Preamplifier
The number of preamplifiers in the design of an audio interface, designed to work with a weak signal - which directly comes from a microphone, pickup, etc. Each preamp corresponds to one low-level input channel. For example, if an audio interface has four preamps, it can simultaneously process signals from four microphones or other devices connected to those preamps. Professional studio audio interfaces are often equipped with a large number of preamps to provide flexibility and the ability to record from a large number of sources simultaneously.
Main
Through the Main outputs it is supposed to transmit signals from the audio interface to external devices for playing and recording sound. In everyday use, there are models with one type of Main connector, as well as with several varieties (for example, Jack (6.35 mm), XLR, RCA, or Jack (6.35 mm) / RCA, or Jack (6.35 mm) / XLR).
—
Jack (6.35 mm). Output for transmitting analog audio signal. Structurally similar to the popular mini-Jack, but differs from it in its larger dimensions. As a result, Jack type plugs (6.35 mm) are used primarily in high-end stationary audio equipment. Outputs of this type usually operate on a “one channel per connector” principle (i.e., to transmit stereo sound you will need to use two Jack sockets). Also, this interface often provides a balanced connection - a connection in a special format that allows the use of long wires without compromising the signal quality (due to the suppression of interference in the wire itself). However, the Jack connection (6.35 mm) may also be unbalanced.
-
XLR. Another type of output for transmitting an analog signal using a balanced connection. It allows the use of long cable lengths without compromising the quality of data exchange - external interference is absorbed directly in the cable. Often the connector is combined with a Jack interface (6.5 mm). The XLR is equipped with a locking lock and three contacts. A single three-pin an
...alog cable can only carry one channel of audio, so a standard XLR output typically consists of two jacks, stereo left and right.
- RCA. Jacks for coaxial cables with characteristic plugs, popularly known as “tulips”. One cable in analog format can transmit one channel of audio. The standard output of this type consists of two connectors - for the left and right stereo channels. On the other hand, RCA does not provide the possibility of a balanced connection, which is why it is inferior to other options in noise immunity, has noticeable limitations on cable length and is poorly suitable for professional use. Nevertheless, “tulips” have become very widespread in entry-level and mid-level stationary audio equipment.Line
The type of line output provided in the audio interface design. It outputs a line-level analog audio signal. This interface is mainly used for connecting recording devices, outputting a signal to playback equipment or to an external amplifier. And the types of connectors used for linear output can be as follows:
—
mini-Jack (3.5 mm). A standard socket for the popular mini-Jack plug (3.5 mm), used as a line output. This connector is mainly used to connect some models of active speakers, while two stereo channels are usually output through one mini-Jack (3.5 mm). Note that headphone outputs, which also use a mini-Jack, are considered separately - see the corresponding paragraph.
—
Jack (6.35 mm). A larger analogue of the mini-Jack connector (3.5 mm) for outputting an analog stereo signal. The Jack output provides a more reliable and noise-free connection, making it ideal for professional applications. Effective protection against interference is possible with a balanced connection method. To save space, the 6.35 mm output can be combined with an XLR connector (see the corresponding paragraph). The disadvantage of this design is the impossibility of using both interfaces simultaneously. Jack line outputs (6.35 mm) adhere to the “one channel per connector” principle.
-
XLR. A round three-pin connector for outputting a line-level analog audio signal, oft
...en with a balanced connection type. Transmission is carried out over three wires instead of two, and during it the noise induced on the wire is eliminated. This allows the use of fairly long cables without compromising the “purity” of the signal, making this type of connection excellent for professional audio equipment. XLR is also considered a professional interface, both due to the ability to work with a balanced signal and due to increased reliability: such connectors are often equipped with locks to secure the plugs.
- RCA. Analog linear audio output using RCA connectors - so-called “tulips” (due to the characteristic shape of the plugs). The standard output of this type consists of two connectors - for the left and right stereo channels. Also note that RCA connectors can be used in other output interfaces, but they have their own names.To monitors
Output connectors for connecting monitor speakers or headphones. Connecting monitors to the output of an audio interface allows musicians, sound designers, or sound engineers to monitor audio quality in real time. In audio interfaces,
monitor outputs can be made in various formats, but most often there are various combinations of RCA, XLR and Jack connectors (6.35 mm), less often - the classic mini-Jack (3.5 mm).
USB
Number and type of USB ports in the device. Most often, audio interfaces contain full-size USB A connectors, and their number can vary from 1 to 3 pcs. Such ports are being replaced in modern models by more compact USB type C, which allows the plug to be inserted in either direction. Somewhat less commonly, audio interfaces can be equipped with USB B ports, while desktop models can be equipped with microUSB connectors.
Software included
The software included with your audio interface may vary depending on the make and model. The vast majority of it is represented by drivers, utilities for managing the device, software for recording and editing sound, virtual instruments or effects, and all kinds of plugins. It is advisable to clarify separately which specific software components are included in the audio interface package.
ОС
Supported operating systems ensure device compatibility with computers running different platforms. The following options are widespread in audio interfaces:
-Windows. The vast majority of audio interfaces provide drivers and software for compatibility with the popular Windows operating system. At the same time, it is important to clarify the supported OS versions - in modern realities, these are Windows 10 and Windows 11.
-
macOS. Support for working with Apple computers and laptops that use the proprietary macOS platform.
-
iOS. The ability to work with mobile applications for creating and processing sound, implemented when using Apple smartphones running the iOS operating system.
-
iPadOS. In this version, the audio interfaces support work with Apple tablets running the proprietary iPadOS operating system.
-
Android. Compatibility of the audio interface with mobile devices based on the popular Android platform. This involves using mobile versions of applications for creating and processing sound.
-
Linux. Support for the Linux platform is less common among audio interfaces, and not all devices provide official drivers for this operating system.
—Chrome. The device is compatible
...with laptops running the Chrome OS operating system. These are rarely found in common use, but they do occur.Power supply
Power supply methods provided in the device. There are models that combine combined power supply methods - for example, from the mains and USB. For more details, see individual help items.
—
From the network. Powered by a regular household power supply of 230 V. Stationary audio equipment uses only this method of power supply, but in compact devices it can be combined with a USB connection, battery power, or the presence of a battery.
-
USB. Powered by the same USB connector that connects the device to external equipment. This power supply method allows you to do without unnecessary wires and work independently of sockets, but its power is low, so this option is used only in compact devices. Some models combine USB power with a built-in battery or supplement mains power, providing a backup option in case there are no outlets.
—
Battery. The presence of a built-in battery allows the device to operate independently of any external energy sources, however, the period of such operation is limited - at some point you will still have to take a break to charge the battery. In its pure form, this type of power supply is extremely rare - much more often the rechargeable battery is provided as a “backup option” that supplements power from the network or USB (see the corresponding paragraphs).
—
Batteries. Powered by
...replaceable elements of a standard size - for example, “finger-type” AA. Note that among such elements there are both disposable batteries and rechargeable batteries. This gives the user a choice: regularly purchase fresh elements or spend money once on batteries and a “charger” for them. However, in any case, power from batteries is associated with additional costs - such power supplies are usually not included in the kit and have to be purchased separately. This option is found mainly among portable models.External power supply
The presence of
an external power supply in the device, which is located outside the case. This design feature is designed to reduce the amount of interference that affects the electronic components of the device and can distort the sound. Also, due to the external power supply, the device becomes more compact and lightweight.