Other Sound & Hi-Fi

The NEWlink power extension blocks are perfect for home and office use and have a 2 3 5 or 10 metre cable to provide power to work stations and any home or office equipment that uses a standard UK plu more→g.

The surge protected models provide better protection to electrical equipment by protecting against voltage spikes. The sockets are individually switched allowing greater control.

- Individually switched
- Surge protection status LED
- HO5VV-F 3G 1.25mm2 cable
- 13Amp
- White

The NEWlink power extension blocks are perfect for home or office use they have various lengths sockets and are either surge protected or non surge protected.

- Surge protection status more→LED
- White

- 50 Microns Pack of 100
- Gold pins
- 2 Prongs on pins
- Unshielded

Canon 3851V818 staple remover Paper

Canon Carrying Case for the imageFORMULA P-150 High Speed Scanner.

Compatibility:

-- imageFORMULA P-150
-- imageFORMULA P-150M

Patch Code Decoder for DR-G1 Series

Exchange Roller Kit For A4 (Sf400 & M260)

Canon EW-60E Black

Canon Exchange Roller Kit

User-Replaceable Exchange Roller Kits Are A Recommended Purchase For Periodic Unit Maintenance. This Roller Is Compatible With The Dr-6010C/4010C.

Canon Easy Service Plan Installation service

Canon 4623B001AA

With the constant addition of very 'power hungry' digital pedals on the market, Carl Martin designed the DC Factory to address that very need. Highly powered and totally noise free, the DC Factory doe more→sn't take up too much real estate on your pedalboard and literally weighs about 2/3 of a kilogram (1.5 lbs). To meet these goals, they had to forget about the standard toroidal transformers and design a fully digital switch mode power supply! The benefits go beyond ample power, the size and weight are reduced and most importantly, there is no radiation of hum to Wah pedals or certain analog drive pedals.
Colour: Black
Current (mA): 500.0
Number of Outputs: more than 8
Power Supply: 240V
Depth (mm): …

The Casio AD-A12150LW power supply is suitable for a wide range of portable keyboards from Casio. The lightweight construction of the AD-A12150LW power supply enables it to be transported easily while more→the matte black colour keeps it hidden from sight. Please see below for all compatible Casio products - please check your owners manual.

Hear every high frequency within your sound. The Celestion CDX1-1010 compression driver has a 1 copper-clad aluminium voice coil with a ferrite magnet. Designed to deliver pristine highs that compleme more→nt well-defined low frequencies. Guaranteed to project your sound without sacrificing the quality. The CDX1-1010 has a nominal impedance of 8 ohms and is capable of handling 15 watts of continuous power. Installation is quick and simple - the driver just screws into the speaker enclosure. If youre looking to replace a blown tweeter or improve the sonic ability of your loudspeaker the Celestion CDX1-1010 is the perfect choice.

Hear every high frequency within your sound. The Celestion CDX1-1070 compression driver has a 1 copper-clad aluminium voice coil with a ferrite magnet. Guaranteed to project your sound without sacrifi more→cing the quality. Designed to deliver pristine highs that complement well-defined low frequencies. The CDX1-1070 has a nominal impedance of 8 ohms and is capable of handling 12 watts of continuous power. If youre looking to replace a blown tweeter or improve the sonic ability of your loudspeaker the Celestion CDX1-1070 is the perfect choice.

Hear every detail within the high frequencies of your sound. The Celestion CDX1-1430 compression driver has a 1.4 copper-clad aluminium voice coil with a neodymium magnet. Delivering an extended frequ more→ency response with detail and definition. Guaranteed to project your sound. Every delicate nuance is faithfully reproduced - from the crystal-clear highs to the well-defined midrange. The CDX1-1430 has a nominal impedance of 8 ohms and is capable of handling 50 watts of continuous power. If youre looking to replace a blown tweeter or improve the sonic ability of your loudspeaker the Celestion CDX1-1430 is the perfect choice.

