Turntable Cartridges Audio-Technica

Audio Technica Angled Headshell for Straight Tonearm Black AT-HS4BK290524

Delivery: in United Kingdom

Report

Stylus / Output Voltage 5.3 mV

28.00Buy!
£

Delivery: in United Kingdom

Report

The Audio Technica Angled Headshell features a universal 0.5-inch mount that will enhance the playback quality of your turntable. This headshell has been crafted specifically for use with straight 4-p more→in tonearms offering a synergy of design and function. Weighing just 8.5 g the ultra-lightweight aluminium die-cast body keeps vibration to a minimum delivering a clean vinyl sound. Built for your convenience the stylish finger lift enables accurate stylus placement so you can switch between songs with ease. It also comes complete with colour-coded lead wires and mounting screws facilitating a hassle-free installation process. Additionally the Audio Technica Angled Headshell is also available in …

Audio-Technica AT33EV

from £389.00 up to £445.00

Audio-Technica Audio Technica AT33MONO Moving Coil Cartridge AT33MONO280524

The half-inch standard mount 0.3 x 0.7 mil elliptical AT33EV cartridge features a tapered duralumin cantilever. Dual Moving Coil cartridge design increases channel separation and extends the frequency more→response range delivering extraordinary audio quality. Internally constructed with neodymium magnet for enhanced magnetic energy and PCOCC wire for pure audio transmission.
Type: Dual Moving Coil
Stylus tip radius: 0,3 x 0,7 mil
Tracking force recommended: 2 g
Frequency Range: 15 Hz - 50 kHz
Voltage: 0.3mV (1kHz and 5cm/sec.)
Made in: Japan
Shape: Elliptical
Package Contents: Lead Wire Set;Brush;Cartridge Installation Screw;Screwdriver;Protector;Nut;Washer
Material: Aluminium;Duralin;Synthetic …

299.00Buy!
£

Audio-Technica Audio Technica AT33PTGII Moving Coil Cartridge AT33PTGII280524

Delivery: in United Kingdom

Report

The Audio Technica AT33Mono is made specifically for use on mono systems. It has a horizontal coil and so in principle only generates electricity horizontally. The Audio Technica AT33Mono produces sou more→nd to a very high quality because it does not easily pick up unnecessary strain components from distorted or scratched records producing audio that you couldn possibly get from a stereo cartridge.

from £498.00 up to £509.99

Audio-Technica Audio Technica AT33SA Moving Coil Cartridge w/ Shibata Stylus AT33SA280524

The Audio Technica AT33PTGII Moving Coil Cartridge utilises a Microlinear stylus creating a quality sound with low distortion. Supported by the 23-degree vertical tracking angle the Microlinear stylus more→ensures optimal record tracking to capture an audio quality thats as close to the original recording as possible. The advanced tapered boron cantilever offers a reduced coil weight helping to reduce unnecessary vibrations and create a thrilling listening experience. With a dual-moving coil design the AT33PTGII offers a clear distinction between left and right audio channels. This creates a vivid stereo image and extends the frequent response to bring more detail to the sound output. A neodymium …

from £659.00 up to £679.99

The Audio Technica AT33SA Moving Coil Cartridge with Shibata Stylus provides a tapered boron cantilever enabling a superior vinyl sound. This cantilever construction coupled with a double damper provi more→des a reduced weight to offer a wide 15 - 50000Hz bandwidth 30dB channel separation and minimised distortion for clear sound reproduction. Mounted onto the cantilever the Shibata stylus utilises its line-contact design to accurately track your records with exceptional precision. The AT33SA also offers a 23-degree vertical tracking angle and a 1.8 to 2.2 g vertical tracking force ensuring a ground-breaking mid/bass sound. For further audio enhancement the AT33SA boasts a supreme neodymium magnet …

