Other Sound & Hi-Fi Celestion

15 Watt. 8 Ohms, Guitarspeaker. Frequency range 755000 Hz, Weight 4,2 Kg, Made in England
Magnet Type: Alnico
Power (Watt): 15.0
Weight: 4,2 kg
Sensitivity: 100 dB
Impeda more→nce: 8 Ohm
Made in: United Kingdom
Sensitivity (dB): 100.0
Power: 15 W
Frequency Range: 75 Hz - 5 kHz
Diameter (inch): 12.0
Diameter: 12"
Type: Guitar Loudspeaker

Cut out diameter- 229mm, Ceramic Magnet, 10" Chassis with 8 Ohm, Voice Coil 1,75", Sensitivity 97dB, Frequency 100Hz-5,5kHz, 60 Watt RMS, weight 2,4Kg
Frequency Range: 100 Hz - 5,5 kHz
Sen more→sitivity: 97 dB
Weight: 2,4 kg
Made in: Hong Kong
Diameter: 10"
Diameter (inch): 10.0
Power (Watt): 60.0
Magnet Type: Ceramic
Sensitivity (dB): 97.0
Power: 60 W
Impedance: 8 Ohm
Type: Guitar Loudspeaker

Loudspeaker-type low-frequency 8” driver that provides 94dB sensitivity and 100Wrms (AES standard) power handling. It features a pressed steel chassis, a ferrite magnet, a Kevlar loaded paper cone and more→a 1.75” high temperature copper voice coil wound on polyimide former for increased reliability. It achieves optimal performance in compact enclosures and delivers an exceptional performance through bass and mid-range – it is ideal for two-way systems. Nominal impedance: 8 Ohm. Frequency range: 70 Hz-6 kHz. Unit weight: 2.3 kg.
Frequency Range: 70 Hz - 6 kHz
Type: PA
Weight: 2,3 kg
Power RMS: 100 W
Made in: China
Impedance: 8 Ohm
Power (Watt): 200.0
Sensitivity: 94 dB
Power: 200 W
Power RMS (Watt)…

12” bass and mid-range driver that provides 97dB sensitivity and 250W RMS (AES standard) power handling, and features a 2.5” high temperature copper voice coil wound on polyimide for increased reliabi more→lity. Optimised ferrite magnet design reduces weight, while double-roll cloth-sealed surround ensures greater excursion control. This driver is perfect for use in two-way or compact three-way systems. It features rugged pressed steel chassis, Kevlar loaded paper cone and a polyimide former. Nominal impedance: 8 Ohm. Frequency range: 50 Hz-4 kHz. Overall depth: 130 mm. Cut-out diameter: 283 mm. Unit weight: 4.1 kg.
Sensitivity: 97 dB
Power RMS: 250 W
Power (Watt): 500.0
Power RMS (Watt): 250.0…

A closed back makes the steel chassis TF0615MR a dedicated mid-range PA speaker, eliminating the need for a separate mid-range enclosure when dropped into a 3-way cabinet. Optimised to deliver detaile more→d reproduction of mid-range frequencies from 500 Hz to 5000 Hz, this 6” diameter speaker provides 100 W continuous power handling (50 W RMS AES standard) and 97 dB sensitivity. Closed back midrange unit.
Diameter: 6"
Power: 100 W
Impedance: 8 Ohm
Diameter (inch): 6.0
Sensitivity: 97 dB
Power RMS (Watt): 50.0
Made in: China
Type: Speaker unit
Magnet Type: Ferrite
Frequency Range: 500 Hz - 5 kHz
Power RMS: 50 W
Weight: 2,0 kg
Power (Watt): 100.0…

Hear every high frequency within your sound. The Celestion CDX1-1010 compression driver has a 1 copper-clad aluminium voice coil with a ferrite magnet. Designed to deliver pristine highs that compleme more→nt well-defined low frequencies. Guaranteed to project your sound without sacrificing the quality. The CDX1-1010 has a nominal impedance of 8 ohms and is capable of handling 15 watts of continuous power. Installation is quick and simple - the driver just screws into the speaker enclosure. If youre looking to replace a blown tweeter or improve the sonic ability of your loudspeaker the Celestion CDX1-1010 is the perfect choice.

