Routers & Trimmers

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Diameter: 1/2 • Dia Metric: 50.8 • Dia Imperial: 2 • Cut Length Metric: 25 • Overall Length Metric: 66

Self-guiding trimmers with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the bearing to follow a template or base edge of board. A maximum of 3mm overlap should be left before copy profiling. When using plastic laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Specifications: • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 51 • Cut Length Imperial: 2 • Overall Length Metric: 106 • Bearing Dia Metric: 12.7 • Bearing Dia Imperial: 1/2

Self-guiding triple flute cutter. Extra fine trimming and longer life. For trimming of laminate or plywood overlay etc. Has twin bearings for stability by increasing the bearing surface and is an industrial profiling tool for longer runs of work. Specifications: • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 38.1 • Overall Length Metric: 104 • Bearing Dia Metric: 12.7 • Bearing Dia Imperial: 1/2 • Angle: 90

Faithful Blue Poly Rope meets the needs of most trades and is suitable for a variety of applications in the home and workplace.Diameter : 12 mm.Length : 220 m.Breaking strain : 1450 kg.Additional Information:• Diameter: 12mm• Length: 220m

Diameter (D) of 28mm and cutting height (NL) of 7mm
Made in Germany
Package Dimension : 3.94 inches L x 1.97 inches W x 1.97 inches H

Clarkson 10PM/13PM standard series two flute slot drills. Made from M42 High Speed Steel with 8% cobalt. Specifications • Milling Diameter: 30mm • Shank Diameter: 25mm • Length of Cut: 30mm • Overall Length: 93.5mm • Square End Helix Angle: 30°Features & Benefits• Premium grade M24 High Speed Steel with 8% cobalt (HSS Co8) • Screwed shank to BS122/4 • Two flutes • Multidirectional

Fifteen piece cutter set, containing a range of popular cutters. Suitable for grooving, profiling and moulding. Use on softwoods, hardwoods, MDF and plywood. Supplied in a plastic carry case. Specifications: • Shank Diameter: 1/2 • Pack Qty: 15 piece Contents: 1 x Single Flute dia 4.8mm x 11mm 1 x Two Flute dia 6.3mm x 19mm 1 x Two Flute dia 12.7mm x 25mm cut 1 x Two Flute dia 19mm x 25mm cut 1 x Dovetail dia 12.7mm 2 x Guided Round Over radius 9.5mm & 12.7mm 1 x Guided Chamfer 45 degree 1 x Guided Roman Ogee radius 4mm 1 x Guided Trimmer dia 12.7mm 2 x Guided Cove radius 6.3mm & 12.7mm 1 x 'V' Groove 45 degree 1 x Core Box radius 6.35mm 1 x Guided Rebater 11.1 rebate

Supplied with alternative bearings to produce a rounding over and two sizes of ovolo moulding. The smaller bearing gives a 3.2mm quirk. Specifications: • Shank Diameter: 1/2 • Dia Metric: 48 • Cut Length Metric: 22 • Overall Length Metric: 68 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 15.9 • Radius 1 Imperial: 5/8

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can be produced. A full round/bullnose for stair treads can also be produced by taking a second pass from the opposite side of the workpiece. Specifications: • Shank Diameter: 1/2 • Dia Metric: 51 • Cut Length Metric: 25 • Overall Length Metric: 75 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 19.1 • Radius 1 Imperial: 3/4

Self-guiding trimmers with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the bearing to follow a template or base edge of board. An approximate 3mm overlap should be left before copy profiling. When using plastic laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Specifications: • Shank Diameter: 1/2 • Dia Metric: 18.2 • Cut Length Metric: 50 • Overall Length Metric: 103 • Bearing Dia Metric: 18.2

Trend Snappy TCT Countersink Set - 5 piece set A 5 piece set for all your countersinking and piloting needs covering Imperial screw gauges from No4 through to No12. Comprises 1 x 2.0mm (5/64"") drill countersink, 1 x 2.5mm (3/32"") drill countersink, 1 x 2.75mm (7/64"") drill countersink, 1 x 3.25mm (1/8"") drill countersink and 1 x 3.5mm (9/64"") drill countersink with 9.5mm and 12.7mm counterbore diameters." TCT cutting tips for assured, long life performance in all timbers and abrasive timber based materials including ply, MDF and chipboard. Adjustable drilling depth to suit material thickness with easily replaceable drills should any damage occur. Can be used to make countersinks …