Drill Bits Bosch

Bosch HSS-G Extra Length 4.8mm Pack of 5 2608596819

The Forstner Bit delivers excellent lifetime for drilling accurate-fit holes. Its toothed-edge design creates less friction and heat for increased durability. The precision drill bit's short centring more→tip has two main and one periphery (toothed-edge) cutting edges for spot-on results. Equipped with large chip-free zones, which allow for optimised chip removal, the bit's fast drilling accuracy is further supported. It enables the smooth splinter-free drilling of blind holes as well as edge and slant drilling, e.g. fixing hinges, dowelling and the removal of knotholes. Use when drilling in soft and hard wood, veneered wood and non-laminated chipboard. The Forstner Bit's 3-sided shank prevents spinning …

from £12.99 up to £14.99

Bosch HSS-G 5.1mm Pack of 10 2608585491

The Long HSS Twist Drill Bit Ground is for drilling deep holes through metal with maximum precision. Its extended length makes this long bit capable of drilling deeply. The bit's exposed 135-degree se more→lf-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. The Long HSS Twist Drill Bit Ground is manufactured to DIN 340. The drill bit is Type N (flute angle) with …

from £11.50 up to £14.95

Bosch HSS-G 5.3mm Pack of 10 2608585492

The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wan more→dering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics. The HSS Twist Drill …

from £12.99 up to £14.95

Bosch Extra Length Formwork and Installation Drill 10mm 600mm

The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wan more→dering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics. The HSS Twist Drill …

from £10.99 up to £14.95

Bosch 2609390394 SDS Plus Long Life Flat Chisel 20mm x 250mm

The Installation Drill Bit is very robust for formwork. Its drill bit and shank end are screw-connected, which ensures a low risk of breakage and improves smooth-running operations. Furthermore, its t more→apered flute, offset drill bit and shank ends prevent jamming even in moist wood, while maintaining enough power to cut through embedded nails. Equipped with an extra-long shank, the bit delivers versatile drilling in multilayer building materials or sandwich materials, e.g. for building trade (formwork) and for interior fitting work, plumbing, heating and electrical installation. It is suitable for use on formwork, boards, planks, beams, plasterboard, light building materials, insulations and metal,…

from £13.87 up to £22.68

Compare prices₈→

Bosch 2609390394 SDS Plus Long Life Flat Chisel 20mm x 250mm The Bosch 2609390394 SDS+ Flat Chisel provides 30% longer lifetime and 15% higher material removal rate than standard chisels. This makes i more→t ideal for various applications in concrete with less jamming and more progress. It features self-sharpening power ribs which prevent the chisel from getting stuck. This model is long lasting and extremely durable. Features:
- SDS plus Flat Chisel is ideal for various applications in concrete with less jamming and more progress
- The self-sharpening power ribs provide a higher material removal rate and prevent the chisel from getting stuck
- Viper teeth on the chiselling edge offer increased …

Bosch HSS-G Double Ended Stub 2.5mm Pack of 10 2608597581

from £14.95 up to £15.99

Bosch HSS-R Stub 4mm Pack of 10 2608597231

The HSS Double-Ended Drill Bit Ground delivers double the drilling lifetime. The bit is usable at both ends due to two drill bit tips and flutes. It is ideally suited for assembly work, car body work more→and metal machining. It can also be used for drilling rivets or thread holes in thin-walled materials. Use this bit when drilling non-ferrous metal, sheet steel and plastics. Additionally, the bit is extra short and stable for drilling in confined spaces. Active cutting and perfect centring without wandering are achieved by the pointed split-point tip, making pre-punching unnecessary. It is intended for handheld drills (drill drivers) and drill stands.Pack of 10• Drilling with Double Lifetime• …

from £10.99 up to £14.95

Bosch HSS-G 5.2mm Pack of 10 2608595063

The HSS Stub Drill Bit is an extra-short drill bit for drilling in confined spaces, producing holes in sheet metals and pipes with a thickness of 2-6 mm. It offers a flute with an ideal working length more→for most types of tight work. An easy start without pre-punching is provided by the self-centring split-point tip, which prevents walking and enables effective drilling in areas with limited clearance. It is suitable for use on structural steel, alloyed metal, non-ferrous metal and plastics. This drill bit has a cylindrical shank system (shank equal to drill bit diameter) and is intended for use in drill stands and drill drivers. The HSS Stub Drill Bit is manufactured to DIN 1897. The drill bit …

