Comparison Weber Compact Kettle 47 vs Weber Compact Kettle 57

The size of the working surface provided in the device, in length and width; for round surfaces, two sizes are also given (both of them correspond to the diameter).

Note that in many models these dimensions coincide with the overall dimensions in length and width (see "Dimensions (WxL)"), therefore, in some cases, information on the working surface may not be specified; a typical example is classic rectangular barbecues. There is also the opposite option — when only this parameter is given, without indicating the overall dimensions; in such cases, these dimensions usually also coincide with the dimensions of the working surface (or differ from them very slightly).

Anyway, the size of the working surface allows you to evaluate the total capacity of the product, as well as some other features. For example, for tandoors (see "Type"), the size of the neck can be given in this paragraph, but the firebox can be wider. However, anyway, two points should be taken into account. Firstly, it is necessary to take into account not only the dimensions, but also the shape of the surface; this is especially true for barbecue grills, where the options in form are quite diverse. Secondly, the larger size inevitably affects the dimensions and cost, and often also the weight of the device.

Product height in working position.

If there is no cover or canopy in the design or delivery set (see “Functions and Capabilities”), then the total height, usually, corresponds to the height of the grate, seats for skewers or other work surface. If there is a cover or canopy, then the height is given according to the overall size of the structure, and it usually does not correspond to the actual height of the working surface; the latter should be specified according to the manufacturer's documentation. However, when it comes to the lid, this difference is usually not particularly critical; but the canopy is usually located at a considerable height (comparable to the height of a person, or even noticeably greater).

In general, a height of 50 cm or less is considered relatively small, 50 – 100 cm — medium, more than 100 cm — significant. However, when choosing a particular product, it is worth considering both the nuances described above and other features. For example, if you are looking for a portable brazier for hiking "forays" into nature, it makes sense to pay attention to low and, accordingly, light and compact models. And for professional use, when you have to “stand over cooking” often and for a long time, higher models are better suited, which you don’t have to bend over to check readiness, turn skewers, etc.

Dimensions of the product deployed to the working position, in length and width; for round models, both of these dimensions are also indicated, just in such cases they are usually the same (equal to the diameter).

The general meaning of this characteristic is as follows: a larger product (with the same shape and type) usually has a larger capacity, but it turns out to be more bulky (including when folded, if such a possibility is provided), heavy and expensive. Moreover, in many cases, the overall dimensions in length and width correspond to the size of the working surface; a classic example is the traditional rectangular brazier, as well as many barbecue grills of the same shape. So if the data on the working surface (see below) are not separately indicated in the characteristics, then it may well be that the size of the brazier is equal to the overall dimensions (or differs very slightly from them). For a full guarantee in such cases, you should pay attention to the photographs of the product: if there are no shelves or other similar elements in the design that affect the length and width, then these dimensions can be used to estimate the dimensions of the working surface (that is, the total capacity and other related nuances ). For example, in the case of a traditional brazier, the width of the firebox determines the minimum length of the skewer (the skewer should be slightly longer to cover the firebox when installed across); and the number of places for skewers...directly depends on the length of the barbecue (ideally, there should be at least 60 mm between these places). If the dimensions of the working surface are given in the characteristics, then it is worth evaluating the practical capabilities of the product according to these dimensions; the overall dimensions in such cases only allow us to estimate the amount of space occupied by this model.

Also note that the height of the structure in the characteristics is indicated separately — in this case it has a different meaning than the length and width.

The total weight of the product, taking into account the main elements of equipment (lids, canopy, food stands, etc.), but excluding fuel.

It is worth evaluating this indicator taking into account the type of device. So, the most compact barbecues and barbecue grills can weigh 4-6 kg or even less(in camping barbecues, the weight does not exceed these values at all); 7 – 10 kg for such models is considered an average, and larger values \u200b\u200bare typical mainly for large stationary structures of high capacity. But ceramic grills and tandoors are, by definition, massive: in the first case, even in the lightest models, the weight exceeds 10 kg, in the second it is usually more than 50 kg.

Anyway, note that both small and significant weight have their advantages. So, with similar functionality, a lighter device will be more convenient to transport, but this convenience will have to be paid for by reducing the height (which affects convenience), reducing the capacity and/or thinner walls of the furnace (which reduces reliability for metal walls, worsens for ceramic ones). efficiency). Conversely, a heavier structure will be more reliable, durable, often more spacious, but at the same time less convenient when moving from place to place, and often more cumbersome.