Routers & Trimmers

Two Flute Cutter for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips.

Self-guiding trimmers with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the bearing to follow a template or base edge of board.An approximate 3mm overlap should be left before copy profiling.When using plastic laminate adhesive to dry before trimming.This avoids clogging the guide bearing.Refs. T46/1, 46/2 and 46/20 are downcut to prevent breakout on veneer.Ref. 46/211 has a sleeved bearing to allow for regrinds in case of resharpening. D 12.7 mm. C 50 mm. B 12.7 mm. A 90 degrees. Shank Diameter 1/2 inch.

Self-guiding triple flute cutters provide a super fine finish and longer life. Suitable for laminate or plywood overlay. This trimmer has twin bearings for stability by increasing the bearing surface. An industrial profiling tool for longer runs of work when a clean finish is needed. T.C.T. 1/2in Shank A Angle = 90 . C = 38.1mm. D = 12.7mm.

Diameter (D) of 28mm and cutting height (NL) of 7mm
Made in Germany
Package Dimension : 3.94 inches L x 1.97 inches W x 1.97 inches H

Clarkson 10PM/13PM standard series two flute slot drills. Made from M42 High Speed Steel with 8% cobalt. Specifications • Milling Diameter: 30mm • Shank Diameter: 25mm • Length of Cut: 30mm • Overall Length: 93.5mm • Square End Helix Angle: 30°Features & Benefits• Premium grade M24 High Speed Steel with 8% cobalt (HSS Co8) • Screwed shank to BS122/4 • Two flutes • Multidirectional

Supplied with alternative bearings to produce a rounding over and two sizes of ovolo moulding. The smaller bearing gives a 3.2mm quirk. Specifications: • Shank Diameter: 1/2 • Dia Metric: 48 • Cut Length Metric: 22 • Overall Length Metric: 68 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 15.9 • Radius 1 Imperial: 5/8

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can be produced. A full round/bullnose for stair treads can also be produced by taking a second pass from the opposite side of the workpiece. Specifications: • Shank Diameter: 1/2 • Dia Metric: 51 • Cut Length Metric: 25 • Overall Length Metric: 75 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 19.1 • Radius 1 Imperial: 3/4

With ball bearing guide. To trim plastic or laminate facings. Used extensively in cabinet making and shop fitting. Suitable for straight or curved work.

The Trend Countersink Set contains five heat treated tool steel countersinks with hex shafts. They are fitted with High Speed Steel drill bits to cover the full range of screw sizes and are self clearing. They are adjustable for different length screws and will produce a 9.5mm (3/8in) or 12.7mm (1/2in) diameter counterbored hole to fit standard woodplugs. Contains 1 x 2.0mm (5/64in) Drill and C/S Size No.4. 1 x 2.4mm (3/32in) Drill and C/S Size No.6. 1 x 2.8mm (7/64in) Drill and C/S Size. No.8. 1 x 3.2mm (1/8in) Drill and C/S Size. No.10. 1 x 3.6mm (9/64in) Drill and C/S Size. No.12. Tungsten carbide tipped version, these tools can be used in abrasive materials such as laminated chipboard. The …