Other Sound & Hi-Fi Celestion

Efficient sound and dispersion. The Celestion H1-9040P is an exponential horn crafted from hard-wearing reinforced ABS. The H1-9040P allows the output level of your compression driver to remain balanced across its entire frequency range. With two M6 holes on a 76mm (3) PCD this high-performance horn is compatible with a vast array of flange-fitted compression drivers. Thanks to the 25.1mm (1) throat exit high-frequencies remain efficient and clear. Installation is quick and simple - the horn just bolts into the speaker enclosure with your compression driver attached. If youre looking to replace a horn thats seen better days or improve the sonic ability of your loudspeaker the Celestion

Efficient sound and dispersion. The Celestion H1SC-8050 is an exponential horn crafted from hard-wearing reinforced ABS. The H1SC-8050 allows the output level of your compression driver to remain balanced across its entire frequency range. With a screw-type (35mm / 1.38 diameter) driver mounting design this high-performance horn is compatible with a vast array of flange-fitted compression drivers. Thanks to the 25.4mm (1) throat exit high-frequencies remain efficient and clear. Installation is quick and simple - the horn just bolts into the speaker enclosure with your compression driver attached. If youre looking to replace a horn thats seen better days or improve the sonic ability of your

Efficient sound and dispersion. The Celestion H1SC-9040 is an exponential horn crafted from hard-wearing reinforced ABS. The H1SC-9040 allows the output level of your compression driver to remain balanced across its entire frequency range. With a screw-type (35mm / 1.38 diameter) driver mounting design this high-performance horn is compatible with a vast array of flange-fitted compression drivers. Thanks to the 25.1mm (1) throat exit high-frequencies remain efficient and clear. Installation is quick and simple - the horn just bolts into the speaker enclosure with your compression driver attached. If youre looking to replace a horn thats seen better days or improve the sonic ability of your

Advanced design for outstanding performance. The Celestion AN2775 is a compact 2.75 full-range driver that is perfect for use within portable line arrays. This compact driver boasts a nominal impedance of 8 Ohms and 20W RMS power handling. With a purpose-designed glass-reinforced ABS chassis and a square mounting frame the AN2775 can facilitate the close-coupling of multiple units whilst retaining maximum free air movement. The AN2775 delivers ultra-wide high-frequency dispersion whilst the rigid and lightweight aluminium cone delivers a smooth response in the critical listening band. With a half-roll elastomer surround the driver features damping for unwanted resonances whilst maintaining …

Advanced design for outstanding performance. The Celestion AN2075 is a compact 2 full-range driver that is perfect for use within portable line arrays. This compact driver boasts a nominal impedance of 8 Ohms and 20W RMS power handling. With a purpose-designed glass-reinforced ABS chassis and a square mounting frame the AN2075 can facilitate the close-coupling of multiple units whilst retaining maximum free air movement. The AN2075 delivers ultra-wide high-frequency dispersion whilst the rigid and lightweight aluminium cone delivers a smooth response in the critical listening band. With a half-roll elastomer surround the driver features damping for unwanted resonances whilst maintaining a sustained …

Efficient sound and dispersion. The Celestion H1-7050 is an exponential horn crafted from cast-aluminium. The H1-7050 allows the output level of your compression driver to remain balanced across its entire frequency range. With two M6 holes on a 76mm (3) PCD this high-performance horn is compatible with a vast array of flange-fitted compression drivers. Thanks to the 25.1mm (1) throat exit high-frequencies remain efficient and clear. The H1-7050 also features embedded elastomer side panels that make the horn acoustically inert. Installation is quick and simple - the horn just bolts into the speaker enclosure with your compression driver attached. If youre looking to replace a horn thats seen …

Flexible and efficient sonic performance. The Celestion TF0510 is a 5 multi-purpose driver with a nominal impedance of 8 Ohms and a 30W RMS power rating. With the ability to reproduce bass and mids with exceptional clarity and definition the TF0510 is an ideal choice for any 2-way or 3-way system design. An impressive extended frequency response ranging from 130Hz all the way up to 8kHz makes the TF0510 ideal for use in a vast array of applications. The pressed steel chassis and kevlar-loaded paper cone ensure your driver is well-protected and reliable whilst simultaneously delivering excellent acoustic performance. With four mounting slots the Celestion TF0510 is easy to install in cut-outs …