Audio-Technica AT81CP

from £25.00 up to £25.99

Audio-Technica Audio Technica

The AT81CP is a 0,6 mil conical magnet cartrige. Cartridge fits P-mount turntables.
Recommended load resistance: 47 kOhm
Suitable for Brand: Pioneer;Hitachi;Linear Tracking T4P Turntables; more→Technics
Channel separation at 1 kHz: 18 dB
Tracking angle: 20°
Weight: 6 g
Channel balance at 1 kHz: 2,5 dB
Material: Carbon Fibre Reinforced ABS
Tracking force recommended: 1,25 g
Tracking Force: 1 - 1,5 g
Weight (g): 0.0
Shape: Conical
Package Contents: Nut;Cartridge Installation Screw
Colour: Black
Type: P-mount Dual Moving Magnet Cartrige
Made in: Japan
Variant: AT81CP
Application: Hi-Fi
Frequency Range: 20 Hz - 20 kHz
Stylus tip radius: 0,6 mil
Voltage: 3,5 mV…

from £30.99 up to £38.50

Compare prices₄→

The Audio Technica AT-85EP is a stylish and reliable record player needle cartridge designed specifically for turntables. This cartridge comes in a sleek black and white color scheme, adding a touch o more→f elegance to your audio setup.The AT-85EP cartridge delivers exceptional sound quality, allowing you to enjoy your vinyl records with maximum clarity and precision. It is equipped with a highly sensitive elliptical diamond stylus, which enables it to accurately read the grooves on your records, capturing every detail and nuance of the music.This cartridge is suitable for use with both 33-1/3 and 45 RPM records, making it versatile and compatible with a wide range of vinyl collections. It ensures …

Audio-Technica Audio Technica AT-ART9XA Moving Coil Cartridge AT-ART9XA280524

1,249.00Buy!
£

Audio-Technica Audio Technica AT-ART9XI Moving Coil Cartridge AT-ART9XI280524

Delivery: in United Kingdom

Report

An update of the AT-ART7 the AT-ART9XA non-magnetic core MC cartridge features a Shibata stylus on a 0.28 mm diameter solid boron cantilever. The "ART" in the model number stands for Audio-Technica Re more→ference Transducer a designation Audio Technica give only to their flagship phono cartridges. Compared with the magnetic core used in most MC cartridges non-magnetic core cartridges are free from magnetic distortion allowing for natural timbre and a precise sound field. Although conventional non-magnetic cores struggle with output voltage the AT-ART9XA features a newly designed coil armature with an improved output voltage of 0.2 mV (1 kHz 5 cm/sec). The dual moving coils (fashioned from high-performance …

1,249.00Buy!
£

Audio Technica Audio Technica AT-HS10BK

Delivery: in United Kingdom

Report

Featuring a special line contact stylus on a 0.28 mm diameter solid boron cantilever the AT-ART9XI replaces the AT-ART9 as Audio-Technicas flagship magnetic core MC cartridge. The "ART" in the model n more→umber stands for Audio-Technica Reference Transducer a designation that they give only to their flagship phono cartridges. The specially designed magnetic circuit boasts an output voltage of 0.5 mV (1 kHz 5 cm/sec) making the cartridge easy to use and capable of reproducing even the most delicate expressions while also ensuring dynamic playback. The dual moving coils (fashioned from high-performance PCOCC wire) are aligned in an inverted V shape to provide high separation and wide response for clear …

39.95Buy!
£

Audio Technica Audio Technica AT-HS10SV

Delivery: in United Kingdom

Report

Headshell

26.95Buy!
£

Audio Technica Audio Technica AT-HS3

Delivery: in United Kingdom

Report

Headshell

27.99Buy!
£

Audio-Technica AT-HS4SV Headshell

Delivery: in United Kingdom

Report

Headshell

from £25.70 up to £28.00

Audio-Technica AT-HS6BK Headshell Black

The universal AT-HS4BK headshell in silver designed for use with straight 4-pin tonearms. The AT-HS4BK model features an ultra-lightweight (8.5 g) aluminum die-cast body to keep vibration to a minimu more→m. The advantage is a very simple and accurate placement of the stylus. The headshell is also equipped with color-coded lead wires and comes with mounting screws.
Weight (g): 8.5
Material: Aluminium
Made in: China
Type: Headshell
Colour: Grey

from £25.00 up to £27.90

Audio-Technica AT-HS6SV Headshell Silver

Universal 1/2" mount headshell for 4-pin turntable cartridges. It features an ultra-lightweight (9 g) aluminum die-cast body to keep vibration to a minimum and a finger lift to enable precise stylus p more→lacement. The headshell is also equipped with gold-plated lead wires for lossless signal transmission and comes with mounting screws.
Made in: China
Colour: Black
Original Colour by Producer: Black

