Drill Bits Bosch

The HSS Stub Drill Bit is an extra-short drill bit for drilling in confined spaces, producing holes in sheet metals and pipes with a thickness of 2-6 mm. It offers a flute with an ideal working length for most types of tight work. An easy start without pre-punching is provided by the self-centring split-point tip, which prevents walking and enables effective drilling in areas with limited clearance. It is suitable for use on structural steel, alloyed metal, non-ferrous metal and plastics. This drill bit has a cylindrical shank system (shank equal to drill bit diameter) and is intended for use in drill stands and drill drivers. The HSS Stub Drill Bit is manufactured to DIN 1897. The drill bit …

This drill bit has a hexagonal shank system and works with all drill drivers with a 13-mm chuck. The Auger Bit is ideal for fast drilling-accuracy when producing through-holes, pre-drilling for rafter nails and drilling deep dowel holes in wood. The heavy-duty self-feeding tip pulls the bit through completely, which allows for quick and effortless precision-drilling. Straight holes and a high chip removal rate and increased speed are made possible by the bit's optimised low-friction flute geometry with a solid centre. Its optimised scoring spur and precision-ground main cutting edge produce accurate holes. It is ideal for use in the ancillary building trades, for carpenters and roofers, and …

The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics. The HSS Twist Drill …

The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics. The HSS Twist Drill …

For wood and metal
4 sheets of sanding paper 70mm x 125mm
Sanding plate
Sanding round wood and painted surfaces up to 55 mm diameter
Sanding pipes and spherical surfaces
Color: MultiColored
With Velcro (2x80 / 2x120 grit)

The BOSCH PROFESSIONAL SDS Max-4 12x200x340 mm Wall Hammer Drill Bit is a high-quality and durable drilling tool designed for heavy-duty use in construction and renovation projects. This drill bit is specifically engineered for use with SDS Max power tools, ensuring compatibility and optimal performance.The bit's diameter measures 12mm, making it suitable for drilling medium-sized holes in various materials, including concrete, stone, and masonry. Its length of 200mm provides sufficient depth for most applications, while the overall length of 340mm allows for a comfortable grip and precise control during drilling.The drill bit features a sleek grey color scheme, adding a professional look to …

The CYL-3 Drill Bit provides lasting performance when drilling concrete. Its stamina is a result of a highly durable carbide blend specially developed and manufactured by Bosch. The blend is adapted to meet the demands of repeated use and offers high wear resistance when working with concrete. Moreover, the effective 2-flute U-shape design of the bit provides good dust removal, reducing friction, heat development and wear, resulting in an extended lifetime. The bit delivers lasting performance when drilling holes for fixings in abrasive materials such as concrete and natural stone. As proof of quality, the drill bit bears the test mark of the PGM Masonry Drill Bit Association Board, guaranteeing …

Bosch 2608836641 SDS+ 5X Masonry Drill Bit 20 x 400 x 450mmThe Bosch 2608836641 is a single SDS Plus-5X drill bit with a diameter of 20.0mm and a working depth of 400mm. SDS Plus bits offer highly efficient drilling in reinforced concrete and masonry. They have a 4-flute design which provides fast dust removal so the bit can slice through concrete and rebar quickly with reduced wear. The centring tip prevents wandering and geometrical form prevents jamming.Features:
- SDS plus-5X Drill Bit offers highly efficient drilling in reinforced concrete
- Geometrical form of the 4-cutter head prevents jamming and breakage for optimal results
- “Turn-angle” head and 4-flute design provide fast dust…

The Sds Max Hollow Gouging Chisel Is Ideal For Easily Cutting Narrow Channels In Concrete, And Can Also Be Used In Brick. It Is Compatible With Sds Max Shank Systems.Specifications:- Length: 300 Mm

HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to PointTeQ tip design Self-centering tip prevents wandering, making quick and easy drilling starts possible Increased drilling rate generates less heat and wear PointTeQ tip design remains sharp and ensures continuous durability The HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to its PointTeQ tip design. Quick and easy drilling starts are possible as the self-centering tip prevents wandering. Because of its increased drilling rate, less heat and wear are generated. The PointTeQ tip design remains sharp and ensures continuous durability. This bit is suitable for drilling clearance and pilot holes in alloyed and …

HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to PointTeQ tip design Self-centering tip prevents wandering, making quick and easy drilling starts possible Increased drilling rate generates less heat and wear PointTeQ tip design remains sharp and ensures continuous durability The HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to its PointTeQ tip design. Quick and easy drilling starts are possible as the self-centering tip prevents wandering. Because of its increased drilling rate, less heat and wear are generated. The PointTeQ tip design remains sharp and ensures continuous durability. This bit is suitable for drilling clearance and pilot holes in alloyed and …

Bosch 2608836644 SDS+ 5X Hammer Drill Bit 22mm x 200mm x 250mmThe Bosch 2608836644 is a single SDS Plus-5X drill bit with a diameter of 22mm and a working depth of 200mm. SDS Plus bits offer highly efficient drilling in reinforced concrete and masonry. They have a 4-flute design which provides fast dust removal so the bit can slice through concrete and rebar quickly with reduced wear. The centring tip prevents wandering and geometrical form prevents jamming.Features:
- SDS plus-5X Drill Bit offers highly efficient drilling in reinforced concrete
- Geometrical form of the 4-cutter head prevents jamming and breakage for optimal results
- “Turn-angle” head and 4-flute design provide fast dust…

HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to PointTeQ tip design Self-centering tip prevents wandering, making quick and easy drilling starts possible Increased drilling rate generates less heat and wear PointTeQ tip design remains sharp and ensures continuous durability The HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to its PointTeQ tip design. Quick and easy drilling starts are possible as the self-centering tip prevents wandering. Because of its increased drilling rate, less heat and wear are generated. The PointTeQ tip design remains sharp and ensures continuous durability. This bit is suitable for drilling clearance and pilot holes in alloyed and …

Bosch 2608690101 SDS Plus Spade Chisel 40 x 250mm The Bosch 2608690101 SDS Plus Spade Chisel is the ultimate solution for removing roughcasting, layers of dirt and concrete residue. It provides a 30% higher material removal rate than standard chisels, saving you time and effort whilst increasing productivity. The self-sharpening body provides consistent work progress as well as long-lasting sharpness for the toughest tasks. Features:
- Designed for use in masonry and mortar though is best suited to removing roughcasting, layers of dirt, concrete residue from foamwork boards, plaster from walls and for breakthroughs in masonry
- 30% higher material removal rate than standard chisels
- …

The SDS plus-3 Drill Bit offers durability when drilling in concrete. To prevent heat development, the 4-flute dura design provides effective dust removal for increased endurance. It is made of high-alloy steel, which is produced with an optimised hardening technology to withstand wear. For additional resistance, indented cutting edges are made from an ideal Bosch-controlled carbide blend. As proof of quality, the drill bit bears the test mark of the PGM Masonry Drill Bit Association Board, guaranteeing compliance with tight tolerances, exact drilling and the firm hold of fixings. The bit is intended for work on concrete and masonry and is to be used with rotary hammers with SDS plus holders.…

The Adapter for Diamond Core Cutters is a system part that ensures compatibility between diamond drilling tools and core bits. Close attention must be paid to information on the machine holder and the core cutter holder in order to select the correct adapter. • Ensures Compatibility Between Diamond Drilling Tools and Core Bits • Adapter for Diamond Core Cutters is a system part that ensures compatibility in diamond drilling tools and core bits • Close attention must be paid to information on machine and core cutter holder in order to select the correct adapter Specifications: Adapter for machine side: Hexagonal Adapter for core side: G 1/2" Total length mm: 88

Exceptionally Durable Drill Bit With Bosch Carbide Technology.Features:- Outstanding Durability In Reinforced Concrete- Long-Lasting Drill Bit Thanks To Bosch Carbide Technology- Penetrates Reinforced Concrete With 4 Cutting Edges Solid Carbide Head- Suitable For All Sds Plus Hammer Drills- Suitable For The Following Materials: Soft Stone, Hard Stone, Concrete, Reinforced Concrete, Concrete BlocksSpecifications:Material:- Field Of Application: Stone / Concrete- Tool Mounting System: Sds-Plus- Diameter (Mm): 14- Overall Length (Mm): 315- Working Length (Mm): 250Type- Type: Hammer DrillGeneral- Material: Carbide- Size (L X W X H In Mm): 315 X 14 X 14- Weight (G): 205