from £11.49 up to £14.95

Bosch HSS-G 5.4mm Pack of 10 2608585493

The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wan more→dering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics. The HSS Twist Drill …

from £12.99 up to £14.95

Bosch Series 3 SDS Plus Masonry 18mm 300mm Pack of 1 SDS PLUS 3

The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wan more→dering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics. The HSS Twist Drill …

from £13.39 up to £14.95

Bosch 2608577238 PointTeQ 7.00mm HSS Twist , Pack of 10

The SDS plus-3 Drill Bit offers durability when drilling in concrete. To prevent heat development, the 4-flute dura design provides effective dust removal for increased endurance. It is made of high-a more→lloy steel, which is produced with an optimised hardening technology to withstand wear. For additional resistance, indented cutting edges are made from an ideal Bosch-controlled carbide blend. As proof of quality, the drill bit bears the test mark of the PGM Masonry Drill Bit Association Board, guaranteeing compliance with tight tolerances, exact drilling and the firm hold of fixings. The bit is intended for work on concrete and masonry and is to be used with rotary hammers with SDS plus holders.…

from £11.99 up to £15.95

Bosch 2608690167 RTec SDS-Max Pointed Chisel 400mm

HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to PointTeQ tip design Self-centering tip prevents wandering, making quick and easy drilling starts possible Increased drilling rate gen more→erates less heat and wear PointTeQ tip design remains sharp and ensures continuous durability The HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to its PointTeQ tip design. Quick and easy drilling starts are possible as the self-centering tip prevents wandering. Because of its increased drilling rate, less heat and wear are generated. The PointTeQ tip design remains sharp and ensures continuous durability. This bit is suitable for drilling clearance and pilot holes in alloyed and …

from £14.99 up to £19.95

Bosch 2608577270 PointTeQ 10.20mm HSS Twist , Pack of 5

Bosch 2608690167 RTec SDS-Max Pointed Chisel 400mm The Bosh 2608690167 SDS max RTec Speed Pointed Chisel is ideal for precision jobs in concrete, mainly demolition. Its self-sharpening twisted tip pro more→vides a wider material removal than standard chisels for smooth working with reduced interruptions and jamming. Designed to be used with SDS max shank systems. Features:
- Ideal for precision jobs in concrete and brick such as mortising, demolition and adjustment work
- You can expect less jamming than standard pointed chisels
- The self-sharpening twisted tip provides a wider material removal footprint for smooth work
- The patented RTec element delivers a higher material removal rate …

from £11.99 up to £14.99

Compare prices₂→

HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to PointTeQ tip design Self-centering tip prevents wandering, making quick and easy drilling starts possible Increased drilling rate gen more→erates less heat and wear PointTeQ tip design remains sharp and ensures continuous durability The HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to its PointTeQ tip design. Quick and easy drilling starts are possible as the self-centering tip prevents wandering. Because of its increased drilling rate, less heat and wear are generated. The PointTeQ tip design remains sharp and ensures continuous durability. This bit is suitable for drilling clearance and pilot holes in alloyed and …

Bosch 2608577314 PointTeQ 19.00mm HSS Twist (Reduced Shank)

from £14.99 up to £15.95

Bosch Professional Forstner 25 Mm Electric Planer Black One Size / EU Plug

This range of Bosch HSS drill bits have a reduced shank. Suitable for drilling clearance and pilot holes in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron and plastics. Key F more→eatures of this Bosch Reduced Shank Drill Bit: - PointTeQ tip design remains sharp and ensures continuous durability for fast drilling in metal - Increased drilling rate generates less heat and wear - Self-centering tip prevents wandering for quick and easy drilling starts - High elasticity for low risk of breakage - Black-oxide coated flute provides fast chip removal - Manufactured to DIN 338, Type N (flute angle), 135 tip

from £14.99 up to £17.99

Bosch 2608595072 HSS-G for Metal 8mm (Pack Of 5)

