Chains & Reciprocating Saw Blades Bosch

The Optiline Wood Circular Saw Blade delivers precise quality cuts in all types of wood. Its high-quality precision-ground carbide teeth enable clean cuts, while its base blade made of dimensionally stable SK5 hardened steel (> 40 HRC) ensures accuracy. Furthermore, the blade's expansion slots lower vibration during use, which dampens noise and reduces heat development. Use this saw blade in all types of wood and wooden materials. Depending on the number of teeth, different results can be achieved with all Optiline Wood Circular Saw Blades, which feature ATB (Alternate Top Bevel) tooth geometry: when equipped with a high tooth count, the blade delivers clean cuts, whereas a low number of teeth …

Reciprocating saw blades for wood and metal.

Cutting out windows for replacement or during demolition was a tough job when it involved sawing multiple window materials such as steel-reinforced wood or plastic. Since window fixing screws started using high-tensile engineering steel, the old Bi-Metal blades don't get through a single screw.By combining longevity, efficiency and the sheer ability to get any window or door demolition job done, the Bosch EXPERT 'Window Demolition' Reciprocating Saw Blade is a firm favourite with window fitters. It even withstands contact with masonry, mortar and plaster.Features:- Long Life Cutting Window Stocks of any Material- Exceptional durability is built in with Bosch Carbide Technology.- First tooth …

For use with jigsaws with T-Shank clamping systems. The T 101 BRF Clean for Hard Wood Jigsaw Blade delivers clean straight cuts in wood. Its precision-ground teeth with taper-ground body cut cleanly. Made from BIM (bi-metal), the blade’s fully hardened HSS (high-speed steel) tooth strip is bonded with its highly elastic HCS (high carbon steel) body, making it appropriate for cutting hard materials such as hardwood and abrasive woodworking materials. Additionally, it is equipped with a reverse-tooth design for tear-free cuts at the top surface. Its fine tooth pitch (2.5 mm) cuts wooden materials with 3-30 mm thickness. T 101 BRF BIM, ground teeth and taper ground Hardwood, laminates, laminated pa…

Bosch S922AF (2608656013) Sabre Saw Blade 150mm For Metal (5 Pack) Features:
- BIM, wavy set, milled
- For thin sheet metals (0.7-3 mm), fine pipes/profiles (diameter

Bosch S922BF (2608656014) Sabre Saw Blade 150mm For Metal (5 Pack) Flexible for metal. For thick sheet metals (3-8 mm), solid pipes / profiles (diameter

Bosch S922EF (2608656015) Flexible Sabre Saw Blade For Metal 150mm (5 Pack)The  Bosch S 922 EF Flexible for Metal Reciprocating Saw Blades are optimised for a wide range of applications in metal. The BIM blade is engineered for long lifetime when cutting regular-strength steel. With a fine tooth pitch of 1.4 mm for cutting pipes/profiles (1.5-4 mm). Standard blade length (150 mm) for a 100 mm cutting capacity.
Features:
- BIM, side set, milled
- For thin sheet metals (1.5-4 mm), pipes/profiles (diameter
- Long life
- Pack of 5Specification:
- Material: BIM
- Tooth design: side set, milled
- Tooth spacing [mm] / TPI: 1.4 / 18
- Dimensions LxWxT (mm): 150x 19 x 0.9
- Areas of application: t…

These professional quality reciprocating saw blades are intended for the cutting of wood and metal The Bosch S 922 HF Flexible for Wood and Metal Reciprocating Saw Blades measure 150mm in length and are ideal for cutting wood, mild steel, non-ferrous metal and even wood with embedded nails. They feature milled, side-set teeth with a cutting capacity of up to 100mm. They are of excellent quality made from BIM for high-demand cutting. Features:
- Milled, side-set teeth for cuts without special requirements
- BIM blade is optimised to cut soft nails, mild steel materials and non-ferrous metal components embedded in wood
- Standard length (150mm) enables a cutting capacity of up to 100mm …

The Bosch T321AF Speed for Metal Jigsaw Blades deliver fast cuts in metal pipes and profilesThe Bosch T321AF Jigsaw Blades have a patented tooth geometry of aggressive and robust teeth designed to further increase cutting speeds. A Bi-Metal, fully hardened high-speed steel tooth strip and highly elastic carbon steel body make the blade breakproof. The blades have a very fine tooth pitch suited to cutting thin-wall metal pipes and profiles (1-3 mm).Features:
- T 321 AF Speed for Metal Jigsaw Blade delivers fast cuts in metal
- Patented back-taper body and thin kerf design provide unrivalled cutting speed
- Patented tooth geometry of aggressive and robust teeth further increases cutting speeds …

Sabre Saw Blade / Wood

Sabre Saw Blade / Quantity 1 Piece / 145 mm Blade Length

Saw Blade Set / Metal / Quantity 5 Piece / 132 mm Blade Length

Circular Saw Blade / 140 mm Blade Diameter / Cutting Width 2.4 mm

Not available.

For use with reciprocating saws with 1/2 inch universal shank systems. The S 918 AF Basic for Metal Reciprocating Saw Blade delivers cuts in metal. Its milled, wavy-set teeth enable cuts without special requirements. Moreover, the BIM (bi-metal) blade is engineered for long lifetime when cutting regular-strength steel materials. It is equipped with a very fine tooth pitch (1 mm) for cutting pipes and profiles with a wall thickness of 1 mm to 3 mm. Furthermore, the blade’s standard length of 150 mm enables a cutting capacity of up to 100 mm. S 918 AF BIM, wavy set, milled Thin sheet metals (1-3 mm), fine, closed pipes/profiles (diameter

For use with reciprocating saws with 1/2 inch universal shank systems. The S 918 BF Basic for Metal Reciprocating Saw Blade delivers cuts in metal. Its milled, side-set teeth enable cuts without special requirements. Moreover, the BIM (bi-metal) blade is engineered for endurance when cutting regular-strength steel materials. It is equipped with a tooth pitch of 1.8 mm for cutting pipes and profiles with a wall thickness of 2 mm to 8 mm. Furthermore, the blade’s standard length of 150 mm enables a cutting capacity of up to 100 mm. S 918 BF BIM, side set, milled Medium-thick sheet metals (2-8 mm), closed pipes/profiles (diameter

Manufactured from high quality steels to meet the demands of most industrial and DIY applications. The quality and speed of cut is dependent on the pitch and the material being cut. Lubricant or grease may be required to reduce friction and dissipate heat when cutting some materials. To be used with reciprocating and sabre saws.

Manufactured from high quality steels to meet the demands of most industrial and DIY applications. The quality and speed of cut is dependent on the pitch and the material being cut. Lubricant or grease may be required to reduce friction and dissipate heat when cutting some materials. To be used with reciprocating and sabre saws.