Routers & Trimmers

This Trend GRAB/SE1/set Damaged Screw Remover Set (2pc) has versatile double-ended bits to remove damaged screws, machine screws and broken bolts from wood, metal and plastic. Made from high-speed steel they can remove screw sizes from Nos. 6 - 14 and broken bolts from size M4 - M8, they will remove these cleanly from wood, metal or plastic. Removing screws made of any alloy, including soft brass, and also removes free spinning screws. They have a Winslow tip for self-centring and are double ended (burnisher and tapered thread). The hex shoulder aids removal of jammed screws or bolts and the serrated extracting end of the tool results in torque for hard to remove screws. Specifications Set of …

Single Flute Helical For drilling slotting, cutting aluminium anodised duralium and UPVC. Ideal for recessing and slotting extrusions. HSSE is a special grade for machining abrasive anodised finishes. *6mm shank.

Two flute straight plunging bits General-purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Clarkson 01PM/03PM standard series multi flute end mills. Made from M42 High Speed Steel with 8% cobalt. Sizes 2.0mm - 20.0mm: Four Flutes Sizes 21.0mm - 38.0mm: Six Flutes Sizes 40.0mm - 50.00mm: Eight Flutes BS 122/4. Specifications • Milling Diameter: 16mm • Shank Diameter: 16mm • Length of Cut: 26.5mm • Overall Length: 80mm • Square End Helix Angle: 30°Features & Benefits• Premium grade M24 High Speed Steel with 8% cobalt (HSS Co8) • Screwed shank to BS122/4 • Multidirectional

Trend Craft Pro Bearing Guided Corner Bead for attractive edge moulds. A full corner bead can be produced by making a second pass at 90. With two carbide TCT cutting tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials. 1/4in shank for easy control in smaller routers with 'K'mark to ensure safe working practices. A PTFE coating minimises heat and resin build up for increased cutter performance and longevity. For use on all man-made boards such as medium density fibre board, chipboard, and also natural timbers and most plastics. This Trend C140 x 1/4 TCT Bearing Guided Corner Bead has the following specification Cutting Diameter 22.3mm (7/8in) Cutting …

Tungsten Carbide Tipped for abrasive materials such as Chipboard, MDF, Plywood, Hardwoods and Hard Plastics. Two flutes give a clean finish to the cut edges. All cutters are suitable for plunge routers. Cutters above and including 9.5mm have TCT plunge Centre tip

Uses/4" shank bits
Fits RT0700 Compact Router
Allows for different profiles when using the same router bit
Ideal for trimming laminated boards and other thin materials

Clarkson 10PM/13PM standard series two flute slot drills. Made from M42 High Speed Steel with 8% cobalt. Specifications • Milling Diameter: 26mm • Shank Diameter: 25mm • Length of Cut: 27mm • Overall Length: 95mm • Square End Helix Angle: 30°Features & Benefits• Premium grade M24 High Speed Steel with 8% cobalt (HSS Co8) • Screwed shank to BS122/4 • Two flutes • Multidirectional

This Trend Craft Pro 1/4in shank Bearing Guided Rebater, router cutter, has a 35mm diameter and two flute carbide tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. It has a bottom bearing guide for cutting rebates on curved and straight work with accuracy and ease. This cutter is supplied with two bearings for 11.1 and 12.7mm wide rebates for glazing and panel work. It has PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. The 1/4in shank gives easy control in smaller routers with 'K' mark shank to ensure safe working practices. Specifications Diameter 35.0mm. Cutting Length 12.7mm. Rebate 11.1mm.…

Two flute straight plunging bits General-purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.