Other Sound & Hi-Fi ART

The Art SCL2 Dual Stereo Compressor Limiter Expander and Gate is a professional and versatile dynamic processing unit for both live and studio outboard racks that has the ability to add huge amounts of compression subtle volume limiting and noise gating with variable controls such as the adjustable attack release and selectable hard and soft attack. Also featuring precise LED volume and gain reduction meters an auto mode for the compressors attack and release and with the ability to be used as a dual stereo channel unit or mono individual channels the Art SCL2 is a must have outboard unit.

Passive noise eliminator. This device easily removes noise without any signal degradation. It has balanced and unbalanced 6.35 mm TRS inputs and outputs. Frequency response: 10 Hz - 50 kHz. Dimensions: 114 x 73 x 38 mm. Weight: 0.4 kg
Made in: China
Type: Noise Reducer
UK/EU Power supply included: No

The ART CleanBox Pro is a handy tool for live DJs studio engineers and more to convert two channels of unbalanced line-level to unbalanced consumer-level. Housed in a rugged portable and all-aluminium housing the ART CleanBox Pro is the ideal solution for transporting between gigs for your DJ equipment live PA equipment or even to take between studios for recording sessions. By converting your unbalanced signals to a balanced signal you can expect a greater immunity to external noise hum and interference within your signal giving you a much cleaner audio source to work with. In the studio environment this can help to achieve more professional sounding recordings that are free from unwanted extraneous …

dimensions 44.5mm x 107mm x 89mm, Input Connections: XLR female balanced, unbalanced, and RCA type phono jacks, Output Connection: XLR male balanced, thereby isolating two systems and reducing hum and groundloop noise. The DTI's audio transformers have an extremely flat and wide frequency response and can handle high signal levels while maintaining an isolated balanced output. This gives the DTI a very clean and neutral sound with a wide variety of signal sources. The transformers are wound for 1:1 unity gain and are designed to be used with impedances from 600 Ohms to 100 kOhms, totally passive audio interface that uses a pair of high performance transformers to totally separate input and output …

Dual reamping direct box. The Dual RDB is the ideal interface solution for any application where stereo or dual line level signals from recording interfaces, computers, mixers, iPods, consumer audio or video machines need to be connected to XLR microphone or 6,35 mm instrument level inputs. The unit has two high quality isolation transformers that prevent ground loops when connecting various systems together. Frequency response is 20 Hz - 20 kHz. Dimensions: 47 x 117 x 99 mm. Weight: 0,40 kg.
UK/EU Power supply included: No
Number of Outputs: 4
Number of Input Ports: 4
Rackmountable: No
Type: DI Box;Splitter;Ampbox
Made in: China

The DUALZDirect provides two independent high quality totally passive interfaces that let you connect instrument, line, or speaker level signals to a mixer or other balanced inputs through high performance audio isolation transformers. Each of the high impedance single-ended 1/4″ inputs is converted by a transformer into an isolated, balanced, low impedance signal output. The DUALZDirect’s audio transformers have an extremely flat and wide frequency response and can handle high signal levels. This gives the DUALZDirect a very clean and neutral sound with a wide variety of signal sources and over long signal runs in high noise environments.
Number of Outputs: 4
Type: DI Box
Rackmountable: No…

The ART EQ341 - Dual 15 Band EQ utilises active filter sections with constant-Q filtering complete with precise potentiometers that allow you to control each band with the utmost accuracy. Constant-Q filtering helps to differentiate between the 15 bands on offer preventing any unwanted crossover for clean and precise processing. Ideal for both studio and live applications the EQ341 allows you to mix and shape your sound with confidence. Equipped with 20mm precision slide potentiometers (with centre-detented design) the faders are graphically positioned on the ISO centre frequencies ranging between 25Hz and 16kHz. Using high-quality components results in enhanced tonal character and sonic accuracy …

Signal Processor / 19 Inch Size / Processor Type Graphic EQ / Number of Channels 1 / Rack Height 1 RU

Patch panel. Ideal for any live PA rack, studio rack or fixed installation where easy access to XLR inputs are required, the P16 brings all rear-mounted XLR inputs from various devices to one, convenient single space rackmountable location. The P16 saves wear and tear on the connectors of expensive audio equipment by bringing all commonly used connections to the external patch bay. All-steel chassis, black anodized finish and secure, high-quality XLR connections front and back with internal connections made via PCB wiring ensure long term reliability from the passive ART P-16 Balanced XLR rackmount patch bay.
Type: Patch Panel
Made in: China
Power Supply: 240V
UK/EU Power supply included: Yes<&hellip;

