Drill Bits Bosch

Bosch SDS Plus Steel Rebar Cutter 32mm 300mm Pack of 1 SDS PLUS

The SDS plus-9 RebarCutter Drill Bit is specially designed for cutting through rebar in reinforced concrete. Its firmly fixed carbide teeth are uniquely shaped to maximise drilling speed and wear resi more→stance. The bit´s steep 2+2 flute design enables optimum dust removal and long lifetime. Moreover, this flute design is also vibration-optimised for the best power transfer and speed. Additionally, a ventilation hole in the bit dissipates heat and enables metal chip removal. Do not cut through rebar unless a structural engineer issues approval. It is compatible with rotary hammers with SDS plus holders and should be used without impact. Pack of 1 • Specially Designed for Cutting Through R…

Bosch Expert SDS MAX 8X Concrete 4 Cutter Carbide Head SDS Max 1

from £74.95

Compare prices₄→

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job and it has traditionally taken its toll on hammer drill bits. Even 4-cutters wear out fast, resulting more→in downtime changing accessories and fetching supplies. The Full Carbide Head on the Expert SDS max-8x is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS max-8x lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals dr…

Bosch HSS-G Extra Length 13mm Pack of 5 2608596835

from £62.99 up to £75.95

Compare prices₅→

The Long HSS Twist Drill Bit Ground is for drilling deep holes through metal with maximum precision. Its extended length makes this long bit capable of drilling deeply. The bit's exposed 135-degree se more→lf-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. The Long HSS Twist Drill Bit Ground is manufactured to DIN 340. The drill bit is Type N (flute angle) with …

Bosch Professional Expert Sds Max-8x 30x200x320 Mm Wall Hammer Drill Bit S

from £70.49 up to £76.95

Compare prices₅→

The BOSCH PROFESSIONAL Expert SDS Max-8x 30x200x320 mm Wall Hammer Drill Bit Grey is a high-quality and durable tool designed for professional use. It is an essential accessory for electric tools, spe more→cifically designed to be used with hammer drills.This drill bit features an SDS Max-8x system, which ensures a secure and reliable connection between the bit and the drill. It has a cutting diameter of 30mm, a length of 200mm, and an overall length of 320mm, making it suitable for drilling into thick walls and big holes.The drill bit is made from high-grade steel, which makes it extremely sturdy and resistant to wear and tear. Its grey color adds a sleek and professional look to the tool. The design …

Bosch Expert SDS MAX 8X Concrete 4 Cutter Carbide Head SDS Max 2

from £71.99 up to £77.95

Compare prices₅→

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job and it has traditionally taken its toll on hammer drill bits. Even 4-cutters wear out fast, resulting more→in downtime changing accessories and fetching supplies. The Full Carbide Head on the Expert SDS max-8x is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS max-8x lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals dr…

Bosch 2608685877 SDS max-4 Masonry 40 x 400 x 520mm

from £54.99 up to £119.99

Compare prices₈→

Bosch 2608685877 SDS max-4 Masonry Drill Bit compatible with all rotary hammers with SDS max holders The Bosch 2608685877 is a single SDS Max-4 drill bit with a diameter of 40.0mm and a working depth more→of 400mm. The drill bit is best suited to drilling concrete and masonry. They feature a 4-cutter design that prevents jamming when drilling rebar and a 2-flute U-shape that provides good dust removal. This model is compatible with all rotary hammers with an SDS max holder and is extremely durable thanks to its carbide construction. Features:
- Ideal for use in concrete and masonry
- Compatible with all rotary hammers with SDS max holders
- 2-flute U-shape also lengthens life while offering …

Bosch SDS Plus 5 Masonry 22mm 1000mm Pack of 1

from £57.57 up to £78.95

Compare prices₇→

The SDS plus-5 Drill Bit allows for effortless drilling. For smooth work, the carbide plate is grooved and bears notches that penetrate material more easily and prevent jamming in concrete. Drill guid more→ance for easy starts without jarring or wandering is provided by the Activeteq centring tip, which keeps the drill in place for a precise hole diameter. Furthermore, AWB brazing and hardening technology reduces vibration during drilling to minimise strain on the user. The bit is intended for use on masonry and concrete. To achieve accurate results, the visibility of the wear mark indicates if the diameter of the hole is still in tolerance for metal anchor setting. As proof of quality, the drill …

Bosch HSS-Co Cobalt 12.5mm Pack of 5

from £44.35 up to £78.95

Compare prices₆→

The HSS Twist Drill Bit Cobalt provides long-lasting performance when drilling stainless steel. This extended lifetime results from a cobalt alloy content of 5% and fully ground HSS (high-speed steel) more→, which provides excellent surface quality, wear resistance and heat protection. Equipped with two cutters and two flutes, chips are removed quickly to make the bit last even longer. This drill bit works with alloyed and non-alloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steels. The HSS Twist Drill Bit Cobalt is manufactured to DIN 338. The drill bit is Type N (flute angle) with a 135-degree tip and a diameter tolerance of h8. Active cutting and perfect centring …

