Turntable Cartridges Audio-Technica

Audio Technica AT-VMN95C Conical Replacement Stylus is a genuine stylus manufactured by Audio Technology.

0.6 mil conical replacement stylus for these cartridges:AT81CP, AT300P, AT3482, AT3482H/U, AT3482P, AT90CD
Suitable for Brand: Audio-Technica
Suitable for: AT3482P;AT300P;AT90CD;AT3482;AT81CP
Tracking force recommended: 1,25g
Type: Replacement Stylus
Application: Hi-Fi
Tracking Force: 1g - 1,5g
Colour: Black
Variant: ATN81CP
Shape: Conical
Material: Plastic
Made in: Japan

Replacement diamond turntable needle for Audio Technica ATN91.

Please note: When choosing a stylus, please ensure that you match the model to the one already fitted to your turntable. Please ensure that the stylus you are replacing looks like the one in the picture.


Compatible with:
Audio Technica 2002 2003 2004 2005 2006 3000 AT91 ATN2001 ATN3600 ATN3601 ATN90 ATN91

Aiwa AN11 5050, CX550, DX700, DXM77, G888, GPE888, LXD1, LXE1, LX10, PXE55, PXE75, PXE77, PXE80, PXE88, PXE330, PXE500, PXE550, PXE770, PXE800, PXE800MK2, PXE850, PXE855, PXE860, PXE860K, PXED9, V550, V770, V770MK2, V790, X33, X35, X45, X55, X75, X78, X78DX, X35CD, X45CD, X55CD, X75CD, X77CD, X80CD, X79MCDD, XB1CD, …

ATN85EP Replacement stylus for AT85EP cartridge. Replacement stylus for AT85EP, Elliptical bonded stylus and Tracking force: 1.0 to 1.5 g (1.25 g standard)
Type: Replacement Stylus
Made in: Japan
Colour: White
Tracking force recommended: 1,25g
Suitable for: AT85EP
Material: Plastic
Application: Hi-Fi
Variant: ATN85EP
Shape: Elliptical
Suitable for Brand: Audio-Technica
Tracking Force: 1g - 1,5g

Universal 1/2" mount headshell for 4-pin turntable cartridges. It features an ultra-lightweight (9 g) aluminum die-cast body to keep vibration to a minimum and a finger lift to enable precise stylus placement. The headshell is also equipped with gold-plated lead wires for lossless signal transmission and comes with mounting screws.
Made in: China
Original Colour by Producer: Silver
Colour: Silver

The AT81CP is a 0,6 mil conical magnet cartrige. Cartridge fits P-mount turntables.
Suitable for Brand: Pioneer;Hitachi;Linear Tracking T4P Turntables;Technics
Tracking angle: 20°
Tracking Force: 1 - 1,5 g
Made in: Japan
Weight: 6 g
Type: P-mount Dual Moving Magnet Cartrige
Frequency Range: 20 Hz - 20 kHz
Package Contents: Cartridge Installation Screw;Nut
Channel balance at 1 kHz: 2,5 dB
Shape: Conical
Material: Carbon Fibre Reinforced ABS
Weight (g): 0.0
Stylus tip radius: 0,6 mil
Voltage: 3,5 mV
Recommended load resistance: 47 kOhm
Channel separation at 1 kHz: 18 dB
Tracking force recommended: 1,25 g
Variant: AT81CP
Colour: Black
Application: Hi-Fi…

Universal 1/2" mount headshell for 4-pin turntable cartridges. It features an ultra-lightweight (9 g) aluminum die-cast body to keep vibration to a minimum and a finger lift to enable precise stylus placement. The headshell is also equipped with gold-plated lead wires for lossless signal transmission and comes with mounting screws.
Colour: Black
Original Colour by Producer: Black
Made in: China

Elliptical replacement stylus with aluminium cantilever, elliptical stylus and bonded round shank. Color: Green
Colour: Green
Shape: Elliptical
Made in: China

The Audio Technica AT-85EP is a stylish and reliable record player needle cartridge designed specifically for turntables. This cartridge comes in a sleek black and white color scheme, adding a touch of elegance to your audio setup.The AT-85EP cartridge delivers exceptional sound quality, allowing you to enjoy your vinyl records with maximum clarity and precision. It is equipped with a highly sensitive elliptical diamond stylus, which enables it to accurately read the grooves on your records, capturing every detail and nuance of the music.This cartridge is suitable for use with both 33-1/3 and 45 RPM records, making it versatile and compatible with a wide range of vinyl collections. It ensures …

Adjustable headshell manufactured from aluminium, complete with gold plated terminal quad wire. The AT-LT13A has an adjustable overhang, as well as internal headhsell threads to avoid the use of nuts when fitting cartridges.
Made in: China
Colour: Black

Even the finest diamond stylus becomes worn after an extended period of play.The styli for the VM cartridges are no different. But it is easy to replace the stylus and continue to use your cartridge. The new VM cartridges have 7 styli and 3 types of bodies to choose from. Not only is it not necessary to buy an entirely new cartridge but you can also enjoy the experience of upgrading your stylus or trying a new cartridge/stylus combination.

