Comparison Besser 10248 black vs Esperanza Krakatau black

The number of Hi-Light burners in the stove design.

Hi-Light is an improved kind of electric burner in comparison with the solid plate ones described above (see "Hob type"). In such burners, the tubular heating element is replaced by a thin metal strip, and the working surface is usually made of glass-ceramic (see "Hob material"). Due to this, the heating and cooling rate of such burners is much higher than that of solid plate ones (although it does not reach the instantaneous reaction of gas stoves).

The number of induction burners in the stove design.

Induction burners work due to electromagnetic radiation, which creates special currents in the bottom of the cookware — these currents provide heating. At the same time, the burners do not heat up — they are heated only by the heat from the dishes, so this type of heater is the safest. Another advantage is that the burners react instantly to a change in heating power — as in gas stoves. On the other hand, induction heaters are quite expensive and have specific requirements for cookware: for effective heating, it must have a thick metal bottom. However, a lot of dishes these days are being produced and created based on the possibility of working with such burners. And the variety of stoves starts with models with 1 burner(portable devices without an oven).

Rated burner power. This parameter allows you to estimate how much electricity the burner will spend when operating at maximum heating intensity. At the same time, the heat transfer power of different burners can be different, and the actual heating efficiency will also greatly depend on the specs of the dishes. As a result, it hardly makes sense to evaluate the operating capabilities of the stove by the power of the burners. It is quite possible to proceed from the fact that the burner will be enough for a dish of the same diameter.

A display on the stove control panel. Usually, it is a very simple one-colour display : 3-4 digits plus a few additional characters (for example, a thermometer icon and a clock icon). However, even on such a display, almost all important information related to the stove operation can be displayed: heating temperature, clock, timer settings, and other relevant data. Thus, the display significantly simplifies the management of the stove and makes it more convenient.

For technical reasons, this function is mainly used in electric stoves; there are also gas models with displays, but they are extremely few.

The connected load of the stove is the maximum electrical power consumed during operation. This parameter is indicated only for models that are equipped with at least one electric heater — burner (burners), oven or grill. It is the burners that are the highest consumption in terms of energy consumption; Features such as auto-ignition or oven lighting require little energy, a ordinary socket is enough for them.

First of all, the requirements for the power grid depend on this indicator: it must be able to provide such power without overload. It is worth noting that for household sockets the power limit is about 3 – 3.5 kW; with more power, you need to connect the stove to a 230 V network according to special rules. An alternative is a three-phase 400 V mains: most modern stoves with electric heaters allow connection to both 230 V and 400 V.