FEATURES:- The tooth-shaped design ensures less friction and heat, which results in a longer service life- A short center point with two main and side cutting edges for smooth, splinter-free drilling- more→Large, chip-free zones for optimized chip removal and high-speed drilling precision

from £7.24 up to £15.95

Bosch 18 x 250 x 300mm SDS-Plus 5X Hammer - 2 608 836 632

For maximum precision, choose The Bosch 2608595072 HSS-G Drill Bits for Metal Experience superior accuracy and drilling speed in metal with the Bosch 2608595072 HSS-G Metal Drill Bit set. This pack of more→five 8mm diameter drill bits delivers exceptional performance and convenience for various metalworking projects.Suitable for drilling a wide range of metals, including:
- Alloyed and non-alloyed steel
- Cast iron and cast steel
- Sintered iron and malleable cast iron
- Non-ferrous metals (aluminium, copper, etc.)
- Hard plastics
Features:
- Featuring a precision-ground design and a unique 135-degree self-centring split-point tip, these HSS bits ensure clean, accurate holes with minimal w…

from £14.99 up to £19.95

Bosch 10 x 550 x 610mm SDS-Plus 5X Hammer - 2 608 836 618- you g

SDS-plus-5X drill bits are specially designed with a centring tip for active and accurate centring in concrete. They have a 4-cutter geometry that prevents jamming in rebar and the drill bit tip does more→not break off. They have a 4-flute design for fast dust removal giving higher drilling speeds and longer life. Centring tip for active and accurate centring in concrete. The asymmetrical drilling head design is unique, ensuring outstanding dust removal and reduced wear. 4-cutter geometry prevents jamming in rebar. The drill bit tip does not break off. 4-flute design gives fast dust removal for higher drilling speed and less wear. Suitable for masonry, concrete and reinforced concrete. Appropriate …

from £14.99 up to £17.95

Bosch 1618600203 600 x 25mm SDS-Max Flat Chisel

SDS-plus-5X drill bits are specially designed with a centring tip for active and accurate centring in concrete. They have a 4-cutter geometry that prevents jamming in rebar and the drill bit tip does more→not break off. They have a 4-flute design for fast dust removal giving higher drilling speeds and longer life. Centring tip for active and accurate centring in concrete. The asymmetrical drilling head design is unique, ensuring outstanding dust removal and reduced wear. 4-cutter geometry prevents jamming in rebar. The drill bit tip does not break off. 4-flute design gives fast dust removal for higher drilling speed and less wear. Suitable for masonry, concrete and reinforced concrete. Appropriate …

from £14.99 up to £21.99

Bosch 2607017038 15 Piece X Pro Line Mixed Set

The SDS max Flat Chisel provides standard chiselling for various demolition applications in concrete and brick. Good material removal on light applications is made possible by the flat cutting edge. T more→he chisel is intended for use in applications such as mortising, demolition and adjustment work, as well as for restoring joints and clearing reinforcements. It is compatible with SDS max shank systems.

from £15.29 up to £17.49

Bosch 2608577253 PointTeQ 8.50MM HSS Twist (Pack of 10)

15 piece mixed drilling set from the Bosch Pro accessories range. Suitable for metal, wood and masonry. Neatly packaged into a durable plastic case for easy transportation and safe storage. Contents i more→nclude: 1x 3mm diameter bit for wood 1x 4mm diameter bit for wood 1x 5mm diameter bit for wood 1x 6mm diameter bit for wood 1x 8mm diameter bit for wood 1x 3mm diameter HSS-R bit for metal 1x 4mm diameter HSS-R bit for metal 1x 5mm diameter HSS-R bit for metal 1x 6mm diameter HSS-R bit for metal 1x 8mm diameter HSS-R bit for metal 1x 3mm diameter impact bit for masonry 1x 4mm diameter impact bit for masonry 1x 5mm diameter impact bit for masonry 1x 6mm diameter impact bit for masonry 1x 8mm diameter …

from £13.99 up to £22.95