1" exit ferrite magnet compression driver.Single piece PETP diaphragm and surround2,200 Hz recommended min. crossover freq (12dB/oct)
Frequency Range: 1500 Hz - 20 kHz
Power RMS (Watt): 12 more→.0
Diameter: 1"
Power: 24 W
Power (Watt): 24.0
Sensitivity: 106 dB
Weight: 1,0 kg
Magnet Type: Ferrite
Impedance: 8 Ohm
Power RMS: 12 W
Type: PA
Diameter (inch): 1.0
Made in: China

1" exit neodymium magnet compression driver.Aluminium diaphragm with elastomer surroundCopper inductance sleeve for improved HF performance2,500Hz recommended min. crossover freq (12dB/oct)
Magn more→et Type: Neodymium
Type: PA
Sensitivity: 108 dB
Power (Watt): 25.0
Diameter: 1"
Power RMS: 25 W
Weight: 0,5 kg
Impedance: 8 Ohm
Power RMS (Watt): 25.0
Diameter (inch): 1.0
Power: 25 W
Made in: China
Frequency Range: 2000 Hz - 20 kHz

1" exit neodymium magnet compression driver.Maximum modal suppression phase plugDeep-drawn titanium diaphragm with polyamide surround1,500Hz recommended min. crossover freq (12dB/oct)
Impedance: more→8 Ohm
Diameter: 1"
Frequency Range: 800 Hz - 20 kHz
Power: 100 W
Diameter (inch): 1.0
Made in: China
Power (Watt): 100.0
Power RMS: 50 W
Weight: 0,75 kg
Power RMS (Watt): 50.0
Type: PA
Magnet Type: Neodymium
Sensitivity: 107 dB

CDX1-1730 features a neodymium magnet, which results in a reliable and high quality HF compression driver with a massive 70% reduction in weight compared to a ferrite device with the same output. Prov more→iding 80 W continuous power handling (40 W RMS AES standard) and 110 dB sensitivity. CDX1-1730 features Celestion’s proprietary Sound Castle clamping system for greatly reduced distortion and increased lifespan.
Power (Watt): 100.0
Made in: China
Diameter (inch): 1.0
Power RMS: 50 W
Weight: 0,6 kg
Sensitivity: 108 dB
Magnet Type: Neodymium
Power: 100 W
Power RMS (Watt): 50.0
Frequency Range: 2000 Hz - 20 kHz
Type: PA
Diameter: 1"
Impedance: 8 Ohm…

Superb design and high build quality makes this well-established ferrite magnet compression driver ultra-reliable. Ideal as a drop-in replacement HF driver used with two-way and three-way cabs, CDX1-1 more→745 provides 80 W continuous power handling (40W RMS AES standard) and 110 dB sensitivity. Features Celestion’s proprietary Sound Castle clamping system for greatly reduced distortion and increased lifespan.
Weight: 3,0 kg
Power: 80 W
Power (Watt): 80.0
Power RMS: 40 W
Made in: China
Magnet Type: Ferrite
Sensitivity: 110 dB
Diameter: 1"
Diameter (inch): 1.0
Power RMS (Watt): 40.0
Type: PA
Impedance: 16 Ohm
Frequency Range: 1200 Hz - 20 kHz…

1” exit, ferrite magnet compression driver with 1.75” edge-wound copper clad aluminium voice coil and one-piece PETP diaphragm and surround that provides 40W RMS power handling (AES standard) and 110d more→B sensitivity. It features the Sound Castle clamping, which ensures even pressure on diaphragm assembly for reduced distortion. The Finite Element Analysis (FEA) is used to optimise both magnet assembly and acoustic design. Nominal impedance: 8 Ohm. Frequency range: 1.2-20 kHz. Unit weight: 3 kg.
Diameter (inch): 1.0
Impedance: 8 Ohm
Type: PA
Sensitivity: 110 dB
Power (Watt): 80.0
Diameter: 1"
Magnet Type: Ferrite
Power: 80 W;40 W
Weight: 3,0 kg
Power RMS: 40 W;20 W
Made in: China
Power RMS (Wat…

