Turntable Cartridges Audio-Technica

Set includes AT-VM95EN cartridge from VM95 series mounted on AT-HS6BK headshell.
VM95 Series - Styli compatibility: Every cartridge diamond stylus becomes worn after a period of play. Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus. Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus. The six models of VM95 Series …

The AT-VM95ML, features a Nude Microlinear diamond, not only the Microlinear stylus will permit to double the duration of your stylus. The performance of a line contact stylus, will minimize the “inner groove distortion” as well as providing extended frequency response and maximize resolution in the medium and high frequencies of the audio program material.
Shape: Microlinear
Mounting: 1/2"
Tracking Force: 1,8g - 2,2g
Type: VM Stereo Dual Magnet;Cartridge
Made in: China
Voltage: 3.5 mV
Channel separation at 1 kHz: 23
Tracking force recommended: 2 g
Recommended load resistance: 47 kOhm
Frequency Range: 20 Hz - 25 kHz
Impedance (Ohm): 485.0
Colour: Black;Red
Tracking angle: 23°
Recommended load …

This VM95 Series cartridge with 2.7 x 0.26 mil Shibata stylus fits half-inch mount turntables. The cartridge offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.Specifications:Model: AT-VM95SHType: VM Stereo Dual MagnetMounting: 1/2” centresFrequency Response: 20 - 25,000 HzChannel Separation: 23 dB (1 kHz)Output Channel Balance: 1.5 dB (1 kHz)Output Voltage: 3.5 mV (…

Set includes AT-VM95SH cartridge from VM95 series mounted on AT-HS6BK headshell.
VM95 Series - Styli compatibility: Every cartridge diamond stylus becomes worn after a period of play. Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus. Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus. The six models of VM95 Series …

Dual moving magnet cartridge. This VM95 Series cartridge with 3.0 mil conical stylus fits half-inch mount turntables. While this cartridge is designed to play 78 RPM mono records, it is, nevertheless, a stereo cartridge, allowing users to choose between the left and right channels, which can be especially helpful in archiving applications to minimize noise and distortion. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.
Frequency Range: 20 Hz - 20 kH…

Set includes AT-VM95SP cartridge from VM95 series mounted on AT-HS6BK headshell.
VM95 Series - Styli compatibility: Every cartridge diamond stylus becomes worn after a period of play. Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus. Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus. The six models of VM95 Series …

Audio Technica AT-VMN95C Conical Replacement Stylus is a genuine stylus manufactured by Audio Technology.

Elliptical replacement stylus with aluminium cantilever, elliptical stylus and bonded round shank. Color: Green
Colour: Green
Shape: Elliptical
Made in: China

2.2 x 0.12 mil Microlinear replacement stylus for AT-VM95ML cartridges.
Made in: China
Shape: Microlinear

2.7 x 0.26 mil Shibata replacement stylus for AT-VM95SH cartridges.
Made in: China

78 rpm SP replacement stylus from VM95 series.
Made in: China
Application: Hi-Fi
Type: Replacement Stylus
Shape: Round
Suitable for: Audio-Technica VM95 series
Package Quantity (pcs): 1
Material: Aluminium
Colour: White
Suitable for Brand: Audio-Technica

Dual moving magnet stereo cartridge. The AT-XP series cartridges provide a high quality sound for vinyl DJ’s. Offering all of the features of a DJ cartridge, but with a Hi-fi sound, the XP series are perfect for the stage and club DJ who prioritises sound quality.
Tracking Force: 2g - 4g
Channel separation at 1 kHz: 20
Voltage: 5.5 mV
Tracking force recommended: 3g
Recommended load capacitance: 100-200 pF
Type: VM Stereo Dual Magnet;Cartridge
Frequency Range: 20 Hz - 18 kHz
Recommended load resistance: 47 kOhm
Weight (g): 6.2
Made in: Japan
Impedance (Ohm): 6700.0
Shape: Conical
Mounting: 1/2"
Tracking angle: 20°…

Replacement cartridge with half-inch mount that is specially designed for the needs of DJs and features a highly-rigid polyphenylene sulfide (PPS)/glass fibre body and a tracking force of 2 to 4 grams (3 grams standard). It also offers a powerful output level of 5.5 mV, and its 0.3 x 0.7 mil elliptical bonded stylus tip tracks the record groove with high accuracy for outstanding audio reproduction. Durable carbon fibre-reinforced ABS cantilever and nylon wire suspension further ensure precise tracking and channel separation (20 dB at 1 kHz). The cartridge is also specifically designed to provide maximum visibility of the stylus tip. Frequency response: 20 Hz-18 kHz. Recommended load impedance: …

Replacement cartridge with half-inch mount that is specially designed for the needs of DJs and features a highly-rigid polyphenylene sulfide (PPS)/glass fibre body and a tracking force of 2 to 4 grams (3 grams standard). It also offers a powerful output level of 6 mV, and its 0.3 x 0.7 mil elliptical bonded stylus tip tracks the record groove with high accuracy for outstanding audio reproduction. Tapered aluminium cantilever, stainless wire suspension and double-layered rubber dumper further ensure precise tracking and channel separation (22 dB at 1 kHz). The cartridge is also specifically designed to provide maximum visibility of the stylus tip. Frequency response: 20 Hz-20 kHz. Recommended …

