Routers & Trimmers

18V Drill Driver with Brushless Motor Technology25% more power Brushless motors have fewer moving parts results in a quiet motor that never needs maintenance. The reduced friction enables a better use of available energy from the battery pack as there is no resistance from brushes50% more run time Brushless motor technology means the carbon brush resistance is eliminated, so less battery energy is wasted. The efficiency of a brushless motor results in a greater run time from each charge2-Speed variable gearbox for efficient drilling of various materials.Drilling and hammer functions19+1 position adjustable torque control for consistent application into a variety of materials Trigger switch with …

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Diameter: 1/4 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 25 • Overall Length Metric: 55

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 25 • Overall Length Metric: 68

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specifications: • Shank Diameter: 1/2 • Dia Metric: 8 • Dia Imperial: 5/16 • Cut Length Metric: 25 • Overall Length Metric: 69

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Diameter: 1/2 • Dia Metric: 9.5 • Dia Imperial: 3/8 • Cut Length Metric: 25 • Overall Length Metric: 71

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Diameter: 1/4 • Dia Metric: 10 • Dia Imperial: 25/64 • Cut Length Metric: 19 • Overall Length Metric: 59

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Diameter: 1/4 • Dia Metric: 10 • Dia Imperial: 25/64 • Cut Length Metric: 25 • Overall Length Metric: 65

Two flute straight plunging bits General-purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Clarkson 10PM/13PM standard series two flute slot drills. Made from M42 High Speed Steel with 8% cobalt. Specifications • Milling Diameter: 17mm • Shank Diameter: 16mm • Length of Cut: 24mm • Overall Length: 72mm • Square End Helix Angle: 30°

Trend Anglefix Mitre Guide The Trend Anglefix Mitre Guide is made from glass-fibre reinforced nylon. Very quick and easy to use, saving time. Features: Use for mitre cutting of frames, skirting, architrave and beading as well as basic marking out Automatically halves the angle joint Halves angles to achieve correct cutting angle before cutting mitres Use for mitre cutting of frame, skirting (not tall skirting) , architraves and beading as well as basic marking out Sets internal and external angles Can be used with hand mitre and snip-off saws Specification: Weight: 0.156kg

Aluminium construction
Round base assembly for smooth and fast cutting with easy handling
Rubberised grip for increased comfort in use
Quick release cam lock system
Allows for routing in confined, hard to reach areas
Ideal for a variety of routing applications
Suitable for use with Makita RT0700, RT001G and DRT50 Trimmers

Clarkson 01PM/03PM standard series multi flute end mills. Made from M42 High Speed Steel with 8% cobalt. Sizes 2.0mm - 20.0mm: Four Flutes Sizes 21.0mm - 38.0mm: Six Flutes Sizes 40.0mm - 50.00mm: Eight Flutes BS 122/4. Specifications • Milling Diameter: 19mm • Shank Diameter: 16mm • Length of Cut: 38mm • Overall Length: 83.5mm • Square End Helix Angle: 30°Features & Benefits• Premium grade M24 High Speed Steel with 8% cobalt (HSS Co8) • Screwed shank to BS122/4 • Multidirectional

Clarkson 02PM/04PM long series multi flute end mills. Made from M42 High Speed Steel with 8% cobalt. Sizes 3.0mm - 20.0mm: Four Flutes Sizes 22.0mm - 38.0mm: Six Flutes Sizes 40.0mm - 50.00mm: Eight Flutes BS 122/4. Specifications • Milling Diameter: 20mm • Shank Diameter: 16mm • Length of Cut: 76mm • Overall Length: 121.5mm • Square End Helix Angle: 30°Features & Benefits• Premium grade M24 High Speed Steel with 8% cobalt (HSS Co8) • Screwed shank to BS122/4 • Multidirectional

Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Small diameter tools must be handled with care to avoid breakage. Single flute cutters should not be used in eccentric chucks. Specifications: • Shank Diameter: 1/4 • Dia Metric: 6.3 • Dia Imperial: 1/4 • Cut Length Metric: 19 • Overall Length Metric: 50

Trend Snappy 4.75mm x 12.7mm TCT Counterbore - to recess screws for plugging 12/7mm diameter TCT counterbore to drill precision recess to hide screws below the surface when used with matching plug cutter. Ideal for screws up to 12 gauge Imperial sizes Used in conjunction with the Trend Snappy SNAP/PC/127T or SNAP/PC/12 Plug Cutters, fixings can be hidden with an almost invisible plug for a high quality, professional finish. 4.75mm diameter drill allows for pilot/screw clearance to prevent splitting and to ensure accurate, consistent alignment. Drill depth can be altered to suit material thickness and is easily replaceable if it becomes damaged. TCT cutting faces can be resharpened ensuring …