Diving Accessories Apeks

Regulators - Spare parts.Heat Exchanger PVD XTX100 Second Stage.

APEKSFlexyhose 3/825 cm

Specific hose to APEKS FLIGHT regulator, with quick connect. All LP hoses and Inflator hoses are manufactured at the Apeks factory..

Useful for upgrades & replacements for your existing worn regulator hoses. Offering tougher, lighter options, perfect for your scuba diving equipment.The hose material itself features an external nylon safety braiding designed to resist snagging and abrasion. The double braiding resists UV rays out of the water, thus extending the life of the hose. The hose is lightweight and extremely flexible but is also strong with a burst pressure more than twice that of most traditional hoses. It is kink-resistant. Even if the hose were tied in a knot the gas flow would remain unobstructed. The fittings are the same as Apeks standard hose fittings and made to a high standard.

Specifications:- Set of screw 3/4 X 2

All LP hoses and Inflator hoses are manufactured at the Apeks factory.Lightweight flexible hoses withstand a burst pressure more than twice that of traditional.hoses.Seatec inflator hose fits all Aqualung BCs.

Regulators - Spare parts.XTX Tungsten Front Cover Second Stage.

Apeks inflatorhose

The Apeks Bungee Compass is a wrist mounted compass. An elasticated strap will hold it securely in place even when your wetsuit or drysuit compresses at depth.

Regulators - Spare parts.4 Port Body DS4 First Stage.

Make sure you're seen first time, every time, with the Apeks Surface Marker Buoy. Easily the most feature rich SMB on the market today, a unique fully closed system oral inflator allows the buoy to be fully inflated on a single breath, meaning fast deployment in any situation. Both sides of the SMB have high quality SOLAS reflective tape panels to ensure maximum visibility.Not only is the Apeks SMB the perfect surface marker buoy, it can also be used as an emergency float. Brass eyelets at the ends of the float allow the diver to fold the unit and secure it into a floating loop using bolt snaps.Features:- Unique oral inflation valve allows for easy one handed operation in cold water.- 2 stainless …

APEKS octopus yellow hose 3/8 1M All LP hoses and Inflator hoses are manufactured at the Apeks factory.Lightweight flexible hoses withstand a burst pressure more than twice that of traditional.hoses.

APEKS octopus yellow hose 3/8 1M All LP hoses and Inflator hoses are manufactured at the Apeks factory.Lightweight flexible hoses withstand a burst pressure more than twice that of traditional.hoses.

Regulators - Spare parts.Second Stage Case.

Flexible MP (LP) Apeks hose ( second stage).The hose for the DST has a 1/2´ port for the DST series before 2007.The other hose has a 3/8´ standard port.

Make sure you're seen first time, every time, with the Apeks Surface Marker Buoy. Easily the most feature rich SMB on the market today, a unique fully closed system oral inflator allows the buoy to be fully inflated on a single breath, meaning fast deployment in any situation. Both sides of the SMB have high quality SOLAS reflective tape panels to ensure maximum visibility.Not only is the Apeks SMB the perfect surface marker buoy, it can also be used as an emergency float. Brass eyelets at the ends of the float allow the diver to fold the unit and secure it into a floating loop using bolt snaps.Features:- Unique oral inflation valve allows for easy one handed operation in cold water.- 2 stainless …

The 2-gauge console combines a submersible pressure (contents) gauge and a depth gauge housed in a specially designed case.The unit is completed with a high pressure hose.The gauge case is made from nickel plated brass.The dial window is made of highly shock resistant material (anti-splinter polycarbonate).A specially designed housing protects the gauge and HP hose fitting from accidental damage.A large loop area designed into the housing allows for easy attachment.There is an over-pressure capsule fitted in the back of the module to prevent the screen from exploding in the unlikely event of the internal mechanism failing.Dials have a long phosphorescent effect for better reading in poor visibility …

The WTX and WTX-D Series is a selection of harnesses, buoyancy cells and accessories which offer unparalleled versatility due to the modular nature of the whole system. Each component can be configured into a highly technical rig for those trained to push the limits, or scaled down to make a travel friendly set up suitable for any diver. This unique accessory allows you to mount the SureLock™ Weight System (Patented) directly to the back plate.Features:- Includes necessary attachment hardware plus spares.- May be used without the SureLock™ Weight System to spread the weight of the cylinders over the hips.- 3 different grommet settings allow for proper positioning of the SureLock™ weight pocket…

Flexi 1/2´´ Hose for a regulator.

Nitrox M26 DIN handwheel.Chrome

Powerline inflation system for Black Ice BCD.

Apeks new, very accurate pressure (contents) gauge, with an internal Bourdon pressure measuring mechanism, gives you clear information on the gas contents of your cylinder. The gauge indicates the cylinder bottle pressure and the dial range is from zero to 300 bar. The dial face is designed with clarity in mind. Uncluttered, with large black figures on a luminous background giving a long phosphorescent effect. This makes viewing as easy as possible, even in poor visibility conditions.All our gauges are made with O2 compatible materials but ensure that they are O2 cleaned before used for Nitrox.The slim-line gauge case is made from nickel plated brass and is complimented by a specially designed …

The Apeks TEK gauge is a high quality chrome plated Submersible Pressure Gauge (SPG) with a black face to help reduce glare and topreserve night vision in low light environments.Features:- High quality chrome plated SPG:- Black faced SPG with luminescent numbers and hand that glows in the dark when charged with a light.- The black face helps reduce glare and preserve night vision in low light environments i.e. inside a cave or wreck.- Tempered glass faceSpecifications:- 520mm / 2 diameter face- In metric and imperial- 65 cm hose.- 360 bar / – 5000 psi scale- Max working pressure 300 Bar/4350 psi

Airway Complete Inflator K with Emptying Valve for Wing WTX-D and PSD.Apeks offers a selection of airways that are the same as found on their BC and wings models. These models are time-proven to be rugged and reliable.Features:Apeks Powerline (as found on Black Ice) – 18 inch overall length:- The inflator hose attaches to integrated hose clips- Cable-activated rapid exhaust at the top, simply pull down on lower unit to dump airApeks WTX Airway Complete – 21 inch overall length:- Rugged K inflator with solid brass buttons- Elliptical hose for lower profile and less drag- An internal safety cable prevents hose from being hyperextended- Simple 90° elbow at the topApeks WTX Airway Complete - 23 …