The VM510CB conical stylus cartridge is the entry-level 500 Series. It is equipped with dual magnets that are positioned to match the left and right channels in the stereo record groove for outstanding channel separation and extended frequency response. The cartridge’s 0.6 mil conical bonded stylus tracks the center of the record groove for reliable performance and excellent fidelity. Includes mounting hardware.
Made in: China
Tracking angle: 23°
Frequency Range: 20 Hz - 20 kHz
Material: Aluminium;Plastic
Colour: Blue;Black
Suitable for Brand: Ordinary Turntable Brands
Package Contents: Nut;Cartridge Installation Screw;Washer
Application: Hi-Fi
Channel separation at 1 kHz: 25 dB
Shape: C…

The VM520EB is part of the 500 Series in Audio-Technica’s new VM cartridge line – a line that harks back to A-T’s early days as a manufacturer primarily of high-end phono cartridges, while also incorporating today’s advanced technology. Like all VM cartridges, the VM520EB is equipped with dual magnets that are positioned to match the left and right channels in the stereo record groove for outstanding channel separation and extended frequency response. The cartridge’s 0.3 x 0.7 mil elliptical bonded stylus tracks the record groove with high accuracy for outstanding audio reproduction.
Package Contents: Cartridge Installation Screw;Washer;Nut
Channel balance at 1 kHz: 1,5 dB
Voltage: 4.5 mV (1k…

The VM520EB/H combo kit includes the VM520EB elliptical bonded dual moving magnet cartridge premounted on the AT-HS10BK universal 1/2"-mount headshell.
Variant: VM520EB/H
Type: Stereo;Dual Moving Magnet Cartridge
Package Contents: Washer;Headshell;Cartridge Installation Screw;Nut
Suitable for: Turntables
Tracking angle: 23°
Weight (g): 0.0
Channel balance at 1 kHz: 1,5 dB
Tracking Force: 1,8g - 2,2g
Stylus tip radius: 0,3 x 0,7 mil
Suitable for Brand: Ordinary Turntable Brands
Colour: Black;Blue
Shape: Elliptical
Material: Aluminium
Recommended load capacitance: 100 - 200 pF
Made in: Japan
Recommended load resistance: 47 kOhm
Channel separation at 1 kHz: 27 dB
Compliance: 8 x 10-6 cm (100Hz)…

Dual moving magnet stereo cartridge with elliptical stylus. It offers elliptical nude profile diamond stylusm VM type dual magnet system, para-toroidal coils improve generating efficiency, aluminium cantilever, centre shield plate between stereo channels and durable low resonance polymer housing.
Stylus tip radius: 0,3 x 0,7 mil
Colour: Black;Orange
Frequency Range: 20 Hz - 25 kHz
Package Contents: Screws;Brush;Nut;Washer;Screwdriver
Recommended load resistance: 47 kOhm
Compliance: 8 x 10-6 cm (100Hz)
Tracking angle: 23°
Tracking Force: 1,8g - 2,2g
Type: VM Stereo Dual Magnet
Variant: 530EN
Tracking force recommended: 2 g
Material: Aluminium
Recommended load capacitance: 100 - 200 pF
Shape: E…

The VM530EN/H combo kit includes the VM530EN elliptical nude dual moving magnet cartridge premounted on the AT-HS10BK universal 1/2"-mount headshell.
Package Contents: Washer;Headshell;Nut;Cartridge Installation Screw
Suitable for: Turntables
Variant: VM530EN/H
Type: Stereo;Dual Moving Magnet Cartridge
Recommended load resistance: 47 kOhm
Channel balance at 1 kHz: 1,5 dB
Colour: Black;Orange
Compliance: 8 x 10-6 cm (100Hz)
Tracking angle: 23°
Tracking force recommended: 2 g
Application: Hi-Fi
Shape: Elliptical
Recommended load capacitance: 100 - 200 pF
Weight: 6,4 g
Channel separation at 1 kHz: 27 dB
Frequency Range: 20 Hz - 25 kHz
Stylus tip radius: 0,3 x 0,7 mil
Weight (g): 0.0
Material: A…

Dual moving magnet cartridge with MicroLine stylus. Like all VM cartridges, the VM540ML is equipped with dual magnets that are positioned to match the left and right channels in the stereo record groove for outstanding channel separation and extended frequency response. The cartridge’s MicroLine stylus allows it to trace the record groove with incredible accuracy, resulting in nuanced audio reproduction that elliptical and conical styli simply can’t match. The stylus’s multilevel shape also wears better than other styli, while reducing the wear on your records. Includes mounting hardware.
Tracking force recommended: 2 g
Type: Cartridge;VM Stereo Dual Magnet
Tracking angle: 23°
Frequency Range: …

The VM540ML/H combo kit includes the VM540ML MicroLine dual moving magnet cartridge premounted on the AT-HS10BK universal 1/2"-mount headshell.
Shape: Microlinear
Channel balance at 1 kHz: 1 dB
Package Contents: Headshell;Nut;Cartridge Installation Screw;Washer
Material: Aluminium
Recommended load capacitance: 100 - 200 pF
Frequency Range: 20 Hz - 27 kHz
Voltage: 4 mV
Application: Hi-Fi
Made in: Japan
Recommended load resistance: 47 kOhm
Stylus tip radius: 0,12 x 2,2 mil
Weight (g): 0.0
Colour: Red;Black
Tracking force recommended: 2 g
Suitable for Brand: Ordinary Turntable Brands
Compliance: 10 x 10-6 cm (100 Hz)
Tracking Force: 1,8g - 2,2g
Channel separation at 1 kHz: 28 dB
Weight: 8 g
Tracking …

Mono LP model with a conical bonded stylus in the body dedicated to monaural sound. Specialised internal wiring allows for reduced surface noise and stable sound reproduction.