Hear every detail within the high frequencies of your sound. The Celestion CDX1-1445 compression driver has a 1.4 copper-clad aluminium voice coil with a ferrite magnet. Guaranteed to project your sound without sacrificing the quality. Designed to deliver pristine highs that complement well-defined low frequencies. The CDX1-1445 has a nominal impedance of 16 ohms and is capable of handling 20 watts of continuous power. If youre looking to replace a blown tweeter or improve the sonic ability of your loudspeaker the Celestion CDX1-1445 is the perfect choice.

Hear every detail within the high frequencies of your sound. The Celestion CDX1-1445 compression driver has a 1.4 copper-clad aluminium voice coil with a ferrite magnet. Guaranteed to project your sound without sacrificing the quality. Designed to deliver pristine highs that complement well-defined low frequencies. The CDX1-1445 has a nominal impedance of 8 ohms and is capable of handling 20 watts of continuous power. If youre looking to replace a blown tweeter or improve the sonic ability of your loudspeaker the Celestion CDX1-1445 is the perfect choice.

Advanced design for outstanding performance. The Celestion AN3510 is a compact 3.5 full-range driver that is perfect for use within portable line arrays. This compact driver boasts a nominal impedance of 8 Ohms and 35W RMS power handling. With a purpose-designed glass-reinforced ABS chassis and a square mounting frame the AN3510 can facilitate the close-coupling of multiple units whilst retaining maximum free air movement. The AN3510 delivers ultra-wide high-frequency dispersion whilst the rigid and lightweight aluminium cone delivers a smooth response in the critical listening band. With a half-roll elastomer surround the driver features damping for unwanted resonances whilst maintaining a …

Hear every detail within the high frequencies of your sound. The Celestion CDX1-1446 compression driver has a 1.4 copper-clad aluminium voice coil with a ferrite magnet. Guaranteed to project your sound without sacrificing the quality. Designed to deliver pristine highs that complement well-defined low frequencies. The CDX1-1446 has a nominal impedance of 8 ohms and is capable of handling 20 watts of continuous power. If youre looking to replace a blown tweeter or improve the sonic ability of your loudspeaker the Celestion CDX1-1446 is the perfect choice.

Hear every detail within the high frequencies of your sound. The Celestion CDX1-1447 compression driver has a 1.4 copper-clad aluminium voice coil with a ferrite magnet. Guaranteed to project your sound without sacrificing the quality. Designed to deliver pristine highs that complement well-defined low frequencies. The CDX1-1447 has a nominal impedance of 8 ohms and is capable of handling 35 watts of continuous power. If youre looking to replace a blown tweeter or improve the sonic ability of your loudspeaker the Celestion CDX1-1447 is the perfect choice.

Hear every detail within the high frequencies of your sound. The Celestion CDX1-1742 compression driver has a 1.75 copper-clad aluminium voice coil with a ferrite magnet. Guaranteed to project your sound without sacrificing the quality. Designed to deliver an extended frequency response with crystal-clear highs and reduced low-end distortion. The CDX1-1742 has a nominal impedance of 8 ohms and is capable of handling 50 watts of continuous power. If youre looking to replace a blown tweeter or improve the sonic ability of your loudspeaker the Celestion CDX1-1742 is the perfect choice.

Hear every detail within the high frequencies of your sound. The Celestion CDX1-1746 compression driver has a 1.75 copper-clad aluminium voice coil with a ferrite magnet. Guaranteed to project your sound without sacrificing the quality. Designed to deliver an extended frequency response with pristine highs that complement well-defined low frequencies. The CDX1-1746 has a nominal impedance of 8 ohms and is capable of handling 40 watts of continuous power. If youre looking to replace a blown tweeter or improve the sonic ability of your loudspeaker the Celestion CDX1-1746 is the perfect choice.