Bosch Universal Diamond Dry Core Cutter 127mm 2608587343

from £73.76 up to £79.99

Compare prices₆→

It is suitable for use with diamond drilling tools. The Standard for Universal Diamond Dry Core Cutter delivers reliable drilling in masonry. Its segments are laser-welded to ensure durability and ena more→ble dry masonry drilling for joint boxes, socket outlets, sanitary delivery pipes, etc. This Dry Core Cutter is intended for such building materials as limestone, brick and masonry.Diamond dry core cutter G 1/2"• Reliable Drilling in Masonry• Standard for Universal Diamond Dry Core Cutter delivers reliable drilling in masonry• Segments are laser-welded to ensure durabilitySpecifications:Diameter mm: 127Working length mm: 150Number of segments: 6Segment height mm: 7,0Materials:StoneMaterials …

Bosch Professional Expert 22x550x600 Mm Drill Bit Silver 2608900148

from £63.99 up to £78.95

Compare prices₅→

Drilling Through Reinforced Concrete Is A Difficult Task That Demands A Lot From The Drills. Normal Drills With Two Cutting Edges Get Stuck In The Reinforcement And Break Off. The Solid Carbide Head O more→n The Expert Sds Plus-7x Is An Advanced 4-Cutter Made From A Single Piece Of The Hardest Metal: It Does Not Jam And Shows No Weakness When Hammer Drilling.Features:- For Hammer Drills- Lasts Up To 3 Times Longer Than Standard Drills- Outstanding Durability In Reinforced Concrete- Extremely Durable Drill Tip With Bosch Carbide Technology- Penetrates Reinforced Concrete By Means Of 4 Cutting Edges Solid Carbide Head- Suitable For All Sds Plus Hammer DrillsIdeal For Drilling Holes In:- Cured Concrete- …

Bosch Expert 7X 4-Cutter Head 3X Life SDS Plus Masonry 6mm 215mm

from £79.95

Compare prices₄→

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job, and it has traditionally taken its toll on drill bits. Regular two-cutter bits get stuck in rebar an more→d they eventually break. The Full Carbide Head on the Expert SDS plus-7X is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS plus-7X lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals drilling concrete an…

Bosch Expert SDS MAX 8X Concrete 4 Cutter Carbide Head SDS Max 1

from £72.99 up to £79.95

Compare prices₅→

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job and it has traditionally taken its toll on hammer drill bits. Even 4-cutters wear out fast, resulting more→in downtime changing accessories and fetching supplies. The Full Carbide Head on the Expert SDS max-8x is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS max-8x lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals dr…

Bosch 4 Piece Diamond Set 2607019881

from £79.95

Compare prices₅→

The Diamond Wet Drill Bit delivers long life when drilling hard ceramics. Its high-class diamond coating makes the bit very robust and wear-resistant, allowing for extended usage. The product is inten more→ded for a variety of materials from soft wall tiles to very hard floor tiles such as fine stoneware. This robust and compact set features a transparent storage box providing a good overview of its contents as well as safe storage and transport. Do not drill in impact mode. Use water cooling when operating drills with this product. It is suitable for use with cordless drills. 4-piece Robust Line diamond wet drill bit set • Long Life for Hard Ceramics • Diamond Wet Drill Bit delivers long …

Bosch 2608685875 SDS max-4 Hammer For Masonry 32 x400 x520mm

from £35.99 up to £79.99

Compare prices₈→

Bosch 2608685875 SDS max-4 Hammer Drill Bit ideal for concrete and masonry The Bosch 2608685875 is a single SDS Max-4 drill bit with a diameter of 32.0mm and a working depth of 400mm. The drill bit is more→best suited to drilling concrete and masonry. They feature a 4-cutter design that prevents jamming when drilling rebar and a 2-flute U-shape that provides good dust removal. This model is compatible with all rotary hammers with an SDS max holder and is extremely durable thanks to its carbide construction. Features:
- Ideal for use in concrete and masonry
- Compatible with all rotary hammers with SDS max holders
- 2-flute U-shape also lengthens life while offering good dust removal
- 4-cutter …

Bosch 32mm Professional SDS-Max-4 M4 Hammer . 370mm Long (2608685

from £40.95 up to £79.99

Compare prices₅→

Bosch SDS MAX masonry drill bits with Quadro-X drilling head with four cutter geometry for the toughest applications. Features and Benefits 4-cutter, vacuum brazing and hardening. Long lifetime/No jam more→ming in rebar. Highly durable carbide. Good lifetime/wear resistance. Suitable for concrete and reinforced concrete and masonry. Can be used in all rotary hammers with SDS-max holder