1" exit neodymium magnet compression driver.2,200 Hz recommended min. crossover freq (12 dB/oct)Single piece PETP film diaphragm and surroundSound Castle diaphragm assemblyScrew fitting
Power: 8 more→0 W
Sensitivity: 110 dB
Diameter: 1"
Weight: 0,75 kg
Magnet Type: Neodymium
Power (Watt): 80.0
Impedance: 8 Ohm
Frequency Range: 1200 Hz - 20 kHz
Power RMS (Watt): 40.0
Made in: China
Type: PA
Power RMS: 40 W
Diameter (inch): 1.0

Hear every detail within the high frequencies of your sound. The Celestion CDX14-3040 compression driver has a 3 copper-clad aluminium voice coil with a neodymium magnet. Delivering an extended freque more→ncy response with detail and definition. Guaranteed to project your sound. Every delicate nuance is faithfully reproduced - from the crystal-clear highs to the well-defined midrange. The CDX14-3040 has a nominal impedance of 8 ohms and is capable of handling 75 watts of continuous power. If youre looking to replace a blown tweeter or improve the sonic ability of your loudspeaker the Celestion CDX14-3040 is the perfect choice.

10", cast aluminium chassis, ferrite magnet mid/bass driver. Balanced airflow venting provides enhanced cooling. Twin demodulation rings.
Impedance: 8 Ohm
Frequency Range: 60 Hz - 5 kHz more→/> Power (Watt): 600.0
Diameter (inch): 10.0
Type: Speaker unit
Sensitivity: 99 dB
Power RMS (Watt): 300.0
Power RMS: 300 W
Made in: China
Power: 600 W
Weight: 5,5 kg
Diameter: 10"
Magnet Type: Ferrite

Optimized flux distribution in the magnet assembly provides exceptionally low harmonic distortion, for detailed sound reproduction. This 8” cast frame, ferrite magnet loudspeaker is ideal for us more→e as a bass/mid driver in 2-way sound reinforcement cabinets, delivering 400 W continuous power handling (200 W RMS AES standard) and 93 dB sensitivity.
Power RMS (Watt): 200.0
Diameter: 8"
Weight: 3,8 kg
Power (Watt): 400.0
Sensitivity: 93 dB
Made in: China
Type: Speaker unit
Frequency Range: 70 Hz - 6 kHz
Diameter (inch): 8.0
Impedance: 8 Ohm
Power: 400 W
Power RMS: 200 W
Magnet Type: Ferrite

With 700 W continuous power handling (350W RMS AES standard), this robust, cast aluminium replacement driver has been designed for superior sound reinforcement. Purpose-built for mid/bass applications more→, it really comes into its own when used with compact 12” enclosures. The efficient, Finite Element Analysis-optimised magnet structure delivers high BL (magnetic flux) for a tight, controlled low end performance that delivers truly detailed, high-definition sound reproduction.
Diameter: 12"
Sensitivity: 96 dB
Power RMS (Watt): 350.0
Power RMS: 350 W
Type: Speaker unit
Power (Watt): 700.0
Magnet Type: Ferrite
Made in: China
Weight: 6,3 kg
Frequency Range: 40 Hz - 4 kHz
Power: 700 W
Impedance: …

6.5'' coaxial loudspeaker providing 150Wrms (AES standard) power handling and 92dB sensitivity. Full range frequency response: 110 – 20,000Hz. FEA (Finite Element Analysis) optimized ferrite magnet as more→sembly acts as common motor for both LF and HF drivers resulting in enhanced coherence. Robust cast aluminum chassis is designed to minimize unwanted reflections, further reducing acoustic distortion. Demodulation ring reduces flux modulation, minimizing electromagnetic distortion. 2'' edgewound copper clad aluminum voice coil wound on high temperature glass fibre former. 100° nominal HF coverage.
Type: PA
Impedance: 8 Ohm
Power RMS: 75 W
Power RMS (Watt): 75.0
Power: 150 W
Made in: China
Power (Wa…

