 802.1p, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3i, IEEE 802.3u, IEEE 802.3xRate limitingYesPort mirroringYesBroadcast storm controlYes10G supportNoIGMP snoopingYesData transmissionJumbo
itsupplies.uk
Delivery: to United Kingdom
Report
£82.61
4 more offer(s)

Bandwidth

The bandwidth of a switch is the maximum amount of traffic that it can handle. Specified in gigabits per second.

This parameter directly depends on the number of network ports in the device (excluding Uplink). Actually, even if the bandwidth is not given in the specifications, it can still be calculated using the following formula: the number of ports multiplied by the bandwidth of an individual port and multiplied by two (since both incoming and outgoing traffic are taken into account). For example, a model with 8 Gigabit Ethernet connectors and 2 SFP ports will have a bandwidth of (8*1 + 2*1)*2 = 20 Gbps.

The choice for this indicator is quite obvious: you need to evaluate the expected traffic volumes in the serviced network segment and make sure that the switch's bandwidth will cover it with a margin of at least 10-15% (this will give an additional guarantee in case of emergency situations). At the same time, if you plan to often work at high, close to maximum, loads, it will not hurt to clarify such a characteristic as the internal bandwidth of the switch. It is usually given in a detailed technical description, and if this value is less than the total throughput, serious problems may arise under significant loads.

MAC address table size

The maximum number of MAC addresses that can be stored in the Switch's memory at the same time. Specified in thousands, for example, 8K — 8K.

Recall that the MAC address is the unique address of each individual network device used in physical routing (at layer 2 of the OSI network model). Switches of all types work with such addresses. And it is worth choosing a switch according to the size of the table, taking into account the maximum number of devices that are supposed to be used with it (including based on the possible expansion of the network). If the table is not enough, the switch will overwrite new addresses over the old ones, which can noticeably slow down the work.

Total PoE power

The total output power provided by the switch when powering devices using the PoE standard (see above).

This indicator usually corresponds to the sum of the powers of all outputs — that is, the power of one PoE port, multiplied by their total number. However, the power limits for one output and for the entire switch are somewhat different: if a load with a power equal to the output power of the power supply on this connector can be connected to a single connector, then the total power consumption of all devices connected via PoE should ideally not exceed 75% of the total power supply — this gives an additional guarantee in case of malfunctions. In fact, this means that all PoE outputs cannot be used “to the fullest” at the same time. For example, if there are two such outputs, and one is loaded at 100%, then the second can be loaded with a maximum of 50% — the total power consumption in this case will be the same 75% of the total output. Therefore, a large total power is needed when using the device to the maximum.

Supply voltage

The amount of voltage required by the switch for uninterrupted operation. The power supply voltage of network equipment can vary from 5 V to 230 V, which allows you to power compatible devices from either a low-voltage USB socket on your computer or a standard household outlet. Values in the middle assume that the switch is powered by the appropriate power supply.

Power consumption

Power consumed by network equipment during operation. Knowing the indicator of energy consumption, you can, for example, calculate the battery life of equipment from an uninterruptible power supply or choose a suitable “uninterruptible power supply”.
TP-LINK TL-SG105PE often compared