The voltage stabilizer with a capacity of 1800 W and a solid steel construction. It has RFI and EMI filters and a built-in Surge and Spike Protection system designed to protect the powered device. On the front panel there is a 15 A circuit breaker, switch and backlit input voltage meter. There are 8 outputs on the rear panel, of which 4 are at a sufficient distance to connect wide electrical cables, and auxiliary lighting on the gooseneck stand. Dimensions: 483 x 203 x 44 mm. Weight: 2.2 kg.
Type: Power Conditioner
Power Supply: 240V
UK/EU Power supply included: Yes
Made in: China

DI Box / Desktop / Number of Channels 1

Microphone Pre-Amp / Desktop / Number of Channels 2

The ART Pro VLA II Two compressor has been designed to be used in any professional audio environment with its superior performance and tone it is the ideal tool for the studio. The Pro VLA II is the perfect unit for mixing mastering dynamic control of live sound sources or for use in broadcast audio. The VLA II is capable of delivering a far more musical natural sounding and sonically transparent compression than competitive units in its class

The ART S8 can be used to split eight balanced low impedance microphone signals into sixteen balanced low impedance microphone signals. Each channel of the S8 provides one direct output and one transformer isolated output from a single microphone. The S8 includes a ground-lift switch on each isolated output to reduce noise due to ground loops between connected equipment. Frequency response is 20 Hz - 20 kHz. Dimensions: 531 x 178 x 89 mm. Weight: 1,9 kg.
Made in: China
Type: Splitter
UK/EU Power supply included: No

The ART Solo MPA is ideal for recording enthusiasts who value simplicity with versatile control. This single-channel rackmount multi-voice tube preamp is designed to enhance your audio projects by providing both a solid-state and a class-A vacuum tube gain stage allowing you to choose between clarity or warm saturation. Its blend control offers parallel compression seamlessly merging dry and processed signals to maintain natural dynamics while enhancing fullness and sustain. Additionally the unit features variable attack and release controls enabling precise manipulation of compression dynamics. This preamp supports a broad frequency response from 20Hz to 80kHz ensuring high fidelity across …

Sound processor, microphone splitter. Use the SPLITCom Pro to Split or Combine balanced low impedance microphone signals. As a Splitter: The SPLITCom Pro provides one direct-coupled output and one isolated output from single microphone. Applications include sending the direct output to the main or FOH mixer, and the second isolated output to a monitor or recording mixer. The MAIN MIC OUTPUT passes phantom power from the main mixer to the MAIN MIC INPUT for use with condenser microphones. Phantom power is blocked from passing to the ISOLATED MIC OUTPUT. AS A COMBINER: The SPLITCom Pro provides one output from two microphone inputs. The PHASE switch can be used to invert the relative phase of …

Fourchannel fully passive hybrid mixer/splitter with 4 stereo input channels and 1 stereo output that offers a wide variety of configurations: it allows mixing of 4 stereo input channels down to 1 stereo output, splitting a stereo input signal to distribute 4 stereo output channels, or combining of the configurations for a wide range of applications. It can even be configured as 4 stereo input channels thru independent level attenuators to 4 stereo output channels. All 1/4" connections are stereo TRS and have intelligent switching. Mixer also provides stereo level control on each channel, while level attenuators offer over 90 dB of attenuation and channel isolation. Stereo or mono operation …

The ART VoiceChannel is a tube based channel strip which features both analog and digital outs. It is ideal for situations where high-quality sound is integral - such as broadcast or vocal recording. It is designed to deliver professional results easily. With a Class-A tube mic preamp for a full and natural sound. The VoiceChannel has a deep feature-set too - featuring dynamics control De-Esser expander and semi-parametric EQ in a single rack-mountable unit.

USB microphone cable. The ART XConnect USB Microphone Cable provides an easy way to directly connect any dynamic microphone to your computer's USB port for convenient recording without any extra equipment. The output of the XConnect is a studio quality 16-bit, 44.1 kHz or 48 kHz digital audio signal. No special drivers are required, just ''plug and play'' with your Windows PC or Mac. Frequency response: 20 Hz - 19 kHz. Length: 3 m. Weight: 0,22 kg.
Analogue Inputs: No
ADAT: No
Microphone Input: 1
AES/EBU: No
Ethernet: No
Line Inputs: No
Line Output: No
Weight: 0,22 kg
Word Clock: No
MIDI Interface: No
Number of Channels: 1
Headphone Output: No
Rackmountable: No
S/PDIF: No
Made in: China
Instrument …