8'' coaxial loudspeaker providing 200Wrms (AES standard) power handling and 94dB sensitivity. Full range frequency response: 70 – 20,000Hz. FEA (Finite Element Analysis) optimized ferrite magnet assem more→bly acts as common motor for both LF and HF drivers resulting in enhanced coherence. Robust cast aluminium chassis is designed to minimize unwanted reflections, further reducing acoustic distortion. Demodulation ring reduces flux modulation, minimizing electromagnetic distortion. 2'' edgewound copper voice coil wound on high temperature glass fibre former. 100° nominal HF coverage.
Diameter (inch): 8.0
Power: 200 W
Power RMS (Watt): 100.0
Power (Watt): 200.0
Made in: China
Power RMS: 100 W
Diameter: 8"<…

Outstanding full-range sound reproduction. The Celestion FTX1225 is a coaxial driver with a nominal impedance of 8 Ohms and a total of 360W RMS power handling. Offering clear and defined audio from 50 more→Hz all the way up to 20kHz the FTX1225 is perfect for a wide variety of system applications. This high-performance driver features a coaxially-mounted 1.75 polyimide compression driver that utilises an FEA-optimised ferrite magnet assembly. This assembly acts as a common motor for the LF and the HF drivers for significantly improved coherence. The FTX1225 also features a demodulation ring that reduces flux modulation resulting in minimised electromagnetic distortion. With eight mounting slots …

The FTX1530 is a 15″ diameter cast frame common motor coaxial speaker, with a single ferrite magnet that acts as a motor for both LF and HF drivers saving space and weight. With a 3″ voice more→coil, the speaker provides a 800 W continuous / 400 W (AES standard) power rating with a 97 dB LF sensitivity (106.5 dB HF sensitivity). It incorporates a 3″ voice coil compression driver to deliver a 40 Hz to 20 kHz frequency response. An external crossover is required, directing the low and high frequency parts of the input signal to the woofer and HF driver respectively.
Diameter: 15"
Power RMS (Watt): 600.0
Made in: China
Power RMS: 600 W
Diameter (inch): 15.0
Power (Watt): 1200.0
Impedance: …

Coaxial/Twin Cone. 12" twin cone drive unit with extended high frequency response. 1.75" high temperature copper voice coil for increased reliability and 100Wrms (AES standard) power handling. Optimis more→ed cone neck/voice coil assembly for increased strength, minimising high frequency distortion and improving sound quality. Secondary cone terminated by pressure formed cloth dust cap for enhanced mid-band clarity. High efficiency magnet structure design delivers improved sensitivity. Double roll surround for greater excursion control and smooth frequency response.
Impedance: 8 Ohm
Diameter (inch): 12.0
Made in: China
Power (Watt): 100.0
Power RMS: 50 W
Type: PA
Power: 100 W
Power RMS (Watt): 50.…

Mids as they were meant to be heard. The Celestion TF0510MR is a 5 mid-range driver with a nominal impedance of 8 Ohms and a 30W RMS power rating. With the ability to reproduce mid frequencies with ou more→tstanding clarity and detail the TF0510MR is the perfect choice for a three-way multi-driver speaker system. The closed-back design prevents your low-frequency drivers backwave radiation from affecting the TF0510MRs motion eliminating the need for a separate mid-range enclosure in your cabinet. The pressed steel chassis and kevlar-loaded paper cone ensure your driver is well-protected and reliable whilst simultaneously delivering excellent acoustic performance. Easy to install using the four mounting …

6” mid-range driver with nominal impedance of 8 Ohm that provides 95 dB sensitivity and 100W RMS power rating (200 W continuous), ideal for two-way systems. It achieves optimal performance in compact more→enclosures. It features a 1.5” high temperature copper voice coil wound on polyimide former for increased reliability, vented ferrite magnet assembly for enhanced cooling and rigid pressed steel chassis design for maximum energy transfer. It is also equipped with a single suspension, polyimide former and Kevlar loaded paper cone with cloth sealed surroundings. Frequency range: 85 Hz-6 kHz. Overall diameter: 178 mm. Overall depth: 74 mm. Cut-out diameter: 147 mm. Weight: 1.4 kg.
Impedance: 8 Ohm<…