from £25.00 up to £27.70

Audio-Technica Audio Technica AT-LH11H 11g Headshell AT-LH11H280524

from £84.95 up to £85.00

Audio-Technica AT-LH13H Headshell

The Audio Technica AT-LH11H an 11-gram headshell is designed with non-threaded through-holes ideally suited for compatibility with a wide range of cartridges. This even includes cartridges with thread more→ed mounting holes from series such as AT-OC9X AT-ART9X and VM95. As the lightest in the LH series the AT-LH11H Headshells reduced mass decreases unwanted vibrations during playback helping to enhance sound clarity and audio retrieval. The hard anodised finish also minimises vibrations as well as prevents distortion from hindering your listening experience. Equipped with oxygen-free copper lead wires the AT-LH11H delivers flawless signal transmission enabling you to fully engage with your records.…

from £70.10 up to £85.00

Audio-Technica AT-LH13OCC Headshell AT-LH13/OCC

The AT-LH13H is a 13-gram universal headshell designed for 4-pin turntable cartridges with threaded bodies, such as the AT-OC9X Series and VM95 Series. This aluminum headshell with hard anodized finis more→h reduces unwanted vibration and is equipped with OFC lead wires. It also features an adjustable cylinder and comes with installation screws, plastic washers, and a hexagonal wrench.
Package Contents: Plastic Washer;Hexagonal Wrench;Cartridge Installation Screw
Compatible with: VM95 cartridge series;AT-OC9x cartridge series
Type: Headshell
Colour: Black
Made in: China
Suitable for Brand: Audio-Technica
Weight: 13 g
Variant: 13 g
Original Colour by Producer: Black
Material: Aluminium
Weight (g): …

from £66.90 up to £70.00

Audio-Technica Audio Technica AT-LH15H 15g Universal Headshell AT-LH15H280524

13G TECHNIHARD™ adjustable headshell with AT6101 quad wire. Specifications: Adjustable overhang and adjustable azimuth (tilt), Threaded headshell avoiding in use of nuts when fitting cartridge, 7 pair more→s of installation screws (3mm, 5mm, 6mm, 8mm, 10mm, 12 mm and 14mm), 1 hexagon wrench (for overhanging and tilt adjustment).
Made in: China

85.00Buy!
£

Audio-Technica AT-LH15/OCC Headshell

Delivery: in United Kingdom

Report

The AT-LH15H is a 15-gram universal ½"-mount headshell optimised to accommodate 4-pin turntable cartridges with threaded bodies such as the AT-OC9X Series and VM95 Series cartridges. This aluminium he more→adshell with hard anodised finish reduces unwanted vibration and comes equipped with OFC (oxygen-free copper) lead wires. It also features an adjustable cylinder that enables precise azimuth and overhang settings. Includes cartridge installation screws plastic washers and a hexagonal wrench. The cartridge is also available in 13-gram (AT-LH13H) and 18-gram (AT-LH18H) models for optimal compatibility with your cartridge/tonearm requirements.

from £62.60 up to £70.00

Compare prices₄→

TechniHard adjustable headshell with AT6101 quad wire. The AT-LH13/OCC has an adjustable overhang and adjustable azimuth, as well as internal headhsell threads to avoid the use of nuts when fitting ca more→rtridges.
Colour: Silver
Made in: China

Audio-Technica Audio Technica AT-LH18H 18g Universal Headshell AT-LH18H280524

85.00Buy!
£

Audio-Technica AT-LH18/OCC Headshell

Delivery: in United Kingdom

Report

The AT-LH18H is a 18-gram universal ½"-mount headshell optimised to accommodate 4-pin turntable cartridges with threaded bodies such as the AT-OC9X Series and VM95 Series cartridges. This aluminium he more→adshell with hard anodised finish reduces unwanted vibration and comes equipped with OFC (oxygen-free copper) lead wires. It also features an adjustable cylinder that enables precise azimuth and overhang settings. Includes cartridge installation screws plastic washers and a hexagonal wrench.

from £69.00 up to £70.00

Audio Technica AT-LP3 Headshell AT-HS3290524

TechniHard adjustable headshell with AT6101 quad wire. With a mass of 18 g, the AT-LP18/OCC cell holder is used to adjust the cell advance and its azimuth. With its threaded end, it does not require t more→he use of nuts when mounting the cell.
Made in: China
Colour: Silver

28.00Buy!
£