Routers & Trimmers

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Diameter: 1/2 • Dia Metric: 10 • Dia Imperial: 25/64 • Cut Length Metric: 25 • Overall Length Metric: 71

Trend Professional 1/4in shank bearing guided pierce and trim cutter - 6.3mm diameter for laminate work 6.3mm diameter X 18mm cutting length pierce and trim cutter for flush cutting laminated apertures cleanly. 1/4in shank and 18mm cutting range; ideal for smaller routers and thinner materials allowing easy control. Cutter has a piercing tip to drill through the laminate and run against the work to make the cut in one go for fast, efficient and clean cutting. 1/4in shank for easy control in smaller routers with 'K'mark shank to ensure safe working practices. Specifications: • Shank Diameter: 1/4 • Dia Metric: 6.3 • Dia Imperial: 1/4 • Cut Length Metric: 18 • Overall …

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Specifications: • Shank Diameter: 1/4 • Dia Metric: 12 • Dia Imperial: 15/32 • Cut Length Metric: 19 • Cut Length Imperial: 3/4 • Overall Length Metric: 71 • Type or Grade: Centre tip

Trend Craft Pro 1/2in shank worktop joint cutter - 12.7mm diameter Two Flute Carbide tips. 12.7mm diameter X 50mm cutting depth; the essential cutter for routing post formed joints with worktop jigs in tops up to 40mm thick. Cut crisp and clean precision fit joints every time; especially suited for use on abrasive chipboard core laminate faced worktops. Bottom cut feature for plunge work including stopped grooving and morticing applications. PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. 1/2in shank for use in bigger routers and heavier applications with 'K'mark shank to ensure safe working practices. Specifications: • Shank Diameter: …

Trend TR47X1/2TC Roman Ogee 4mm Radius x 15.9mm Cut The Trend TR47X1/2TC Roman Ogee features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials and give extra long life. Features:
- PTFE coated, indicated by distinctive black colouring
- Can be used on hardwood & softwood, fibreboard, plywood and particle board
- Etched dimensions on extra long 40mm shanks, for quick identification
- By raising the cutter, the top quirk is removed  Specification:
- D1:  25.4mm
- C:  5/8 Inch
- C:  15.9mm
- OL:  64mm
- B:  9.5mm
- R1:  4mm
- Shank Diameter:  1/2 Inch

The BOSCH PROFESSIONAL POF800/GOF900 8mm Spring Clamp Grey is a versatile and durable tool designed specifically for use in garden and terrace settings, particularly for fixing and securing parasols and awnings. This spring clamp is engineered with precision and built to the highest standards expected from Bosch Professional.The clamp is manufactured with an 8mm opening, allowing it to firmly grip onto various materials with ease. Whether you need to secure a parasol to a deck or fasten an awning to a terrace, this clamp offers a reliable and solid grip for a variety of applications. Its grey color lends a sleek and modern look to any outdoor space.Built with strength and durability in mind,…

Model Number: DE6274-XJ
Item Package Quantity: 1
Package Weight: 9.07 grams
Package Dimensions (L x B x H) in cm: 12 x 7.8 x 1.8

Pocket Hole Drill - 9.5mm diameter Professional quality High Speed Steel drill bit compatible with the Trend Pocket Hole Jig, Pocket Hole Mini and Pocket Hole Pro. Stepped design to drill perfect pockets complete with pilot hole to ensure each screw drives correctly. 9.5mm diameter with straight shank, compatible with mains and battery drills with 10mm and upward chucks. Sharp flutes for fast clean cutting and fast chip ejection for increased performance and long lifespan. Ideal for use with hard and softwoods, ply, chipboard and MDF. Specifications: • Dia Metric: 9.5 • Dia2 Metric: 4.2 • Overall Length Metric: 155

Single flute helical for drilling and slotting, cutting aluminium anodised duralium and uPVC plastic. Cutters are designed to plunge and machine or mill lateral slots. All aluminium tooling should be used with a coolant, wax stick or lubricant. Material should be securely clamped. Ideal for recessing and slotting extrusions. HSSE is a special grade for machining the most abrasive anodised finishes. Specifications: • Shank Diameter: 8 mm • Dia Metric: 6 • Cut Length Metric: 14 • Overall Length Metric: 60 • Type or Grade: Up-cut

A bearing guided tungsten carbide tipped cutter designed to produce a decorative edge when working on MDF, softwoods, hardwoods, and plywood. 1/4in Shank Radius 3.2mm Diameter 22mm

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specifications: • Shank Diameter: 1/4 • Dia Metric: 6 • Cut Length Metric: 25 • Overall Length Metric: 57

Trend Craft Pro 1/4in shank straight router cutter - 12.7mm diameter Two Flute Carbide tips Two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials. With bottom cut feature for general purpose slotting, grooving and 31.8mm deep cutting depth for deeper morticing work on light joinery and furniture work. 12.7mm diameter X 31.8mm cutting depth ideal for matched slots and grooves with sheet material for panel work, deep rebating and trimming. PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. 1/4in shank for easy control in smaller routers with 'K'mark shank to ensure safe working …

Trend Craft Pro 1/4in shank bearing guided flush trimming cutter - 12.7mm diameter Two Flute Carbide tips. Two flute carbide TCT tips for clean, professional finish on timber lippings, plastic laminates and veneers. 12.7mm diameter X 9.5mm cutting depth shank mounted bearing guided trimmer. Ideally suited to flush trim laminate and veneer work. 1/4in shank for smaller routers and easy control for hand held trimming use on curved and straight edge work or to follow templates for shallow rebating. PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. 1/4in shank for easy control in smaller routers with 'K'mark shank to ensure safe working practices.…

One of a comprehensive range of high quality accessories for Model No. SM2502 mini drilling/milling machine. Features & Benefits: • One of a comprehensive range of high quality accessories for Model No. SM2502 mini drilling/milling machine. • Model No. SM2502EM14 Specifications: Model No SM2502EM14 Brand: Sealey Description: HSS End Mill Ø14mm 2 Flute Nett Weight: 0.09kg