Car Subwoofers

Inserts slugly into Gen-2 P3S trim rings. Protects against surround and cone damage. Sized to fit Gen-2 P3S woofers

Optimally blended pulp cone reproduces natural sound with a smooth frequency response Rubber surround supports the linear movement while reducing unwanted resonance Powerful strontium magnet precisely drives the cone and delivers clear sound Wide sound dispersion expands the listening sweet spot Unique fixture provides flexible mounting options, designed to fit a variety of locations

Kenwood KFC-W3041 (Single) + Gravity Magnet Phone Holder Bundle Subwoofer Type: 12 inch PP Cone Peak Power: 2000 W (300 W RMS) Frequency Response: 29Hz-300Hz Impedance: 4 ohms / Mounting Depth: 5-3/8 inch

Boxed Subwoofer / Diameter 203 mm / 8 Inch / 240 watt / Nominal Load 120 Watt

Space Saver - The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. With a slim design, there are a few installation options. Embrace the Bass. Built-in Amplifier - A built-in 800 Max watt amplifier powers the subwoofer Pulse Width Modulated - This design controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. It increases efficiency, is lighter, smaller reliable Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily …

Premium low-frequency sound suited for the marine environment Water-resistant connectors for simplified installation and superior protection Rigorously tested marinized design with IP65 rating (Dust-tight. protected against low-pressure jets of water) Designed to optimally work with Fusion stereo systems and amplifiers (sold separately) with custom DSP profiles International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.

Protect your investment with the stylish and tough KTE-8G grille for 8" Alpine Type-R subwoofers. Brand: Alpine Model number: KTE-8G

Affordable big-bass performance - without taking up lots of room in your trunk or cargo area. Tough as nails. Load your cargo right on top of the sub for extra space – with plenty of bass! Full perimeter venting and UniPlate back plate and pole piece Stiff, injection-molded cone with 360-degree back bracing Utilizes extensive internal bracing, thick MDF construction and custom embroidery

Protect your sound investment with these stylish grilles from Kicker. Works for Kicker CompR 12" Subwoofers Covers screws for a sleeker, cleaner install.

Boxed Subwoofer / Nominal Load 300 Watt / Impedance 4 Ohm

Boss Audio Systems BX-10 Subwoofer Ripper Series 350 RMS, 700 Watt max. Factory packaging

SSI (Selectable Smart Impedance): the exclusive dual impedance switch allows a variety of system configurations when one or more subwoofers are used International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.

Car Subwoofer Speaker / Diameter 300 mm / Mounting Depth 115 mm / 300 watt / Nominal Load 200 Watt / 94 dB / Impedance 8 Ohm

SWT-10S4 - Alpine 10" 350W RMS Single 4-Ohm Truck Subwoofer 10" truck subwoofer with 4-ohm voice coil Power handling: 350 watts RMS (1000 watts peak) Frequency response: 30-200 Hz Mounting depth: 4-3/16"

BUILT-IN AMPLIFIER: A built-in 1200 Max watt amplifier powers the subwoofer PULSE WIDTH MODULATED: This design controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. It increases efficiency, is lighter, smaller reliable VARIABLE LOW-PASS FILTER: A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s) HIGH LEVEL INPUTS: Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BAB10 to your factory radio or an …

Membrane diameter: 165 mm Capacity: 180/90 Watt RMS/Max Impedance: 4ohm Mounting Depth: 63 mm

Inserts slugly into Gen-2 P3S trim rings. Protects against surround and cone damage. Sized to fit Gen-2 P3S woofers

Power Range: 100W - 350W RMS Power Handling: 350 Watts Peak Power Handling: 1000 Watts Frequency Response: 30Hz - 200Hz Material: Poly-Mica Dust Cap & Pulp-Kevlar

On b W O or fe R 40hz-400hz Rear High Pass 50hz-1.5Khz Front high pass 50hz-7.5Khz.

30 cm marine subwoofer. load capacity: 200 watts rms / 400 watts max. Impedance: 4 + 4 Ohm. Fs 28.5 Hz, Qts 0.59, VAS 107.7 litres. Sound pressure: 89 dB. Xmax: 7 mm. Black grid. Polypropylene membrane with UV protection, black. Aramid fibre resistant to moisture, cracks, wear and tear. Can be used in closed, bass reflex or free air. Installation depth: 122 mm. Installation opening: 2 mm. 76 mm.

Diameter 250 mm / 10 Inch / 360 watt / Nominal Load 150 Watt / Impedance 4 Ohm