Volume
The working volume of the pool is the amount of water that is standardly contained by the product.
Usually, the working volume is indicated based on the occupancy of the pool at 80% of the maximum capacity. With such a fullness, there will be enough water inside for normal use and at the same time it will not overflow when the next person is immersed in the pool or when waves occur.
The capacity of the pool directly depends on the volume: the larger the tank, the more people will be able to swim in it at the same time. In addition, more capacious models are often also
deeper. On the other hand, a large capacity correspondingly affects the cost and puts forward increased requirements for additional equipment: a powerful pump, a performant filter, an efficient drain system, etc. are needed. Accordingly, it does not always make sense to chase large volumes.
In addition, it is worth noting that products with the same volume can differ markedly in size and, moreover, in shape. So in fact, the volume often turns out to be a secondary parameter, and it is easier to choose a pool in terms of length-width-depth.
Performance
Performance of the pump supplied with the pool (see above).
It refers to the amount of water that the unit can pump per hour. Knowing this amount and the volume of the pool (see above), you can estimate how long it will take to filter it.
Note that manufacturers usually choose the performance of a complete filter, based on the optimal compromise between good speed and low cost, as well as the weight of the unit itself. Therefore, in fact, this parameter may be required mainly in the case of searching for a replacement for the standard filter.
Dimensions
General dimensions of the pool in the unfolded position. In general, this is a fairly obvious parameter; we note only a couple of important points:
— In the largest models, the length or size can
exceed 6 m, in the smallest models it does not even reach 2 m.
— It is worth keeping in mind that a frame pool should be filled with water no more than 80%. Accordingly, the maximum depth of such a structure will not exceed 80% of the total height. For example, the category of
deep frame pools usually includes products with a height of more than 130 cm - accordingly, the working depth in such models is slightly more than 1 m (130 * 0.8 = 104 cm). And for the younger generation, children's's
frame pools are provided, with a side height of up to 60 cm (and a water depth of about 50 cm, respectively)
