Vises & Clamps

Clamping force up to 16,000 N, Space-saving construction, thus up to 30% smaller than comparable competitive models, Housing and pressure arm made from hardened and tempered stainless steel, making it extremely robust and durable, Available in three pressure arm versions: Short and long pressure arm with swivelable aluminium pressure shoe or pointed pressure arm for clamping on narrow sections or in confined space, BAS-C with open fixing hole and BAS-CB with closed fixing hole for M10/M12

Machine Accessory

Quick fixing thanks to clamping levers on the side
Makes full-surface working of the work piece possible – even round and flat parts
Patented pull-down mechanism prevents the work piece from lifting from the table surface when clamping – even without fastening screws

14 kg / Wing Span 125 mm / Jaw Width 150 mm

UniKlamp is ideal for sensitive workpieces and right angles. The large, perfectly parallel jaw faces are characteristic of the original BESSEY K-body clamp. They allow easy clamping and spreading of sensitive surfaces and right angles. Also round and pointed workpieces. And the best thing is thanks to their extra-large contact surfaces, the original BESSEY K-body clamp are universally applicable even behind and to the side of the high-quality profiled rail. This allows you to clamp in locations that conventional screw clamps are unable to reach. That's guaranteed The K-body clamp holds workpieces exactly parallel. Parallel jaw faces with extra-large contact surfaces. Clamping of various shapes,…

Tempered profile and sliding arm for sprung and elastic clamping
Lever handle with an indexing mechanism for controlled, fast and vibration-proof clamping
Clamping height: 300mm

Tempered profile and sliding arm for sprung and elastic clamping
Lever handle with an indexing mechanism for controlled, fast and vibration-proof clamping
Clamping height: 300mm

TW16: Clamping force up to 3,000 N, TW28: Clamping force up to 5,000 N Precise, individual clamping Tempered profile and sliding arm for sprung and elastic clamping Various design versions: High quality 2-component plastic handle and tommy bar with rounded ends each with smooth-running trapezoidal threaded spindle and tool-free pressure plate replacement Lever handle with an indexing mechanism for controlled, fast and vibration-proof clamping

TW16: Clamping force up to 3,000 N, TW28: Clamping force up to 5,000 N Precise, individual clamping Tempered profile and sliding arm for sprung and elastic clamping Various design versions: High quality 2-component plastic handle and tommy bar with rounded ends each with smooth-running trapezoidal threaded spindle and tool-free pressure plate replacement Lever handle with an indexing mechanism for controlled, fast and vibration-proof clamping

Precise, individual clamping
Tempered profile and sliding arm for sprung and elastic clamping
Lever handle with an indexing mechanism for controlled, fast and vibration-proof clamping
Item package weight: 0.94 kilograms

Clamping force up to 6,000 N Ergonomically shaped wood handle Pressure plates can be replaced by hand no tools required (from 80 mm throat depth) With protective caps on the clamping surfaces Stable profiled rail with serration BESSEY anti-slip system (from 80 mm throat depth) Integrated BESSEY anti-slip system, Maximum safety is available with the integrated BESSEY anti-slip system, when clamping with a throat depth of 80 mm or more. A set screw that is molded into the sliding arm interlocks with the serration on the rail. This effectively prevents the clamp from dislodging or slipping away. Reinforced malleable iron clamps, Both the upper and lower sections are produced from high-quality malleable …

Adjustment path (mm): 35 / projection (mm): 70 / weight (kg): 0.58
Useful addition to the BESSEY door frame brace TU and TMS
High-quality 2-component plastic handles
Uncomplicated handling - even for the layman
For quick, precise alignment and fixing of door chucks

The Bessey STE Telescopic Pump Action Dry Lining Support Prop Clamp is resilient up to a maximum of 350 kg when the telescopic rod is fully retracted. It also has an extremely stable construction due to highly durable steel pipes and non-slip PVC contact surfaces. The pump allows single-handed operation thanks to 2-component plastic handle with pump mechanism. Specifications • Length: 2.5M • Minimum Length: 1450mm • Maximum Length: 2500mmFeatures & Benefits• Can be precisely set to requirements and quickly and safely released • Controllable holding force by turning the support on the grip • Extremely stable construction for up to max 200kg load-bearing capacity …

