Vises & Clamps

These Faithfull Butt Welding Clamps are an essential accessory for aligning sheet metal panels edge-to-edge and surface-to-surface. They provide the correct gap to help produce clean welds, requiring more→minimal grinding after completion.The 4-piece butt welding clamps are simple to use for assembling and fabricating, and are ideal for welding patch repairs in floors, wings, door skins, or fabricating panels on reskinning projects. These versatile clamps will hold flat, curved and pressed ribbed panels. Using the Faithfull clamps to assemble the workpiece: Slacken the wing nut allowing space for the metal sheets to locate between the base of the clamp with the toggle bar underneath. Tighten the …

Pin vices are chiefly used for holding small taps, reamers, scribers or wire. The handles are tubular which permit holding wires of any length or diameter up through the length of the tool.Set of four more→: one of each size 1, 2, 3 & 4.Capacity: 1) 0 -1mm2) 0.75 - 1.5mm3) 1.5 - 3mm4) 3 - 4.5mmAdditional Information:• Capacity: 0-4.5mm

The Faithfull Forged Mini Clamp Set consists of 4 small sized G clamps. The strong and durable forged steel bodies have a powder-coated finish for increased resistance to corrosion. The handle, screw more→and swivel pad are chrome plated to resist rust. The design of the slim compact section is an advantage in a limited space. Suitable for a wide variety of metalworking, woodworking and model-making applications. Contains: 2 x Capacity: 25mm (1in), Throat: 38mm (1.1/2in) 2 x Capacity: 38mm (1.1/2in), Throat: 38mm (1.1/2in)Additional Information:• Type: Mini• Capacity: Mixed Set• Size (inches): Mixed Set• Throat Depth: Mixed Set

Faithfull Dutch Pins are used by plasterers and bricklayers to temporarily hold wooden battens, profiles or feather edges in place. Also known as a spare man, extra man or masonry clamp, this simple t more→ool is easy to use. Made from forged, hardened steel and galvanised for rust prevention. The pointed end of the shank can be hammered into plaster or cement brick/blockwork joints. The curved arm slides along the shank of the pin, jamming tight against the batten and locking it securely in place. To release, just tap the outer end of the curved arm.Additional Information:• Pack Qty.: 4

The Faithfull Clamping Squares are made from recycled HD polypropylene plastic. Easy-to-use, ideal for any 90° frames or joints. Two-handed operation designed to be used with spring clamps or any more→other one-handed clamp. Specification: Size: 200mm (8in)

The Faithfull 12-in-1 Multi-Tool has a high-quality, 60mm main blade with an ergonomic hardwood handle. It also features a selection of stainless steel multi-purpose blades featuring: 6mm flat driver/ more→bottle opener, can opener, cross head screwdriver, serrated knife, file, 3mm & 5mm flat drivers, saw and a long nose pliers with wire cutter head.Additional Information:• No. of Tools: 12

Galvanised finish with burnished screw. Specifications • Model No: 271A.80 • Clamp Capacity (Length): 80mm • Throat Depth: 67mm

Galvanised finish with burnished screw. Specifications • Model No: 271A.60 • Clamp Capacity (Length): 60mm • Throat Depth: 57mm

Galvanised finish with burnished screw. Specifications • Model No: 271A.40 • Clamp Capacity (Length): 40mm • Throat Depth: 42mm

Galvanised finish with burnished screw. Specifications • Model No: 271A.250 • Clamp Capacity (Length): 250mm • Throat Depth: 118mm

Galvanised finish with burnished screw. Specifications • Model No: 271A.200 • Clamp Capacity (Length): 200mm • Throat Depth: 108mm

Galvanised finish with burnished screw. Specifications • Model No: 271A.150 • Clamp Capacity (Length): 150mm • Throat Depth: 98mm

Galvanised finish with burnished screw. Specifications • Model No: 271A.150L • Clamp Capacity (Length): 150mm • Throat Depth: 133mm

Galvanised finish with burnished screw. Specifications • Model No: 271A.100 • Clamp Capacity (Length): 100mm • Throat Depth: 77mm

Seven precision tweezers in padded storage case. Specifications • Case Dimensions: 205mm x 130mm x 31mm • Weight: 335gContents• 140.AA Tweezers • 141.14 Tweezers • 142.1 Tweez more→ers • 142.2 Tweezers • 143 Tweezers • 144 Tweezers • 145 Tweezers • Plastic Case

Set of 3 diamond-tip contact cleaning tweezers. Specifications • Width: 1.8 - 2.9 - 4.8 mm • Length: 114 mm • Weight: 70gFeatures & Benefits• Outside-inside diamond-coated nose to more→deoxidize male and female flat connectors • Supplied in pouch

One handed Clamp set containing 2 x EZS11-4 Clamps open to 110 mm and have a clamping depth of 40mm The new EZ series of one-handed clamps from BESSEY convinces with an impressively wide range. It com more→prises the four sizes S, M, L and XL with a total of ten variants that can both clamp and spread. With opening widths from 110 mm to 900 mm, spreading widths from 80 mm to 1,090 mm and clamping forces from 200 to 2,700 N, the EZ series covers an enormous range of applications. Whether light handicraft work or heavy gluing work has to be accomplished overhead work is pending or a hand is needed to align the workpiece with the EZ clamps this is possible without any problems. Practical convenience …

The Bessey 4 Piece EZM EZL One Handed Quick Clamp Set contains two varieties of tool. It features the EZM 15-6 clamp and the EZL 30-8 clamp. EZM 15-6 Specifications • Clamping Force: 750N • more→Opening: 150mm (6") • Throat Depth: 60mm (2 -5/16") EZL30-8 Specifications • Clamping Force: 1400N • Opening: 300mm (12") • Throat Depth: 80mm (3-1/8") Features & Benefits • One-handed operation • Easily convert to a spreader • Steel bar for strength • Protective caps with crossed v grooves

These Expert Double Suction Cup Lifers are ideal for lifting and carrying awkward items such as windscreens, glass, windows and sheet metal. Specifications • Weight Capacity: 40kg • Cup Diam more→eter: 117mm

End nipperFeatures:- Semi round rigid branch for easy handling- "HF" treated cutting edges for longer lifetime and enhanced cutting performance- Max cutting capacity: 4.5 mm for soft wire and hard wir more→e 160 kg/mm²- Burnished finish with polished headSpecifications:Length: 280mmWeight: 495g

End nipperFeatures:- Semi round rigid branch for easy handling- "HF" treated cutting edges for longer lifetime and enhanced cutting performance- Max cutting capacity: 4.5 mm for soft wire and hard wir more→e 160 kg/mm²- Burnished finish with polished headSpecifications:Length: 220mmWeight: 325g

End nippersFeatures:- Semi round rigid branch for easy handling- "HF" treated cutting edges for longer lifetime and enhanced cutting performance- Max cutting capacity: 4.5 mm for soft wire and hard wi more→re 160 kg/mm²- Burnished fi nish with polished headSpecifications:Length: 220mmWeight: 325g

End nipperFeatures:- Semi round rigid branch for easy handling- "HF" treated cutting edges for longer lifetime and enhanced cutting performance- Max cutting capacity: 4.5 mm for soft wire and hard wir more→e 160 kg/mm²- Burnished fi nish with polished headSpecifications:Length: 200mmWeight: 265g