Dual moving magnet stereo cartridge. The AT-XP series cartridges provide a high quality sound for vinyl DJ’s. Offering all of the features of a DJ cartridge, but with a Hi-fi sound, the XP series are perfect for the stage and club DJ who prioritises sound quality.
Tracking force recommended: 3g
Shape: Conical
Weight (g): 6.2
Channel separation at 1 kHz: 20
Impedance (Ohm): 6700.0
Made in: Japan
Type: VM Stereo Dual Magnet;Cartridge
Tracking angle: 20°
Frequency Range: 20 Hz - 18 kHz
Mounting: 1/2"
Voltage: 5.5 mV
Tracking Force: 2g - 4g
Recommended load capacitance: 100-200 pF
Recommended load resistance: 47 kOhm…

A replacement stylus for AT-XP5 cartridge.
Frequency Range: 20 Hz - 18 kHz
Shape: Elliptical
Made in: Japan

The replacement stylus for VM750SH. Shibata stylus.
Made in: Japan
Type: Replacement Stylus
Suitable for Brand: Audio-Technica
Package Quantity (pcs): 1
Colour: Brown
Application: Hi-Fi
Material: Plastic
Suitable for: VM750SH
Variant: VMN50SH
Shape: Shibata

Combo kit includes the AT-VM95C dual moving magnet cartridge premounted on the AT-HS6BK headshell.
Shape: Conical
Colour: Black;Blue
Type: VM Stereo Dual Magnet;Cartridge
Weight (g): 15.5
Mounting: 1/2"
Made in: China
Recommended load capacitance: 100-200 pF
Impedance (Ohm): 3300.0
Tracking force recommended: 2 g
Recommended load resistance: 47 kOhm
Tracking angle: 23°
Voltage: 4 mV
Frequency Range: 20 Hz - 20 kHz
Tracking Force: 1,8g - 2,2g

TechniHard adjustable headshell with AT6101 quad wire. The AT-LH13/OCC has an adjustable overhang and adjustable azimuth, as well as internal headhsell threads to avoid the use of nuts when fitting cartridges.
Colour: Silver
Made in: China

13G TECHNIHARD™ adjustable headshell with AT6101 quad wire. Specifications: Adjustable overhang and adjustable azimuth (tilt), Threaded headshell avoiding in use of nuts when fitting cartridge, 7 pairs of installation screws (3mm, 5mm, 6mm, 8mm, 10mm, 12 mm and 14mm), 1 hexagon wrench (for overhanging and tilt adjustment).
Made in: China

The replacement stylus for VM670SP. 3 mil Conical stylus.
Material: Plastic
Suitable for Brand: Audio-Technica
Tracking force recommended: 1,5 g
Made in: Japan
Tracking Force: 4,5g - 5,5g
Shape: Conical
Type: Replacement Stylus
Application: Hi-Fi
Variant: VMN70SP
Colour: Grey
Suitable for: VM670SP

TechniHard adjustable headshell with AT6101 quad wire. With a mass of 18 g, the AT-LP18/OCC cell holder is used to adjust the cell advance and its azimuth. With its threaded end, it does not require the use of nuts when mounting the cell.
Made in: China
Colour: Silver

Dual moving magnet cartridge. This VM95 Series cartridge with 3.0 mil conical stylus fits half-inch mount turntables. While this cartridge is designed to play 78 RPM mono records, it is, nevertheless, a stereo cartridge, allowing users to choose between the left and right channels, which can be especially helpful in archiving applications to minimize noise and distortion. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.
Frequency Range: 20 Hz - 20 kH…

The AT-LH13H is a 13-gram universal headshell designed for 4-pin turntable cartridges with threaded bodies, such as the AT-OC9X Series and VM95 Series. This aluminum headshell with hard anodized finish reduces unwanted vibration and is equipped with OFC lead wires. It also features an adjustable cylinder and comes with installation screws, plastic washers, and a hexagonal wrench.
Compatible with: VM95 cartridge series;AT-OC9x cartridge series
Package Contents: Plastic Washer;Cartridge Installation Screw;Hexagonal Wrench
Type: Headshell
Made in: China
Original Colour by Producer: Black
Weight: 13 g
Material: Aluminium
Variant: 13 g
Suitable for Brand: Audio-Technica
Weight (g): 13.0
Colour: Black…

Replacement cartridge with half-inch mount that is specially designed for the needs of DJs and features a highly-rigid polyphenylene sulfide (PPS)/glass fibre body and a tracking force of 2 to 4 grams (3 grams standard). It also offers a powerful output level of 5.5 mV, and its 0.3 x 0.7 mil elliptical bonded stylus tip tracks the record groove with high accuracy for outstanding audio reproduction. Durable carbon fibre-reinforced ABS cantilever and nylon wire suspension further ensure precise tracking and channel separation (20 dB at 1 kHz). The cartridge is also specifically designed to provide maximum visibility of the stylus tip. Frequency response: 20 Hz-18 kHz. Recommended load impedance: …

The Audio Technica AT-LH11H an 11-gram headshell is designed with non-threaded through-holes ideally suited for compatibility with a wide range of cartridges. This even includes cartridges with threaded mounting holes from series such as AT-OC9X AT-ART9X and VM95. As the lightest in the LH series the AT-LH11H Headshells reduced mass decreases unwanted vibrations during playback helping to enhance sound clarity and audio retrieval. The hard anodised finish also minimises vibrations as well as prevents distortion from hindering your listening experience. Equipped with oxygen-free copper lead wires the AT-LH11H delivers flawless signal transmission enabling you to fully engage with your records.…

Audio-Technica AT-VMN95EN Stylus for Cartridge is compatible with any VM95 series cartridge.