Routers & Trimmers

Trend Single Flute Cutters are chosen for fast, free cutting when cutting speed takes preference over finish. If you require a cleaner cut, two flute cutters are recommended. Suitable for grooving, rebating, morticing and drilling. Cutters of 2.0mm diameter and below should have a maximum of 1.0mm depth of cut per pass. Small diameter tools must be handled with care to avoid breakage. Single flute cutters should not be used in eccentric chucks.

The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges. Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. This Trend 3/03 x 1/4 TCT Two Flute Cutter has the following specification D 4.5mm C 11mm OL 51mm Shank Diameter 1/4in

Tungsten Carbide Tipped for abrasive materials such as Chipboard, MDF, Plywood, Hardwoods and Hard Plastics. Two flutes give a clean finish to the cut edges. All cutters are suitable for plunge routers. Cutters above and including 9.5mm have TCT plunge Centre tip

With ball bearing guide. To trim plastic or laminate facings. Used extensively in cabinet making and shop fitting. Suitable for straight or curved work.

Clarkson 10PM/13PM standard series two flute slot drills. Made from M42 High Speed Steel with 8% cobalt. Specifications • Milling Diameter: 19mm • Shank Diameter: 16mm • Length of Cut: 25.5mm • Overall Length: 77mm • Square End Helix Angle: 30°

Clarkson 01PM/03PM standard series multi flute end mills. Made from M42 High Speed Steel with 8% cobalt. Sizes 2.0mm - 20.0mm: Four Flutes Sizes 21.0mm - 38.0mm: Six Flutes Sizes 40.0mm - 50.00mm: Eight Flutes BS 122/4. Specifications • Milling Diameter: 17mm • Shank Diameter: 16mm • Length of Cut: 32mm • Overall Length: 80mm • Square End Helix Angle: 30°Features & Benefits• Premium grade M24 High Speed Steel with 8% cobalt (HSS Co8) • Screwed shank to BS122/4 • Multidirectional

• One of a comprehensive range of high quality accessories for Model No. SM2502 mini drilling/milling machine.• HSS End Mill ø16mm for SM2502.One of a comprehensive range of high quality accessories for Model No. SM2502 mini drilling/milling machine.• One of a comprehensive range of high quality accessories for Model No. SM2502 mini drilling/milling machine. • Model No. SM2502EM16Technical Specification:Description: HSS End Mill ø16mm 2 FluteNett Weight: 0.09kgDimensions: Length: 30mm x Height: 30mmWeight: 0.12KgWarranty: Consumable

The Trend Anglefix is a must have accessory for quick, accurate mitre saw setup when cutting mitres. It is simple to use, the desired angle is taken by wrapping around the desired internal or external corner. The central metal tab automatically bisects the angle taken for fast setting without any measurements or additional tools. This anglefix is ideal for setting mitre angles for skirting, architrave, dado rails, picture frames, moulding and more. It makes setting angles simplified, speeding up mitre work for trade and hobbyists alike.

Trend C172X1/2TC Two Flute Straight Router Cutter 12mm x 1/2" Shank The Trend C172X1/2TC straight cutter is suitable for a wide range of applications including engraving, grooving & rebating on materials such as softwoods, hardwood, and MDF. The microgranular TC tips ensure perfect sharpness and long life. Features:
- Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising
- Use on softwoods, hardwoods, MDF, plywood, and chipboard
- Cutter has a bottom cut feature
- Highly ground tip ace maintains its edge
- PTFE non-stick coated body
- Extra long shank
- Suitable for all makes of router Specification:
- D1: 15/32 inches
- D1: 12 …

Clarkson 02PM/04PM long series multi flute end mills. Made from M42 High Speed Steel with 8% cobalt. Sizes 3.0mm - 20.0mm: Four Flutes Sizes 22.0mm - 38.0mm: Six Flutes Sizes 40.0mm - 50.00mm: Eight Flutes BS 122/4. Specifications • Milling Diameter: 16mm • Shank Diameter: 16mm • Length of Cut: 58.5mm • Overall Length: 108.5mm • Square End Helix Angle: 30°Features & Benefits• Premium grade M24 High Speed Steel with 8% cobalt (HSS Co8) • Screwed shank to BS122/4 • Multidirectional