Complete clamp set in ready to GO standard systainer case
Pre-drilled holes ready for the clamps to be situated as required
Bessey AUTO height adjustable toggle clamps (6 supplied)
One size of the Bessey toggle clamp replaces multiple competitor sizes simultaneously.
Pressure on toggle clamp can be adjusted so that even sensitive workpieces, e.g. With veneered or varnished surfaces, can be gently clamped
16 piece clamp set (10 clamps and 6 adaptors) clamps supplied 4 x stc-hh50 open 40mm horizontally, height auto adjusts, clamping force 2.500 and 2 x stc-ihh25 opens to 35mm push/ pull type, clamping force 2.500 and 6 x Sets of adaptors

Clamping force up to 12,000 N For all roofing and timber frame constructions SPZ 80 K with 17 mm hexagonal bolt and heat-resistant pressure plate with sintered steel insert, which can be tilted up to 35 Hammer-in tip, First of all, the tip is driven into the rafter. The clamp is then quickly closed, to allow you to start right away with powerful clamping. Broad impact surface, The broad impact surface makes it easier to drive in the clamp. Special tilting pressure plate, With the SPZ 80 K, the special tilting pressure plate ensures problem-free clamping even when working with sloping parts. It can be tilted by up to 35. Sturdy hexagonal bolt, The SPZ 80 K's tough hexagonal bolt allows powerful …

The Bessey Variable Screw Clamps offer flexibility with large clamping widths. They have tempered spindles which are particularly sturdy and wear-resistant. This considerably increases durability. The end fastenings on both sides can be loosened without tools, enabling rapid changeover of the sliding arm for spreading tasks. It is also possible to replace the sliding arms or to add additional sliding arms easily. The U-shaped sliding arms are made from forged tempered steel which guarantees the highest level of safety and can withstand extremely large loads. They have heat-resistant pressure plates which can be tilted up to 35 for angled or sloping surfaces. Clamping force Up to 6,500N. The …

Swivel base turns 360°. Cast iron frame with anvil. Steel screws and slide bar. Jaws open to 50mm.

Light PAL-120kg - 30cm - New Item

Forged steel quick one piece clamp. -Moving jaw with crank mechanism -Forged steel. -Levered fast pressure

Excellent drill stand for wet core drilling. Clamped by 4 anchor bolts and very smooth core feed with rack pinoin drive. Features & Benefits • For wet core drilling • 4 Anchor bits and rack • Pinion feed mechanism • Mounting plate universal Specifications • Max Drill Diameter at 90°: 102mm • Column Height: 680mm • Collar Diameter: 53mm • Max Inclination: 45° • Space Saving Anchor Base: 320x230mm • Weight: 7.7kg

Color: Black/White
Size: 125mm
Sanding pad hard
2608000352
Made in Germany

Extremely robust: The drill bit offers long-lasting performance when drilling in concrete
High resistance to wear: Thanks to a highly robust tungsten carbide compound developed and manufactured by Bosch.
Extended lifetime: Effective 2-flute U-shape for good drilling residue removal and reduced friction
Certified quality: PGM guarantee offers an assurance of compliance with strict tolerances, precise drilling and tight hold in the drill chuck
The drill bit is compatible with cylindrical shank systems for corded or cordless impact drills.
Made in Germany

Extra resistant rolled steel bar 35x 8 mm Maximum pressure 9000N Throat deep 12 cm Nonslip brake on moving jaw. New fall prevention brake system More information: accesories & documents

Extra resistant rolled steel bar 35x 8 mm Maximum pressure 9000N Throat deep 12 cm Nonslip brake on moving jaw. New fall prevention brake system More information: accesories & documents