United Kingdom
Catalog   /   Small Appliances   /   Kitchen   /   Food Processors

Comparison FIRST Austria FA-5259-3 vs FIRST Austria FA-5259

Add to comparison
FIRST Austria FA-5259-3
FIRST Austria FA-5259
FIRST Austria FA-5259-3FIRST Austria FA-5259
Outdated Product
from £182.90 
Outdated Product
TOP sellers
Typeplanetary mixerplanetary mixer
Equipment
Nozzles
main bowl
main bowl
Installation of extra nozzles
Accessories
whisk
beater for mixing
nozzle / dough hook
whisk
beater for mixing
nozzle / dough hook
Characteristics
Bowl capacity5 L6 L
Power700 W1500 W
Max. revolutions465 rpm
Number of speeds1010
Smooth speed control
Pulse mode
General
Main bowl materialmetalmetal
Body materialmetalplastic
Cable length1 m
Dimensions (LxWxH)38x35x20 cm
Weight6 kg
Color
Added to E-Catalogjuly 2017april 2016

Installation of extra nozzles

Possibility of turning a planetary mixer into a food processor. Such devices have several shafts, when installed on which the relevant nozzles (available separately), you can add extra functions of a blender, food processor, meat grinder, etc. Accordingly , the installation of additional nozzles allows you to turn the planetary mixer into a food processor in the future.

Bowl capacity

The volume of the food bowl provided in the food processor. Most often the full volume is indicated, not the working volume. It should be noted that you can not use the bowl completely when cooking, the working volume is approximately 70% of the total. Thus, about 4 liters can be used in a 6 liter bowl. And if you go into the recipes and power modes of the food processor (see the instructions), then smaller numbers are acceptable for preparing a particular dish (kneading dough, mixing salad, etc.).

Note that a large capacity affects the dimensions and weight of the unit, and also requires a more powerful engine — which affects energy consumption and price. So when choosing a bowl by capacity, you should not chase the maximum capacity, but take into account the planned volumes of work.

Power

Rated power of the food processor. Most of this power comes from the engine — the rest of the unit consumes very little energy. Usually, the more power, the higher the productivity of the unit, and the less time it takes to process products.

Note that the optimal power value directly depends on the volume of the bowl (see the relevant paragraph): for example, for a 1.5 kg bowl, at least 300 W is desirable, for a two-kilogram bowl — 400 W, a three-kilogram bowl — at least 700 W. And with the same bowl capacity, a more powerful unit will be more productive, it will work faster and better cope with high loads (for example, a full load). On the other hand, an increase in power affects energy consumption and price.

Max. revolutions

The maximum speed of rotation of the working attachment of the food processor. The higher the rotation speed, the more solid products can be processed in a food processor, and the less (in some cases) the time to complete the desired procedure.

Smooth speed control

A control that allows you to smoothly change the speed of rotation of the food processor engine — for more precise adjustment of speed and setting the optimal mode for different products. With stepwise speed control, a situation may arise when a higher speed value is already too high, and a lower speed is not yet enough. Smooth control avoids such situations.

Body material

The main material used for the body of the unit.

Plastic. The main advantage of plastic is the relatively low cost. In addition, this material can have almost any colour, including quite bright ones. In terms of strength and reliability, the plastic is inferior to metal, but this difference does not play a special role in normal use, it becomes noticeable only in various emergency situations (during falls, overheating, etc.). Also, plastic bodies are relatively easy to scratch, but this point mainly affects the appearance of the unit and does not affect the functionality. In light of all this, only plastic is the most popular material for the bodies of modern food processors.

Metal. Metal bodies are distinguished by their solid appearance and high strength. On the other hand, this material is noticeably more expensive than plastic, and therefore is less common — mainly in middle and high class food processors.
FIRST Austria FA-5259-3 often compared
FIRST Austria FA-5259 often compared