Comparison Gorenje GK 5C61 WH white vs Gorenje GK 5C41 WF-B white

The type of hob provided in the stove.

The hob is the main working part of the stove, its top part, where the burners are located. The type of such a hob depends on the type of burners:

— Gas. Gas burners are convenient, first of all, with an instant reaction to turning the power regulator knob. In addition, dishes made of any materials and with any shape of the bottom are suitable for them — provided that they normally tolerate heat and stand stably on the grates. In addition, in operation, such stoves are cheaper than electric ones. Their main disadvantage is the need to connect gas. Firstly, gas pipelines are far from being everywhere; and using interchangeable gas cylinders is a rather troublesome business. Secondly, the connection requires carefulness — it must be carried out by a gas specialist. Also, note that gas burners are more demanding on compliance with safety rules than electric ones.

— Electric. Electric hobs are safe and easy to use: there are no open flames that need to be ignited and can go out, causing a gas leak. In such devices, it is easier to implement various additional functions than in gas stoves. In addition, electricity is available in any home, unlike gas. And the connection procedure is quite simple (although it may also require the participation of a specialist). On the other hand, electric hobs have high energy consumption. Therefore, they requir...e high-quality wiring and are more expensive to operate than gas stoves. Another drawback is significant thermal inertia. However, in some advanced types of burners ( Hi-Light, induction — see below), this drawback is minimized. Also, note that all electric burners are demanding on the shape of the dishes: they must have a flat bottom for tight contact with the burner, and induction heaters are also limited in materials.

— Combined. A hob that combines gas and electric burners. The most popular format of such models is “3 + 1”, 3 gas burners and 1 electric. So we are talking about gas stoves, supplemented by an electric burner. The most notable advantage of such hobs is the ability to work even if one of the energy sources is not available. In addition, the combination of different burners allows the user to choose the optimal type of heating for a given situation. At the same time, such versatility is rarely necessary, and when connected, combined hobs combine all the complexities of gas and electric ones: they require gas supply, the participation of a specialist, and high-quality wiring. As a result, there are relatively few such models produced, and they are designed mainly for those who want to have an option in case of problems with gas supply.

It is the volume of the oven provided in the stove. It s the maximum volume of products that can be placed in it without compromising work efficiency. Accordingly, a larger oven is useful for large volumes of cooking; on the other hand, such a capacity will significantly affect the price and dimensions of the stove.

If you buy a regular household stove with 4 burners and do not plan to cook a lot in the oven, you can not pay much attention to this parameter. The capacity of the oven is usually enough for most simple tasks like cooking a pie or baking chicken. But for more serious tasks, a larger oven may be required. Detailed recommendations on volumes can be found in special sources.

If there is an additional chamber (see below), this paragraph usually indicates only the volume of the main oven.

Rated power of the oven installed in the stove. Specified only for electric ovens (see above). When determining this parameter, the power of all heaters and other devices installed in the oven (grill, convector, motorized spit, etc.) is taken into account; in other words, this item indicates the maximum power consumption.

This data is useful primarily for assessing electricity consumption, as well as the connected load during operation. But only ovens with similar functionality can be compared with each other in terms of power — for example, two models with convection. Otherwise, the comparison may be incorrect.

It is the number of cooking modes provided in the design of the oven. This item shows the typical cooking modes — for example, “heating”, “heating + convection”, etc. Accordingly, this parameter is highly dependent on additional equipment. However, even in similar models, the number of modes may be different. In general, the more there are, the more opportunities for cooking, and the easier it will be to choose the optimal mode for a specific situation.

Such a device is responsible for pulling the door when closing and, in some models when opening. The idea is that the user does not need to close/open the door completely — pull it to the right place, and then the door will be "picked up" by the door closer and smoothly brought to a fully open or closed state. Such a system eliminates the risk of leaving the oven not completely closed and prolongs the life span of the device.

It is the material from which the burner grates of the stove are made. This parameter is relevant only for gas burners — electric hobs do not have grates.

— Steel grates. The most common type of grates is steel grates coated with a special heat-resistant enamel. They are quite practical, reliable, have a relatively small weight and neat appearance, and at the same time are inexpensive, due to which they are often found in entry-level and middle-level models. The main disadvantage of steel grates can be called the difficulty in cleaning from adhering contaminants — too intensive cleaning can damage the enamel. In addition, they are less durable than cast iron ones, and under heavy dishes containers, they can deform — as a result, the dishes will not stand stably on the stove, and the grate will most likely have to be replaced.

— Cast iron grates. Cast iron grates is much heavier than steel ones. Moreover, they often look more massive and rough. On the other hand, they are more reliable, durable and stable, can cope even with heavy weights and keep their working shape much longer. In addition, cast iron is easier to clean: although dirt comes off worse than enamel, in extreme situations it is quite possible to use abrasive products without fear of damaging the surface.

The connected load of the stove is the maximum electrical power consumed during operation. This parameter is indicated only for models that are equipped with at least one electric heater — burner (burners), oven or grill. It is the burners that are the highest consumption in terms of energy consumption; Features such as auto-ignition or oven lighting require little energy, a ordinary socket is enough for them.

First of all, the requirements for the power grid depend on this indicator: it must be able to provide such power without overload. It is worth noting that for household sockets the power limit is about 3 – 3.5 kW; with more power, you need to connect the stove to a 230 V network according to special rules. An alternative is a three-phase 400 V mains: most modern stoves with electric heaters allow connection to both 230 V and 400 V.