Comparison Tefal Juice & Clean ZC 420 vs Braun MultiQuick 7 J700

— Citrus juicers operate through a special rotating nozzle with a conical shape with a ribbed surface. In order to extract juice using this type of nozzle, the user must place a halved fruit with the pulp side down and apply pressure using either their hand or a provided clamping mechanism (see Pressing mechanism). The juice is then extracted through the grate-filter and collected in a bowl below, while the peel remains intact. Some models may also have a reverse mode (see Reverse) to optimize the juicing process. Typically, citrus juicers have lower power and capacity compared to other types of juicers.

— Centrifugal, or universal juicers allow you to get juice from almost any fruit, berry or vegetable. The process in centrifugal juicers starts with grinding the produce into a uniform mixture using a grater, which is then directed to the separator. The separator applies centrifugal force to the mixture, causing it to press against a filter, separating the juice from the pulp or cake.

— Screw. Auger juicers use a rotating cylinder with spiral ribs, which is the primary mechanism for extracting juice, similar to meat grinders. They are versatile and can extract juice from almost any fruit, berry, and vegetable. Because of their low speed of rotation, they consume less energy compared to centrifugal juicers. Some manufacturers claim that auger juicers separ...ate juice from the cake more efficiently, resulting in drier cake and more homogeneous juice. Despite this, they are typically more expensive than centrifugal juicers.

— Combined juicers combine elements of a citrus and centrifugal/auger juicer and allow you to get juice from both citrus fruits and other fruits and berries. However, it is believed that such juicers work less efficiently than specialized devices.

The volume of the built-in or freestanding juice tank (see Juice capacity). It is usually in the range from 0.2 to 2 liters. Doing more volumes, usually, does not make sense — freshly squeezed juice is considered the most useful, and it quickly loses its properties. Therefore, the best option is to prepare small portions of juice up to 1 liter, with the expectation that you can drink it right away. On the other hand, for the preparation of canned juices, a tank volume of 1.5 – 2 liters is usually quite enough.

The volume of the tank for the oil cake (pressed pulp) installed in the juicer.

While most models with a pulp tank come equipped with an automatic pulp ejection function (see "Functions"), there are some exceptions. Nevertheless, the size of the tank directly affects the duration for which the juicer can be used without having to empty the oil cake residue. However, an increase in capacity significantly impacts the device's dimensions, weight, and cost.

Modern juicers are designed with oil cake containers ranging from 200-500 mL in the most compact models to 3 liters or more in larger ones. The specific capacity is usually chosen by designers based on the unit's total power and performance. However, models with similar performance characteristics may differ in their oil cake container volume. When selecting a juicer, it's important to consider the intended use of the device. For occasional home use, a smaller container may suffice, but for a cafe or bar where freshly squeezed juices are prepared regularly, a larger capacity juicer may be the better option.

The power of the juicer depends on its type. For example, the power of citrus juicers rarely exceeds 40 W, since the structure of citrus fruits is easily destroyed and does not require serious effort to extract juice. The power of centrifugal juicers can even exceed 1000 W. The centrifugal speed and spin features depend on the power of the centrifugal juicer (for more details, see Number of speeds)

Juicer control panel design.

— Control knob. Mechanical control is carried out using rotary knobs and switches. Most parameters in such devices are set and controlled manually. In this case, the control elements are connected to the working parts of the juicer directly, without additional electronic circuits. This option is simple, reliable and low cost; True, it is only suitable for the most basic functions, but juicers usually do not require more than that.

– Push-button. Push-button control is based on electronic circuits. Such systems are more accurate than mechanical ones; more capabilities and modes are provided. On the other hand, such control is more complex and more expensive than mechanical control.

– Touch. A type of electronic control with touch switches. Compared to push-button models, it provides a high level of comfort in operation, and looks more modern and aesthetically pleasing. Touch control is found mainly in top models of juicers.

The number of speeds of the juicer. The optimal working speeds for different fruits are different: for example, soft fruits and vegetables need to be pressed at low speeds, solid ones (for example, carrots) — at maximum. In addition, the amount of pulp in the juice depends on the extraction speed: at high speeds it is more, at low speeds the juice is light.

The number of speeds provided by the design of the juicer can vary from 1 to 9. The more speeds, the easier it is to choose the optimal mode for each specific case.

The maximum rotation speed of the working tool is centrifuges in juicers, conical nozzles in citrus juicers. The higher the maximum speed, the more solid products can be processed in the device (this applies primarily to centrifugal juicers). At the same time, for soft products, a high rotation speed is not always suitable, as it leads to the ingress of an excessive amount of pulp into the juice. The perfect option is to have a speed control in the juicer (see Number of speeds).

The ability to rotate the working tool of the juicer alternately in different directions. It is believed that this provides a better spin quality than during rotating in one direction; in addition, the reverse can be useful in case of jamming of the nozzle. It is found mainly in models of auger design, as well as in devices for citrus fruits (see "Type").

The width of the opening for loading products into the centrifugal juicer. You should pay attention to this parameter if you plan to get juice from large fruits such as apples or pears — if the opening is less than 70 mm wide, the fruits will most likely have to be cut into pieces.