Routers & Trimmers

Tungsten Carbide Tipped for abrasive materials such as Chipboard, MDF, Plywood, Hardwoods and Hard Plastics. Two flutes give a clean finish to the cut edges. All cutters are suitable for plunge routers. Cutters above and including 9.5mm have TCT plunge Centre tip

Clarkson 02PM/04PM long series multi flute end mills. Made from M42 High Speed Steel with 8% cobalt. Sizes 3.0mm - 20.0mm: Four Flutes Sizes 22.0mm - 38.0mm: Six Flutes Sizes 40.0mm - 50.00mm: Eight Flutes BS 122/4. Specifications • Milling Diameter: 7mm • Shank Diameter: 10mm • Length of Cut: 34mm • Overall Length: 79.5mm • Square End Helix Angle: 30°Features & Benefits• Premium grade M24 High Speed Steel with 8% cobalt (HSS Co8) • Screwed shank to BS122/4 • Multidirectional

Tungsten Carbide Tipped for abrasive materials such as Chipboard, MDF, Plywood, Hardwoods and Hard Plastics. Two flutes give a clean finish to the cut edges. All cutters are suitable for plunge routers. Cutters above and including 9.5mm have TCT plunge Centre tip

Two flute straight plunging bits General-purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Clarkson 01PM/03PM standard series multi flute end mills. Made from M42 High Speed Steel with 8% cobalt. Sizes 2.0mm - 20.0mm: Four Flutes Sizes 21.0mm - 38.0mm: Six Flutes Sizes 40.0mm - 50.00mm: Eight Flutes BS 122/4. Specifications • Milling Diameter: 26mm • Shank Diameter: 25mm • Length of Cut: 43mm • Overall Length: 101.5mm • Square End Helix Angle: 30°Features & Benefits• Premium grade M24 High Speed Steel with 8% cobalt (HSS Co8) • Screwed shank to BS122/4 • Multidirectional

Trend Two Flute Straight Cutters produce a cleaner finish than single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges. Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. This Trend 4/2 x 1/2 TCT Two Flute Cutter has the following specification D 16mm (5/8in) C 19mm OL 60mm Shank Diameter 1/2in

Tungsten Carbide Tipped for abrasive materials such as Chipboard, MDF, Plywood, Hardwoods and Hard Plastics. Two flutes give a clean finish to the cut edges. All cutters are suitable for plunge routers. Cutters above and including 9.5mm have TCT plunge Centre tip

Makita 195563-0 Plunge Base Assembly The Makita 195563-0 is a Plunge Base Assembly that fits the RT0700 Router / Laminate Trimmer. Designed with lightweight aluminium construction and rubber-coated handles for maximum user comfort and grip. The Makita 195563-0 also comes equipped with a chip guard to prevent injury. Features:
- Lightweight aluminium construction
- Fitted with chip guard
- Rubber coated handles for added grip and comfort
- Fits RT0700 Router / Laminate Trimmer Specification:
- Height: 180mm
- Width including handles: 230mm

The Einhell TP-RO 18 Li BL is a brushless router which is a member of the Power X-Change family and will run on any 18v Power X-Change battery. This starter set includes two interchangeable bases and a selection of accessories, as well as a storage bag to keep everything in. The brushless motor in the P-RO 18 Li BL delivers excellent performance and is covered by a separate 10 year warraty when registered with Einhell. Important: The collets provided are only suitable for use with 6mm or 8mm shank accessories. These collets should not be used with 1/4" shank accessories as they can't be properly tightened and are a safety hazard. Features & Benefits • Member of the Power X-Change family …

15 Pce cutter set, containing a range of popular cutters. Suitable for grooving, profiling and moulding. Use on softwoods, hardwoods, MDF and plywood. Supplied in a plastic carry case.