Bosch SDS Max 49 Tooth Bush Hammer Head 1618623206

from £60.99 up to £80.95

Compare prices₆→

It is compatible with Toolholder 1 618 609 003 with SDS max shank system. The SDS max Bush Hammer Head for Toolholders is ideal for roughing up stone, concrete and asphalt. This hammer head has a toot more→h design especially suitable for adding texture to smooth surfaces.Bush hammer head for toolholder 1 618 609 003The SDS max bush hammer head is ideal for roughing up stone, concrete and asphalt• Roughing Up Stone, Concrete and Asphalt• SDS max Bush Hammer Head for Toolholders is ideal for roughing up stone, concrete and asphalt• Tooth design is especially suitable for adding texture to smooth surfacesSpecifications:Dimensions mm: 60 x 60Number of teeth: 7 x 7Materials:ConcreteMaterials …

Bosch Extension 1 1/4 UNC for Diamond Core Cutters 300mm 2608598044

from £80.95 up to £89.99

Compare prices₅→

Extension for core cutters with G 1/2" fittingas of diameter 32 mmSpecifications:Length mm: 300

Bosch Expert SDS MAX 8X Concrete 4 Cutter Carbide Head SDS Max 1

from £80.95

Compare prices₄→

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job and it has traditionally taken its toll on hammer drill bits. Even 4-cutters wear out fast, resulting more→in downtime changing accessories and fetching supplies. The Full Carbide Head on the Expert SDS max-8x is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS max-8x lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals dr…

Bosch Expert SDS MAX 8X Concrete 4 Cutter Carbide Head SDS Max 2

from £73.99 up to £80.95

Compare prices₅→

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job and it has traditionally taken its toll on hammer drill bits. Even 4-cutters wear out fast, resulting more→in downtime changing accessories and fetching supplies. The Full Carbide Head on the Expert SDS max-8x is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS max-8x lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals dr…

Bosch SDS PLUS 9 SpeedClean Hollow Masonry 20mm 450mm

from £82.00

Compare prices₅→

The SDS plus-9 Speed Clean Drill Bit is available as 4-cutter for bigger diameters and as 2-cutter for smaller diameters and features an accurate centring tip. To achieve accurate results, the visibil more→ity of the wear mark indicates if the diameter of the hole is still in tolerance for metal anchor setting. It is made in Germany. It is compatible with rotary hammers with SDS plus shanks and works in combination with industrial M-class vacuum cleaners. The SDS plus-9 Speed Clean Drill Bit allows for dustless drilling. While working, the built-in vacuum attachment pulls dust though extraction holes in the drill bit, allowing optimum material removal without additional steps. This technology results …

Bosch Expert 7X 4-Cutter Head 3X Life SDS Plus Masonry 12mm 165m

from £81.95

Compare prices₄→

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job, and it has traditionally taken its toll on drill bits. Regular two-cutter bits get stuck in rebar an more→d they eventually break. The Full Carbide Head on the Expert SDS plus-7X is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS plus-7X lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals drilling concrete an…

Bosch Expert SDS MAX 8X Concrete 4 Cutter Carbide Head SDS Max 3

from £74.99 up to £81.95

Compare prices₅→

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job and it has traditionally taken its toll on hammer drill bits. Even 4-cutters wear out fast, resulting more→in downtime changing accessories and fetching supplies. The Full Carbide Head on the Expert SDS max-8x is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS max-8x lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals dr…

Bosch 13mm 1/2" 20 UNF Keyless Chuck and SDS Plus Adaptor 13mm 1/2" x 20UN

from £30.00 up to £82.99

Compare prices₈→

The Keyless Drill Chuck offers comfortable, keyless operation for maximum ease of use. It allows for easy and fast two-handed clamping without using a key and securely fastens cylindrical or hex shank more→drill bits. 2-sleeved keyless drill chucks are available with different mounts (1/2" - 20, 3/8"- 24, 5/8" -16, 1/4" external hex shank, B16, and SDS plus) and are compatible with most common drills without spindle lock. Check technical details for information regarding impact resistance or suitability for anti-clockwise rotation.SDS plus keyless chuck• Comfortable, Keyless Two-Hand-Operated Clamping for Maximum Ease of Use• Keyless Drill Chuck offers comfortable, keyless operation for …

Bosch Expert SDS MAX 8X Concrete 4 Cutter Carbide Head SDS Max 2

from £84.95

Compare prices₄→

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job and it has traditionally taken its toll on hammer drill bits. Even 4-cutters wear out fast, resulting more→in downtime changing accessories and fetching supplies. The Full Carbide Head on the Expert SDS max-8x is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS max-8x lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals dr…