1" exit neodymium magnet compression driver.Maximum modal suppression phase plugDeep-drawn titanium diaphragm with polyamide surround1,500Hz recommended min. crossover freq (12dB/oct)
Sensitivit more→y: 107 dB
Magnet Type: Neodymium
Power (Watt): 100.0
Diameter (inch): 1.0
Power RMS: 50 W
Type: PA
Diameter: 1"
Impedance: 8 Ohm
Made in: China
Power RMS (Watt): 50.0
Power: 100 W
Weight: 0,75 kg
Frequency Range: 800 Hz - 20 kHz

CDX1-1730 features a neodymium magnet, which results in a reliable and high quality HF compression driver with a massive 70% reduction in weight compared to a ferrite device with the same output. Prov more→iding 80 W continuous power handling (40 W RMS AES standard) and 110 dB sensitivity. CDX1-1730 features Celestion’s proprietary Sound Castle clamping system for greatly reduced distortion and increased lifespan.
Magnet Type: Neodymium
Power: 100 W
Power RMS: 50 W
Frequency Range: 2000 Hz - 20 kHz
Power RMS (Watt): 50.0
Made in: China
Weight: 0,6 kg
Type: PA
Diameter (inch): 1.0
Power (Watt): 100.0
Impedance: 8 Ohm
Sensitivity: 108 dB
Diameter: 1"…

Superb design and high build quality makes this well-established ferrite magnet compression driver ultra-reliable. Ideal as a drop-in replacement HF driver used with two-way and three-way cabs, CDX1-1 more→745 provides 80 W continuous power handling (40W RMS AES standard) and 110 dB sensitivity. Features Celestion’s proprietary Sound Castle clamping system for greatly reduced distortion and increased lifespan.
Impedance: 16 Ohm
Weight: 3,0 kg
Made in: China
Sensitivity: 110 dB
Power RMS (Watt): 40.0
Power: 80 W
Frequency Range: 1200 Hz - 20 kHz
Type: PA
Diameter (inch): 1.0
Power (Watt): 80.0
Diameter: 1"
Magnet Type: Ferrite
Power RMS: 40 W…

1” exit, ferrite magnet compression driver with 1.75” edge-wound copper clad aluminium voice coil and one-piece PETP diaphragm and surround that provides 40W RMS power handling (AES standard) and 110d more→B sensitivity. It features the Sound Castle clamping, which ensures even pressure on diaphragm assembly for reduced distortion. The Finite Element Analysis (FEA) is used to optimise both magnet assembly and acoustic design. Nominal impedance: 8 Ohm. Frequency range: 1.2-20 kHz. Unit weight: 3 kg.
Power RMS: 40 W;20 W
Diameter: 1"
Power (Watt): 80.0
Frequency Range: 1200 Hz - 20 kHz
Made in: China
Power: 40 W;80 W
Magnet Type: Ferrite
Diameter (inch): 1.0
Type: PA
Impedance: 8 Ohm
Weight: 3,0 kg…

1" exit neodymium magnet compression driver.2,200 Hz recommended min. crossover freq (12 dB/oct)Single piece PETP film diaphragm and surroundSound Castle diaphragm assemblyScrew fitting
Power: 8 more→0 W
Diameter: 1"
Type: PA
Made in: China
Power (Watt): 80.0
Power RMS: 40 W
Frequency Range: 1200 Hz - 20 kHz
Impedance: 8 Ohm
Magnet Type: Neodymium
Diameter (inch): 1.0
Weight: 0,75 kg
Power RMS (Watt): 40.0
Sensitivity: 110 dB

Hear every detail within the high frequencies of your sound. The Celestion CDX14-3040 compression driver has a 3 copper-clad aluminium voice coil with a neodymium magnet. Delivering an extended freque more→ncy response with detail and definition. Guaranteed to project your sound. Every delicate nuance is faithfully reproduced - from the crystal-clear highs to the well-defined midrange. The CDX14-3040 has a nominal impedance of 8 ohms and is capable of handling 75 watts of continuous power. If youre looking to replace a blown tweeter or improve the sonic ability of your loudspeaker the Celestion CDX14-3040 is the perfect choice.

10", cast aluminium chassis, ferrite magnet mid/bass driver. Balanced airflow venting provides enhanced cooling. Twin demodulation rings.
Diameter: 10"
Impedance: 8 Ohm
Weight: 5,5 k more→g
Magnet Type: Ferrite
Power RMS: 300 W
Diameter (inch): 10.0
Frequency Range: 60 Hz - 5 kHz
Sensitivity: 99 dB
Made in: China
Type: Speaker unit
Power (Watt): 600.0
Power: 600 W
Power RMS (Watt): 300.0