The SDS plus-3 Drill Bit offers durability when drilling in concrete. To prevent heat development, the 4-flute dura design provides effective dust removal for increased endurance. It is made of high-alloy steel, which is produced with an optimised hardening technology to withstand wear. For additional resistance, indented cutting edges are made from an ideal Bosch-controlled carbide blend. The bit is intended for work on concrete and masonry and is to be used with rotary hammers with SDS plus holders. As proof of quality, the drill bit bears the test mark of the PGM Masonry Drill Bit Association Board, guaranteeing compliance with tight tolerances, exact drilling and the firm hold of fixings.…

The SDS plus-3 Drill Bit offers durability when drilling in concrete. To prevent heat development, the 4-flute dura design provides effective dust removal for increased endurance. It is made of high-alloy steel, which is produced with an optimised hardening technology to withstand wear. For additional resistance, indented cutting edges are made from an ideal Bosch-controlled carbide blend. As proof of quality, the drill bit bears the test mark of the PGM Masonry Drill Bit Association Board, guaranteeing compliance with tight tolerances, exact drilling and the firm hold of fixings. The bit is intended for work on concrete and masonry and is to be used with rotary hammers with SDS plus holders.…

Features:Expert Sds Plus-7x For Long Life Drilling Reinforced Concrete:- Drilling through reinforced concrete is a tough job, and it has traditionally taken its toll on drill bits. Regular two-cutter bits get stuck in rebar and they eventually break. The Full Carbide Head on the EXPERT SDS plus-7X is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn't jam and presents no weakness on impact.- For construction professionals drilling concrete and reinforced concrete regularly, for example for fixings and installations, the Bosch EXPERT SDS plus-7X Hammer Drill Bit offers peerless performance, reliability and longevity. It is THE EXPERT accessory for SDS plus rotary …

This drill bit has a hexagonal shank system and works with all drill drivers with a 13-mm chuck. The Auger Bit is ideal for fast drilling-accuracy when producing through-holes, pre-drilling for rafter nails and drilling deep dowel holes in wood. The heavy-duty self-feeding tip pulls the bit through completely, which allows for quick and effortless precision-drilling. Straight holes and a high chip removal rate and increased speed are made possible by the bit's optimised low-friction flute geometry with a solid centre. Its optimised scoring spur and precision-ground main cutting edge produce accurate holes. It is ideal for use in the ancillary building trades, for carpenters and roofers, and …

This drill bit has a hexagonal shank system and works with all drill drivers with a 13-mm chuck. The Auger Bit is ideal for fast drilling-accuracy when producing through-holes, pre-drilling for rafter nails and drilling deep dowel holes in wood. The heavy-duty self-feeding tip pulls the bit through completely, which allows for quick and effortless precision-drilling. Straight holes and a high chip removal rate and increased speed are made possible by the bit's optimised low-friction flute geometry with a solid centre. Its optimised scoring spur and precision-ground main cutting edge produce accurate holes. It is ideal for use in the ancillary building trades, for carpenters and roofers, and …

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job, and it has traditionally taken its toll on drill bits. Regular two-cutter bits get stuck in rebar and they eventually break. The Full Carbide Head on the Expert SDS plus-7X is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS plus-7X lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals drilling concrete an…

The Bosch 2608690091 SDS Plus Tile Chisel delivers clean and fast removal of wall and floor tiles
The Bosch 2608690091 is a 40mm wide Tile Chisel with an SDS Plus Shank and an overall length of 260mm. It has been designed for Rotary Hammer Drills and Demolition Hammers. SDS Plus Tile Chisels have an angled cutting edge and self-sharpening design that offers a long life with a 30% higher material removal rate than standard chisels. Compatible with an SDS plus chisel attachment or it can be used directly in SDS plus hammers with a rotation stop.Features:
- Self-sharpening spade body retains uniform thickness throughout its lifetime for consistently high removal rates

- Angled cutting edge, se…